Industrial Measurement Products and Solutions
Order no.: PCE-OCM 10
The automotive tester PCE-OCM 10 is characterized by the OLED display. The OLED display on this automotive tester allows the display itself to be read in the dark, as it is self-luminous. 

- Measurable up to 600 A
- Clamp with multimeter functions
- OLED display
- NCV function
- TRMS AC A
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-186 CB
The cable detector PCE-186 CB consists of a transmitter and a receiver. The transmitter of the cable detector has many functions. For example, the cable detector can be used to find wires in walls or break cables.

- Voltage measurement AC / DC
- For detection of line interruptions
- Cable tracking in walls and cable duct
- Different beeps
- Resistance measurement
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-186 CB
The cable fault meter PCE-186 CB consists of a transmitter and a receiver. The transmitter of the cable fault meter has many functions. For example, the cable fault meter can be used to find wires in walls or break cables.

- Voltage measurement AC / DC
- For detection of line interruptions
- Cable tracking in walls and cable duct
- Different beeps
- Resistance measurement
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-186 CB
The cable locator PCE-186 CB consists of a transmitter and a receiver. The transmitter of the cable locator has many functions. For example, the cable locator can be used to find wires in walls or break cables.

- Voltage measurement AC / DC
- For detection of line interruptions
- Cable tracking in walls and cable duct
- Different beeps
- Resistance measurement
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-OCM 10
The clamp meter PCE-OCM 10 is characterized by the OLED display. The OLED display on this clamp meter allows the display itself to be read in the dark, as it is self-luminous. 

- Measurable up to 600 A
- Clamp with multimeter functions
- OLED display
- NCV function
- TRMS AC A
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-OCM 10
The clamp on tester PCE-OCM 10 is characterized by the OLED display. The OLED display on this clamp on tester allows the display itself to be read in the dark, as it is self-luminous. 

- Measurable up to 600 A
- Clamp with multimeter functions
- OLED display
- NCV function
- TRMS AC A
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CMM 10
The CO2 analyzer PCE-CMM 10 is a multi-function meter for measuring the air quality. This CO2 analyzer measures synchronously the CO2 concentration, the air temperature and the humidity. 

- Measuring range CO2: 400 ... 5000 ppm
- Measuring range temperature: -10.0 ... 50.0°C / 14 ... 122°F
- Measuring range humidity: 0 ... 99% rh
- Battery operation
- Limit exceeded
- Beep
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LT 15
The current calibrator PCE-LT 15 is a combination device which detects configuration errors in the network and can be used as a current calibrator at the same time. Thus, the periphery of a network can be quickly checked with the LAN tester. 

Measuring function:
- AC voltage: 750V
- DC voltage: 1000V
- Resistance: 4 MΩ
- Continuity test: 400 Ω
- Electrical safety: CAT III 600V
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P30

PCE-P30 is a digital differential pressure manometer used to measure gauge pressure and true differential pressure in pneumatic, hydraulic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. 11 pressure units are selectable for Imperial and Metric measurement, including bar, mmHg, ozin², kgcm², psi, inH2, kPa, ftH2O|, inHg, cmH2Oand mbar.


- Pressure measuring range: 0 to 2.068 bar / 0 to 30 psi
- Resolution: 0.001 bar / 0.02 psi
- Accuracy: ± 0.3% of full scale at 25°C / 77°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P30

PCE-P30 is a differential pressure meter used to measure gauge pressure and true differential pressure in pneumatic, hydraulic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. 11 pressure units are selectable for Imperial and Metric measurement, including bar, mmHg, ozin², kgcm², psi, inH2, kPa, ftH2O|, inHg, cmH2O and mbar.

- Pressure measuring range: 0 to 2.068 bar / 0 to 30 psi
- Resolution: 0.001 bar / 0.02 psi
- Accuracy: ± 0.3% of full scale at 25°C / 77°F

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LT 15
The digital multimeter PCE-LT 15 is a combination device which detects configuration errors in the network and can be used as a digital multimeter at the same time. Thus, the periphery of a network can be quickly checked with the LAN tester. 

Measuring function:
- AC voltage: 750V
- DC voltage: 1000V
- Resistance: 4 MΩ
- Continuity test: 400 Ω
- Electrical safety: CAT III 600V
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-OCM 10
The digital multimeter PCE-OCM 10 is characterized by the OLED display. The OLED display on this digital multimeter allows the display itself to be read in the dark, as it is self-luminous. 

- Measurable up to 600 A
- Clamp with multimeter functions
- OLED display
- NCV function
- TRMS AC A
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CMM 10
The digital thermometer PCE-CMM 10 is a multi-function meter for measuring the air quality. This digital thermometer measures synchronously the CO2 concentration, the air temperature and the humidity. 

- Measuring range CO2: 400 ... 5000 ppm
- Measuring range temperature: -10.0 ... 50.0°C / 14 ... 122°F
- Measuring range humidity: 0 ... 99% rh
- Battery operation
- Limit exceeded
- Beep
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IT100
The electrical tester PCE-IT100 detects with auxiliary voltages of 125V, 250V, 500V and 1000V insulation resistors up to max. 4000 MΩ. Furthermore, the measurement of low-resistance resistors up to 400 Ω and a measurement function for alternating and also DC voltages is offered by this electrical tester.

- AC voltage (40 ... 400 Hz): 750V
- DC voltage: 1000V
- Resistance: 40 Ω / 400 Ω
- Insulation resistance: 4 MΩ / 40 MΩ / 400 MΩ / 4000 MΩ
- 4 different test voltages up to 1 kV
- Auto power-off function
- Safety: EN 61010-1, CAT III 1000V
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LT 15
The electrical tester PCE-LT 15 is a combination device which detects configuration errors in the network and can be used as a electrical tester at the same time. Thus, the periphery of a network can be quickly checked with the LAN tester. 

Measuring function:
- AC voltage: 750V
- DC voltage: 1000V
- Resistance: 4 MΩ
- Continuity test: 400 Ω
- Electrical safety: CAT III 600V
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CMM 10
The environmental meter PCE-CMM 10 is a multi-function meter for measuring the air quality. This environmental meter measures synchronously the CO2 concentration, the air temperature and the humidity. 

- Measuring range CO2: 400 ... 5000 ppm
- Measuring range temperature: -10.0 ... 50.0°C / 14 ... 122°F
- Measuring range humidity: 0 ... 99% rh
- Battery operation
- Limit exceeded
- Beep
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PHM 14-ICA
The Environmental Meter PCE-PHM 14 is designed for permanent monitoring of the pH value. The environmental meter PCE-PHM 14 has a backlit LC display that is easy to read remotely. The environmental meter is equipped with an automatic calibration function at pH 4, 7 and 10. This means that the meter automatically detects the buffer solution and calibrates itself.


- Measuring range: 0 ... 14 pH
- Resolution: 0.01 pH
- Compact device for wall mounting
- Internal calibration function
- Ideal for continuous monitoring
- Incl. PH electrode PE - 03
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CMM 10
The environmental tester PCE-CMM 10 is a multi-function meter for measuring the air quality. This environmental tester measures synchronously the CO2 concentration, the air temperature and the humidity. 

- Measuring range CO2: 400 ... 5000 ppm
- Measuring range temperature: -10.0 ... 50.0°C / 14 ... 122°F
- Measuring range humidity: 0 ... 99% rh
- Battery operation
- Limit exceeded
- Beep
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PHM 14-ICA
The Environmental Tester PCE-PHM 14 is designed for permanent monitoring of the pH value. The environmental tester PCE-PHM 14 has a backlit LC display that is easy to read remotely. The environmental tester is equipped with an automatic calibration function at pH 4, 7 and 10. This means that the device automatically detects the buffer solution and calibrates itself.


- Measuring range: 0 ... 14 pH
- Resolution: 0.01 pH
- Compact device for wall mounting
- Internal calibration function
- Ideal for continuous monitoring
- Incl. PH electrode PE - 03
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CMM 10
The gas detector PCE-CMM 10 is a multi-function meter for measuring the air quality. This gas detector measures synchronously the CO2 concentration, the air temperature and the humidity. 

- Measuring range CO2: 400 ... 5000 ppm
- Measuring range temperature: -10.0 ... 50.0°C / 14 ... 122°F
- Measuring range humidity: 0 ... 99% rh
- Battery operation
- Limit exceeded
- Beep
Manufacturer: PCE Instruments
Test Instruments manufacturer