Paint Gloss Tester PCE-SGM 60-ICA incl. ISO calibration certificate
£ 1,260.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


  • Measurement geometry: 60° degree angle
  • Measurement up to 1000 gloss units
  • Internal reading memory up to 5000 readings
  • 3.5" TFT display
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate

Surface Testing - Gloss Meter PCE-SGM 60-ICA incl. ISO calibration certificate
£ 1,260.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-SGM 60 surface tester and gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


  • Measurement geometry: 60° degree angle
  • Measurement up to 1000 gloss units
  • Internal reading memory up to 5000 readings
  • 3.5" TFT display
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate

Gloss Meter PCE-IGM 60 ICA incl. ISO calibration certificate
£ 1,255.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60 °. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


  • Measurement geometry: 60° degree angle
  • Measuring range: 0 … 300 GU
  • Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate

NDT Test Instruments PCE-IGM 60 ICA incl. ISO calibration certificate
£ 1,255.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60 °. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


  • Measurement geometry: 60° degree angle
  • Measuring range: 0 … 300 GU
  • Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate

Paint Gloss Tester PCE-IGM 60 ICA incl. ISO calibration certificate
£ 1,255.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60 °. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


  • Measurement geometry: 60° degree angle
  • Measuring range: 0 … 300 GU
  • Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate

Surface Testing - Gloss Meter PCE-IGM 60 ICA incl. ISO calibration certificate
£ 1,255.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60 °. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


  • Measurement geometry: 60° degree angle
  • Measuring range: 0 … 1000 GU
  • Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate

Force Gage PCE-DFG 20K X-ICA incl. ISO-Calibration Certificate
£ 1,252.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Force Gage records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The Force Gage is supplied with an external measuring cell and can measure forces of up to 20 kN.

  • Measuring range: 0 ... 20 kN
  • Resolution: 2 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Force Gage PCE-DFG 50K X-ICA incl. ISO-Calibration Certificate
£ 1,252.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Force Gage records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces of up to 50 kN.

  • Measuring range: 0 ... 50 kN
  • Resolution: 5 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Force Gauge / Digital Force Gauge PCE-DFG 20K X-ICA incl. ISO-Calibration Certificate
£ 1,252.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Force Gauge / Digital Force Gauge records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The Force Gauge / Digital Force Gauge is supplied with an external measuring cell and can measure forces of up to 20 kN.

  • Measuring range: 0 ... 20 kN
  • Resolution: 2 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Force Gauge / Digital Force Gauge PCE-DFG 50K X-ICA incl. ISO-Calibration Certificate
£ 1,252.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Force Gauge / Digital Force Gauge records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces of up to 50 kN.

  • Measuring range: 0 ... 50 kN
  • Resolution: 5 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Tensile Tester PCE-DFG 20K X-ICA incl. ISO-Calibration Certificate
£ 1,252.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Tensile Tester records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The Tensile Tester is supplied with an external measuring cell and can measure forces of up to 20 kN.

  • Measuring range: 0 ... 20 kN
  • Resolution: 2 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Tensile Tester PCE-DFG 50K X-ICA incl. ISO-Calibration Certificate
£ 1,252.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Tensile Tester records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces of up to 50 kN.

  • Measuring range: 0 ... 50 kN
  • Resolution: 5 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Tension Dynamometer / Tension Load Cell PCE-DFG 20K X-ICA incl. ISO-Calibration Certificate
£ 1,252.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Tension Tension Dynamometer / Tension Load Cell / Tension Load Cell records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The Tension Tension Dynamometer / Tension Load Cell / Tension Load Cell is supplied with an external measuring cell and can measure forces of up to 20 kN.

  • Measuring range: 0 ... 20 kN
  • Resolution: 2 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Tension Dynamometer / Tension Load Cell PCE-DFG 50K X-ICA incl. ISO-Calibration Certificate
£ 1,252.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Tension Tension Dynamometer / Tension Load Cell / Tension Load Cell records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces of up to 50 kN.

  • Measuring range: 0 ... 50 kN
  • Resolution: 5 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Force Gage PCE-DFG N 100K
£ 1,246.00
Price excl. VAT &. delivery
2 year Warranty

The force gage PCE-DFG N 100K measures both tensile forces and compressive forces with a very high resolution and sampling rate. The force gage helps to determine the yield strengths, the tear-off force and is used wherever acting forces have to be documented.

  • Measuring range: 0 … 100 kN / 100,000 N
  • Resolution: 10 N
  • Accuracy: ± 1% of the measuring range
  • Memory for 100 measurements
  • USB interface
  • Graphic display

Force Gage PCE-DFG N 20K-ICA incl. ISO Calibration Certificate
£ 1,246.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The force gage PCE-DFG N 20K-ICA measures both tensile forces and compressive forces with a very high resolution and sampling rate. The force gage helps to determine the yield strengths, the tear-off force and is used wherever acting forces have to be documented.

  • Measuring range: 0 … 20 kN / 20,000 N
  • Resolution: 0.002 kN / 2 N
  • Accuracy: ± 0.2% of the measuring range
  • Memory for 100 measurements
  • USB interface
  • Graphic display
  • Including ISO calibration certificate

Force Gauge PCE-DFG N 20K-ICA incl. ISO Calibration Certificate
£ 1,246.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The force gauge PCE-DFG N 20K-ICA measures both tensile forces and compressive forces with a very high resolution and sampling rate. The force gauge helps to determine the yield strengths, the tear-off force and is used wherever acting forces have to be documented.

  • Measuring range: 0 … 20 kN / 20,000 N
  • Resolution: 0.002 kN / 2 N
  • Accuracy: ± 0.2% of the measuring range
  • Memory for 100 measurements
  • USB interface
  • Graphic display
  • Including ISO calibration certificate

Class 2 Decibel Meter PCE-428-Kit-N-ICA with Sound Calibrator incl ISO Cal Cert.
£ 1,245.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The class 2 data logging decibel meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The decibel meter is a class 2 device and is equipped with an octave band frequency filter. The decibel meter can optionally be upgraded with a 1/3 octave band filter.

  • Accuracy class 2
  • 1/1 octave band included
  • 1/3 octave band optional
  • A, B, C & Z frequency weighting
  • Fast, Slow, Impulse and Peak time weighting
  • Statistics function
  • Including class II sound calibrator
  • Including calibration certificate for sound level meter
  • Including calibration certificate for sound calibrator