Industrial Measurement Products and Solutions
Order no.: PCE-DDM 10WI-ICA

The PCE-DDM 10WI Crane Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 10WI Crane Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 10,000 kg / 100 kN / 22,046 lbs
- Resolution: 5 kg / 50 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control indicator
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 10WI-ICA

The PCE-DDM 10WI Hanging Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 10WI Hanging Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 10,000 kg / 100 kN / 22,046 lbs
- Resolution: 5 kg / 50 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control indicator
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 10WI-ICA

The PCE-DDM 10WI weighing hook is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 10WI weighing hook is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 10,000 kg / 100 kN / 22,046 lbs
- Resolution: 5 kg / 50 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control indicator
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 4

This color meter is especially designed for meat, food, vegetables or wet products testing. Only the aperture comes into contact with the surfaces to be measured. So it is guaranteed that no liquids can cause cross contamination while doing the measurement. The color meter simulates to see surfaces like with human eyes.


- Measuring aperture of 20 mm and 45°/0° illumination/viewing angle
- Rechargeable lithium-ion battery
- Auto white black calibration
- Designed specifically for the food industry
- Software included

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 4

This Colorimeter is especially designed for meat, food, vegetables or wet products testing. Only the aperture comes into contact with the surfaces to be measured. So it is guaranteed that no liquids can cause cross contamination while doing the measurement. The colorimeter simulates to see surfaces like with human eyes. Used mainly in the medical and food industry the color test instrument in addition meets all requirements for plastics surface measurements (PP, PE, PET, ABS, EVA) and also powders. The color meter is delivered manufacturer calibrated, but can optionally be certified to ISO standards.


- Measuring aperture of 20 mm and 45°/0° illumination/viewing angle
- Rechargeable lithium-ion battery
- Auto white black calibration
- Designed specifically for the food industry
- Software included

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-NDL-LEQ-KIT

PCE-NDL-LEQ-KIT is a data logging noise meter / sound meter kit with acoustic calibrator. The kit includes the Class 2 Noise Meter PCE-428, the Noise Meter PCE-NDL 10 and the Sound Calibrator PCE-SC 42.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-NDL-LEQ-KIT

PCE-NDL-LEQ-KIT is a data logging sound level meter kit with acoustic calibrator. The kit includes the Class 2 Sound Level Meter PCE-428, the Sound Level Meter PCE-NDL 10 and the Sound Calibrator PCE-SC 42.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 4

This Colorimeter is especially designed for meat, food, vegetables or wet products testing. Only the aperture comes into contact with the surfaces to be measured. So it is guaranteed that no liquids can cause cross contamination while doing the measurement. 

- Measuring aperture of 20 mm and 45°/0° illumination/viewing angle
- Rechargeable lithium-ion battery
- Auto white black calibration
- Stable performance
- Measurement of different colors
- Application for many surfaces
- Simple user interface
- Software included

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 355N

The PCE-VE 355N is a two-way articulating industrial borescope, inspection camera, industrial endoscope or videoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.


- 2-way camera probe
- Diameter camera head: Ø 4.5mm / 0.18"
- Interface: Mini-USB 1.1 und AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 1.5 m / 4ft 11"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 355N

The PCE-VE 355N is a two-way articulating inspection camera, industrial endoscope, borescope or videoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.


- 2-way camera probe
- Diameter camera head: Ø 4.5mm / 0.18"
- Interface: Mini-USB 1.1 und AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 1.5 m / 4ft 11"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 355N

The PCE-VE 355N is a two-way articulating videoscope, borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.


- 2-way camera probe
- Diameter camera head: Ø 4.5mm / 0.18"
- Interface: Mini-USB 1.1 und AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 1.5 m / 4ft 11"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: TXgard-IS+O3

The TXgard-IS+O3 is a single-gas Gas Leak Detector used to warn for gases (Ozone, O3, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ozone, O3, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: TXgard-IS+PH3

The TXgard-IS+PH3 is a single-gas Gas Leak Detector used to warn for gases (Phosphine, PH3, 0 ... 2 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Phosphine, PH3, 0 ... 2 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: AQ-500 Set OZL

Gas Detector AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZL included in delivery (0-0.5 ppm)
- Alarm function
- Data logger

 

Manufacturer: Aeroqual
Test Instruments manufacturer
Order no.: AQ-500 Set OZL

Ozone Meter AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Ozone Meter can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZL included in delivery (0-0.5 ppm)
- Alarm function
- Data logger

 

Manufacturer: Aeroqual
Test Instruments manufacturer
Order no.: TXgard-IS+O3

The TXgard-IS+O3 is a single-gas Gas detector used to warn for gases (Ozone, O3, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Ozone, O3, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: TXgard-IS+PH3

The TXgard-IS+PH3 is a single-gas Gas detector used to warn for gases (Phosphine, PH3, 0 ... 2 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Phosphine, PH3, 0 ... 2 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: PCE-DFG N 100TW-ICA
The torque meter consists of a hand-held measuring device and an external torque transducer. The torque wrench tester is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 100 Nm
- Resolution: 0.1 Nm
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG N 10TW-ICA
The torque meter consists of a hand-held measuring device and an external torque transducer. The torque wrench tester is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 10 Nm
- Resolution: 0.005 Nm
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG N 50TW-ICA
The torque meter consists of a hand-held measuring device and an external torque transducer. The torque wrench tester is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 50 Nm
- Resolution: 0.01 Nm
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)
Manufacturer: PCE Instruments
Test Instruments manufacturer