Industrial Measurement Products and Solutions
Order no.: PCE-VE 355N

The PCE-VE 355N is a two-way articulating industrial borescope, inspection camera, industrial endoscope or videoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.


- 2-way camera probe
- Diameter camera head: Ø 4.5mm / 0.18"
- Interface: Mini-USB 1.1 und AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 1.5 m / 4ft 11"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 355N

The PCE-VE 355N is a two-way articulating inspection camera, industrial endoscope, borescope or videoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.


- 2-way camera probe
- Diameter camera head: Ø 4.5mm / 0.18"
- Interface: Mini-USB 1.1 und AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 1.5 m / 4ft 11"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 355N

The PCE-VE 355N is a two-way articulating videoscope, borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.


- 2-way camera probe
- Diameter camera head: Ø 4.5mm / 0.18"
- Interface: Mini-USB 1.1 und AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 1.5 m / 4ft 11"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: TXgard-IS+O3

The TXgard-IS+O3 is a single-gas Gas Leak Detector used to warn for gases (Ozone, O3, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ozone, O3, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: TXgard-IS+PH3

The TXgard-IS+PH3 is a single-gas Gas Leak Detector used to warn for gases (Phosphine, PH3, 0 ... 2 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Phosphine, PH3, 0 ... 2 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: AQ-500 Set OZL

Gas Detector AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZL included in delivery (0-0.5 ppm)
- Alarm function
- Data logger

 

Manufacturer: Aeroqual
Test Instruments manufacturer
Order no.: AQ-500 Set OZL

Ozone Meter AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Ozone Meter can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZL included in delivery (0-0.5 ppm)
- Alarm function
- Data logger

 

Manufacturer: Aeroqual
Test Instruments manufacturer
Order no.: TXgard-IS+O3

The TXgard-IS+O3 is a single-gas Gas detector used to warn for gases (Ozone, O3, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Ozone, O3, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: TXgard-IS+PH3

The TXgard-IS+PH3 is a single-gas Gas detector used to warn for gases (Phosphine, PH3, 0 ... 2 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Phosphine, PH3, 0 ... 2 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: AQ-500 Set EOZ

Ozone Meter AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Ozone Meter can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head EOZ included in delivery (Ozone 0-10 ppm)
- Alarm function
- Data logger

 

Manufacturer: Aeroqual
Test Instruments manufacturer
Order no.: PCE-FB 10TS

The torque meter serves for detection of the loosening torque as well as for tightening of screws. Simultaneously the torque meter can be used as a monitoring instrument. The torque test instrument provides a keyed chuck with two steady handles.


- Measuring range: 10 Nm (1 kgf-m)
- Max. 0,5 % accuracy from the measuring range
- Measuring rate freely adjustable up to 1000 Hz
- 24 Bit Processor
- Keyed chuck up to Ø 13 mm

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FB 2TS

The torque meter serves for detection of the loosening torque as well as for tightening of screws. Simultaneously the torque meter can be used as a monitoring instrument. The torque test instrument provides a keyed chuck with two steady handles.


- Measuring range: 2 Nm (0,2 kgf-m)
- Max. 0,5 % accuracy from the measuring range
- Measuring rate freely adjustable up to 1000 Hz
- 24 Bit Processor
- Keyed chuck up to Ø 13 mm

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FB 5TS

The torque meter serves for detection of the loosening torque as well as for tightening of screws. Simultaneously the torque meter can be used as a monitoring instrument. The torque test instrument provides a keyed chuck with two steady handles.


- Measuring range: 5 Nm (0,5 kgf-m)
- Max. 0,5 % accuracy from the measuring range
- Measuring rate freely adjustable up to 1000 Hz
- 24 Bit Processor
- Keyed chuck up to Ø 13 mm

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 350HR3

PCE-VE 350HR3 is a two-way articulating industrial borescope for engine and turbine inspection, and for the non-destructive inspection (NDI) of other hard-to-reach places. The waterproof camera head of this type of industrial borescope features 6 LED lights (4 front, 2 side) for optimal illumination. In addition, digital image magnification or zoom of up to 2 times is available, plus boost functionality for improved image quality in the dark.


- With boost function: better images in dark surroundings
- 2 additional side LEDs for better lighting
- Image rotation possible
- Diameter: Ø 6 mm / 0.24"
- 2-way camera
- Memory: 8 GB SD memory card (incl.)
- Cable length: 3 m / 9ft 10"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 350HR3

PCE-VE 350HR3 is a two-way articulating inspection camera, industrial endoscope, borescope or videoscope for the non-destructive inspection (NDI) of hard-to-reach places. The waterproof camera head features 6 LED lights (4 front, 2 side) for optimal illumination. In addition, digital image magnification or zoom of up to 2 times is available, plus boost functionality for improved image quality in the dark.


- With boost function: better images in dark surroundings
- 2 additional side LEDs for better lighting
- Image rotation possible
- Diameter: Ø 6 mm / 0.24"
- 2-way camera
- Memory: 8 GB SD memory card (incl.)
- Cable length: 3 m / 9ft 10"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 350HR3

PCE-VE 350HR3 is a two-way articulating inspection snake camera, industrial endoscope, borescope or videoscope for the non-destructive inspection (NDI) of hard-to-reach places. The waterproof camera head features 6 LED lights (4 front, 2 side) for optimal illumination. In addition, digital image magnification or zoom of up to 2 times is available, plus boost functionality for improved image quality in the dark.


- With boost function: better images in dark surroundings
- 2 additional side LEDs for better lighting
- Image rotation possible
- Diameter: Ø 6 mm / 0.24"
- 2-way camera
- Memory: 8 GB SD memory card (incl.)
- Cable length: 3 m / 9ft 10"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 350HR3

PCE-VE 350HR3 is a two-way articulating videoscope, industrial endoscope, borescope or inspection camera for the non-destructive inspection (NDI) of hard-to-reach places. The waterproof camera head features 6 LED lights (4 front, 2 side) for optimal illumination. In addition, digital image magnification or zoom of up to 2 times is available, plus boost functionality for improved image quality in the dark.


- With boost function: better images in dark surroundings
- 2 additional side LEDs for better lighting
- Image rotation possible
- Diameter: Ø 6 mm / 0.24"
- 2-way camera
- Memory: 8 GB SD memory card (incl.)
- Cable length: 3 m / 9ft 10"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 3000B

The floor scale PCE-SD..B is a verifiable weighing balance that is intended for flexible use. Due to the flexibly movable weighing beam (4 m), the floor scale is well suited for weighing large objects, and non-standard pallet sizes can also be weighed quickly and conveniently.

 

- Weighing range : 3000 kg
- Readability: 1 kg
- Calibration value: 1 kg
- Verifiable M III

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IS03

The industrial scales PCE-IS03 are professional systems for counting, and consists of a quantity and a reference scale. The reference scale takes on the smallest components while the balance calculates the number of pieces. This industrial scales are particularly well suited for inventories.


- Weighing scale capacity: 300 kg
- Weighing scale readability: 100 g
- Reference scale capacity: 2,000 g
- Reference scale readability: 0.01 g

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IS03

The package scale PCE-IS03 is a professional system for counting, and consists of a quantity and a reference scale. The reference scale takes on the smallest components while the balance calculates the number of pieces. This package scale is particularly well suited for inventories.


- Weighing scale capacity: 300 kg
- Weighing scale readability: 100 g
- Reference scale capacity: 2,000 g
- Reference scale readability: 0.01 g

 

Manufacturer: PCE Instruments
Test Instruments manufacturer