Tension Dynamometer PCE-DDM 5
£ 1,264.00
Price excl. VAT &. delivery
2 year Warranty
The tension dynamometer is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension dynamometer. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 5,000 kg / 50 kN / 11,023 lb
- Resolution: 2 kg / 20 N
- Minimum load: 40 kg / 88 lbs
- Supplied with remote control indicator
Weighing Hook PCE-DDM 5
£ 1,264.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-DDM 5 Weighing Hook is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 5 Weighing Hook is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 5,000 kg / 50 kN / 11,023 lbs
- Resolution: 2 kg / 20 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

Gloss Meter PCE-SGM 60-ICA incl. ISO calibration certificate
£ 1,260.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Gloss Test Instrument PCE-SGM 60-ICA incl. ISO calibration certificate
£ 1,260.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. These gloss test instruments allow you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Paint Gloss Tester PCE-SGM 60-ICA incl. ISO calibration certificate
£ 1,260.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Surface Testing - Gloss Meter PCE-SGM 60-ICA incl. ISO calibration certificate
£ 1,260.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-SGM 60 surface tester and gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Gloss Meter PCE-IGM 60 ICA incl. ISO calibration certificate
£ 1,255.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60 °. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


- Measurement geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

NDT Test Instruments PCE-IGM 60 ICA incl. ISO calibration certificate
£ 1,255.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60 °. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


- Measurement geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Paint Gloss Tester PCE-IGM 60 ICA incl. ISO calibration certificate
£ 1,255.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60 °. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


- Measurement geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Surface Testing - Gloss Meter PCE-IGM 60 ICA incl. ISO calibration certificate
£ 1,255.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60 °. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


- Measurement geometry: 60° degree angle
- Measuring range: 0 ... 1000 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Class 2 Decibel Meter PCE-428-Kit-N-ICA with Sound Calibrator incl ISO Cal Cert.
£ 1,245.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The class 2 data logging decibel meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The decibel meter is a class 2 device and is equipped with an octave band frequency filter. The decibel meter can optionally be upgraded with a 1/3 octave band filter.

- Accuracy class 2
- 1/1 octave band included
- 1/3 octave band optional
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- Including class II sound calibrator
- Including calibration certificate for sound level meter
- Including calibration certificate for sound calibrator
Class 2 Noise Meter / Sound Meter PCE-428-Kit-N-ICA incl. Calibrator + Cal Cert.
£ 1,245.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The class 2 data logging noise meter / sound meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The noise meter / sound meter is a class 2 device and is equipped with an octave band frequency filter. The noise meter / sound meter can optionally be upgraded with a 1/3 octave band filter.

- Accuracy class 2
- 1/1 octave band included
- 1/3 octave band optional
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- Including class II sound calibrator
- Including calibration certificate for sound level meter
- Including calibration certificate for sound calibrator
Class 2 SPL Meter PCE-428-Kit-N-ICA with Sound Calibrator incl. ISO Cal. Cert.
£ 1,245.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The class 2 data logging SPL meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The SPL meter is a class 2 device and is equipped with an octave band frequency filter. The SPL meter can optionally be upgraded with a 1/3 octave band filter.

- Accuracy class 2
- 1/1 octave band included
- 1/3 octave band optional
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- Including class II sound calibrator
- Including calibration certificate for sound level meter
- Including calibration certificate for sound calibrator
Condition Monitoring Sound Level Meter PCE-428-Kit-N-ICA + Calibrator + Cal Cert
£ 1,245.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The condition monitoring sound level meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The condition monitoring sound level meter is a class 2 device and is equipped with an octave band frequency filter. The condition monitoring sound level meter can optionally be upgraded with a 1/3 octave band filter.

- Accuracy class 2
- 1/1 octave band included
- 1/3 octave band optional
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- Including class II sound calibrator
- Including calibration certificate for sound level meter
- Including calibration certificate for sound calibrator
Data Logger with USB PCE-428-Kit-N-ICA with Sound Calibrator incl ISO Cal. Cert.
£ 1,245.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The data Logger with USB interface is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The data Logger with USB interface is a class 2 device and is equipped with an octave band frequency filter. The data Logger with USB interface can optionally be upgraded with a 1/3 octave band filter.

- Accuracy class 2
- 1/1 octave band included
- 1/3 octave band optional
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- Including class II sound calibrator
- Including calibration certificate for sound level meter
- Including calibration certificate for sound calibrator
Dynamometer PCE-DFG 100K X
£ 1,245.00
Price excl. VAT &. delivery
2 year Warranty
The dynamometer records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The dynamometer is supplied with an external measuring cell and can measure forces of up to 100 kN.

- Measuring range: 0 ... 100 kN
- Resolution: 10 N
- Accuracy: ±0.05 % F.S.
- 32 GB memory for 30 million measuring points
- USB-C interface
- Graphic display
- Measuring rate: 1 ... 7200 Hz
Environmental Meter PCE-428-Kit-N-ICA with Sound Calibrator incl. ISO Cal. Cert.
£ 1,245.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The environmental meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The environmental meter is a class 2 device and is equipped with an octave band frequency filter. The environmental meter can optionally be upgraded with a 1/3 octave band filter.

- Accuracy class 2
- 1/1 octave band included
- 1/3 octave band optional
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- Including class II sound calibrator
- Including calibration certificate for sound level meter
- Including calibration certificate for sound calibrator
Environmental Tester PCE-428-Kit-N-ICA with Sound Calibrator incl ISO Cal. Cert.
£ 1,245.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The environmental tester is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The environmental tester is a class 2 device and is equipped with an octave band frequency filter. The environmental tester can optionally be upgraded with a 1/3 octave band filter.

- Accuracy class 2
- 1/1 octave band included
- 1/3 octave band optional
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- Including class II sound calibrator
- Including calibration certificate for sound level meter
- Including calibration certificate for sound calibrator