Industrial Measurement Products and Solutions
Order no.: PCE-2900-ICA

The durometer PCE-2900 has been developed for hardness measurements on metallic materials. The durometer PCE-2900 measures the material hardness in Vickers, Brinell, Rockwell, Leeb and Shore. The durometer PCE-2900 measures the hardness according to the Leeb rebound principle. 

- Measurement according to Leeb Rebound method
- Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
- Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
- Accuracy: ± 0.5%, Repeatability: ± 0.6%
- Impactor: Type D
- USB and WiFi for data transmission
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-2900-ICA

The hardness tester PCE-2900 has been developed for hardness measurements on metallic materials. The hardness tester PCE-2900 measures the material hardness in Vickers, Brinell, Rockwell, Leeb and Shore. The hardness tester PCE-2900 measures the hardness according to the Leeb rebound principle. 

- Measurement according to Leeb Rebound method
- Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
- Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
- Accuracy: ± 0.5%, Repeatability: ± 0.6%
- Impactor: Type D
- USB and WiFi for data transmission
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-2900-ICA

The material hardness tester PCE-2900 has been developed for hardness measurements on metallic materials. The material hardness tester PCE-2900 measures the material hardness in Vickers, Brinell, Rockwell, Leeb and Shore. The material hardness tester PCE-2900 measures the hardness according to the Leeb rebound principle. 

- Measurement according to Leeb Rebound method
- Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
- Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
- Accuracy: ± 0.5%, Repeatability: ± 0.6%
- Impactor: Type D
- USB and WiFi for data transmission
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-2900-ICA

The hardness tester PCE-2900 has been developed for hardness measurements on metallic materials. The hardness tester PCE-2900 measures the material hardness in Vickers, Brinell, Rockwell, Leeb and Shore. The hardness tester PCE-2900 measures the hardness according to the Leeb rebound principle. 

- Measurement according to Leeb Rebound method
- Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
- Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
- Accuracy: ± 0.5%, Repeatability: ± 0.6%
- Impactor: Type D
- USB and WiFi for data transmission
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 4

This color meter is especially designed for meat, food, vegetables or wet products testing. Only the aperture comes into contact with the surfaces to be measured. So it is guaranteed that no liquids can cause cross contamination while doing the measurement. The color meter simulates to see surfaces like with human eyes.


- Measuring aperture of 20 mm and 45°/0° illumination/viewing angle
- Rechargeable lithium-ion battery
- Auto white black calibration
- Designed specifically for the food industry
- Software included

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 4

This Colorimeter is especially designed for meat, food, vegetables or wet products testing. Only the aperture comes into contact with the surfaces to be measured. So it is guaranteed that no liquids can cause cross contamination while doing the measurement. The colorimeter simulates to see surfaces like with human eyes. Used mainly in the medical and food industry the color test instrument in addition meets all requirements for plastics surface measurements (PP, PE, PET, ABS, EVA) and also powders. The color meter is delivered manufacturer calibrated, but can optionally be certified to ISO standards.


- Measuring aperture of 20 mm and 45°/0° illumination/viewing angle
- Rechargeable lithium-ion battery
- Auto white black calibration
- Designed specifically for the food industry
- Software included

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-NDL-LEQ-KIT

PCE-NDL-LEQ-KIT is a data logging noise meter / sound meter kit with acoustic calibrator. The kit includes the Class 2 Noise Meter PCE-428, the Noise Meter PCE-NDL 10 and the Sound Calibrator PCE-SC 42.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-NDL-LEQ-KIT

PCE-NDL-LEQ-KIT is a data logging sound level meter kit with acoustic calibrator. The kit includes the Class 2 Sound Level Meter PCE-428, the Sound Level Meter PCE-NDL 10 and the Sound Calibrator PCE-SC 42.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 4

This Colorimeter is especially designed for meat, food, vegetables or wet products testing. Only the aperture comes into contact with the surfaces to be measured. So it is guaranteed that no liquids can cause cross contamination while doing the measurement. 

- Measuring aperture of 20 mm and 45°/0° illumination/viewing angle
- Rechargeable lithium-ion battery
- Auto white black calibration
- Stable performance
- Measurement of different colors
- Application for many surfaces
- Simple user interface
- Software included

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TTM 10

The screw cap torque meter PCE-TTM 5 is used for testing the torque on various kinds of screw caps. That screw cap torque tester determines quickly and with certainty the required expenditure of force for opening and closing screw caps. Therefore the course of the torque test is recorded continuously, so that the results can be evaluated either at the screw cap torque tester itself or on a computer.


- Measurement range: 10 Nm / 1,000 Ncm / 1000 gfm / 100 lbfin
- Measuring resolution: 0.01 Nm / 1 Ncm / 1 gfm / 0.1 lbfin
- Measuring speed up to 1,000 Hz
- For rotation to left or right side

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TTM 2

The screw cap torque meter PCE-TTM 2 is used for testing the torque on various kinds of screw caps. That screw cap torque tester determines quickly and with certainty the required expenditure of force for opening and closing screw caps. Therefore the course of the torque test is recorded continuously, so that the results can be evaluated either at the screw cap torque tester itself or on a computer.


- Measurement range: 2 Nm / 200 Ncm / 200 gfm / 20 lbfin
- Measuring resolution: 0.001 Nm / 0.1 Ncm / 0.1 gfm / 0.01 lbfin
- Measuring speed up to 1,000 Hz
- For rotation to left or right side

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TTM 5

The screw cap torque meter PCE-TTM 5 is used for testing the torque on various kinds of screw caps. That screw cap torque tester determines quickly and with certainty the required expenditure of force for opening and closing screw caps. Therefore the course of the torque test is recorded continuously, so that the results can be evaluated either at the screw cap torque tester itself or on a computer.


- Measurement range: 5 Nm / 500 Ncm / 500 gfm / 50 lbfin
- Measuring resolution: 0.001 Nm / 0.1 Ncm / 0.1 gfm / 0.01 lbfin
- Measuring speed up to 1,000 Hz
- For rotation to left or right side

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 355N

The PCE-VE 355N is a two-way articulating industrial borescope, inspection camera, industrial endoscope or videoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.


- 2-way camera probe
- Diameter camera head: Ø 4.5mm / 0.18"
- Interface: Mini-USB 1.1 und AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 1.5 m / 4ft 11"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 355N

The PCE-VE 355N is a two-way articulating inspection camera, industrial endoscope, borescope or videoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.


- 2-way camera probe
- Diameter camera head: Ø 4.5mm / 0.18"
- Interface: Mini-USB 1.1 und AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 1.5 m / 4ft 11"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 355N

The PCE-VE 355N is a two-way articulating videoscope, borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.


- 2-way camera probe
- Diameter camera head: Ø 4.5mm / 0.18"
- Interface: Mini-USB 1.1 und AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 1.5 m / 4ft 11"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: TXgard-IS+O3

The TXgard-IS+O3 is a single-gas Gas Leak Detector used to warn for gases (Ozone, O3, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ozone, O3, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: TXgard-IS+PH3

The TXgard-IS+PH3 is a single-gas Gas Leak Detector used to warn for gases (Phosphine, PH3, 0 ... 2 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Phosphine, PH3, 0 ... 2 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: AQ-500 Set OZL

Gas Detector AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZL included in delivery (0-0.5 ppm)
- Alarm function
- Data logger

 

Manufacturer: Aeroqual
Test Instruments manufacturer
Order no.: AQ-500 Set OZL

Ozone Meter AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Ozone Meter can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZL included in delivery (0-0.5 ppm)
- Alarm function
- Data logger

 

Manufacturer: Aeroqual
Test Instruments manufacturer
Order no.: TXgard-IS+O3

The TXgard-IS+O3 is a single-gas Gas detector used to warn for gases (Ozone, O3, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Ozone, O3, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer