Order no.: PCE-TPWLKM

The PCE-TPWLKM Pallet Scales are verified forklift that integrates a scale of two ranges. It is  verified by Trade Class M III, with a weight range up to 2000 kg. The Pallet Scales have a resolution of 0.5 kg to 1000 kg and between 1000 kg and 2000 kg a resolution of 1kg. The accuracy of the Pallet Scales is very high, as the tolerance value is 0.1% of the weighed value. This accuracy is confirmed by the verification. The Pallet Scales have a high contrast LCD display, with 25 mm digits, and it is integrated in a stainless steel housing with IP 68.


- Two weighing ranges for high accuracy
- Accuracy of ±0.1 % of the weighed value
- IP 68 protection type
- 25 mm stainless steel screen


Manufacturer: Dini Argeo GmbH
Test Instruments manufacturer
Order no.: PCE-TPWLKM

Weighing Beam with resolution 0.5 kg to 1000 kg and 1 kg to 2000 kg / accuracy: 0.1% max.


- Two weighing ranges for high accuracy
- Accuracy of ±0.1 % of the weighed value
- IP 68 protection type
- 25 mm stainless steel screen

 

Manufacturer: Dini Argeo GmbH
Test Instruments manufacturer
Order no.: PCE-ATP 1-KIT
The PCE-ATP 1-KIT is used to quickly and easily check the cleanliness of surfaces. The PCE-ATP 1 displays a measurement result on the large LC display after only 10 seconds. The PCE-ATP 1 internal memory stores up to 10,000 measured data sets with time and date.

- Measuring width: 0 ... 999,999 RLU
- Fast hygiene tests in just 10 seconds
- USB and Bluetooth printer interface
- Automatic calibration
- For HACCP implementation
- Data storage
- Incl. 100 Test tubes (swabs)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: TXgard-IS+O3

The TXgard-IS+O3 is a single-gas Gas detector used to warn for gases (Ozone, O3, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Ozone, O3, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: TXgard-IS+PH3

The TXgard-IS+PH3 is a single-gas Gas detector used to warn for gases (Phosphine, PH3, 0 ... 2 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Phosphine, PH3, 0 ... 2 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: PCE-ATP 1-KIT
The PCE-ATP 1-KIT is used to quickly and easily check the cleanliness of surfaces. The PCE-ATP 1 displays a measurement result on the large LC display after only 10 seconds. The PCE-ATP 1 internal memory stores up to 10,000 measured data sets with time and date.

- Measuring width: 0 ... 999,999 RLU
- Fast hygiene tests in just 10 seconds
- USB and Bluetooth printer option
- Automatic calibration
- For HACCP implementation
- Data storage
- Incl. 100 Test tubes or swabs
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FB 10TW

The torque wrench tester of the PCE-TWM series can test torque wrenches up to 500 Nm, depending on the sensor. Due to the precise evaluation electronics, the torque wrench tester has a measurement accuracy of 0.5 % of the measurement range. The torque wrench is fixed by means of a 1/4' female square. The torque wrench tester consists of an evaluation unit and an external torque transducer with a cable which makes the measurement setup convenient.


- Measurement range: 10 Nm (1 kgfm)
- Resolution: 0.01 Nm
- Accuracy: ±0.5 % of measurement range
- Units of measurement: Nm, Ncm, kgfm, lbfin, gfm
- Calibration: possible with external F2 weights
- Max. overload: 50 % of measurement range

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FB 2TW

The torque wrench tester of the PCE-TWM series can test torque wrenches up to 500 Nm, depending on the sensor. Due to the precise evaluation electronics, the torque wrench tester has a measurement accuracy of 0.5 % of the measurement range. The torque wrench is fixed by means of a 1/4' female square. The torque wrench tester consists of an evaluation unit and an external torque transducer with a cable which makes the measurement setup convenient.


- Measurement range: 2 Nm (0.2 kgfm)
- Resolution: 0.001 Nm
- Accuracy: ±0.5 % of measurement range
- Units of measurement: Nm, Ncm, kgfm, lbfin, gfm
- Calibration: possible with external F2 weights
- Max. overload: 50 % of measurement range

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FB 5TW

The torque wrench tester of the PCE-TWM series can test torque wrenches up to 500 Nm, depending on the sensor. Due to the precise evaluation electronics, the torque wrench tester has a measurement accuracy of 0.5 % of the measurement range. The torque wrench is fixed by means of a 1/4' female square. The torque wrench tester consists of an evaluation unit and an external torque transducer with a cable which makes the measurement setup convenient.


- Measurement range: 5 Nm (0.5 kgfm)
- Resolution: 0.001 Nm
- Accuracy: ±0.5 % of measurement range
- Units of measurement: Nm, Ncm, kgfm, lbfin, gfm
- Calibration: possible with external F2 weights
- Max. overload: 50 % of measurement range

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 1200-ICA
The Material Surface Roughness Tester PCE-RT 1200-ICA is used to determine surface roughness. The compact roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The material surface roughness tester PCE-RT 1200-ICA is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

  

- Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.005 ... 16.00 μm / 0.197µinch... 629.921 µinch measurement range
- Rz, Rt: 0.002 ... 200.0 μm / 0.079µinch... 7874.016 µinch measurement range
Induction method with Diamond sensor
- Accuracy < ± 10% and Repeatability < 6%
- Saves up to 20 Data points
- Micro-USB interface
- Built-in rechargeable li-ion battery
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 1200-ICA
The Profilometer - Roughness Tester PCE-RT 1200-ICA is used to determine surface roughness. The compact roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The profilometer PCE-RT 1200-ICA is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

  

- Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.005 ... 16.00 μm / 0.197µinch... 629.921 µinch measurement range
- Rz, Rt: 0.002 ... 200.0 μm / 0.079µinch... 7874.016 µinch measurement range
Induction method with Diamond sensor
- Accuracy < ± 10% and Repeatability < 6%
- Saves up to 20 Data points
- Micro-USB interface
- Built-in rechargeable li-ion battery
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 1200-ICA

 

The Roughness Tester PCE-RT 1200-ICA is used to determine surface roughness. The compact roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The roughness tester PCE-RT 1200-ICA is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

  

- Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.005 ... 16.00 μm / 0.197µinch... 629.921 µinch measurement range
- Rz, Rt: 0.002 ... 200.0 μm / 0.079µinch... 7874.016 µinch measurement range
Induction method with Diamond sensor
- Accuracy < ± 10% and Repeatability < 6%
- Saves up to 20 Data points
- Micro-USB interface
- Built-in rechargeable li-ion battery
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 1200-ICA
The Surface Testing - Roughness Tester PCE-RT 1200-ICA is used to determine surface roughness. The compact roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The surface testing - roughness tester PCE-RT 1200-ICA is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

  

- Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.005 ... 16.00 μm / 0.197µinch... 629.921 µinch measurement range
- Rz, Rt: 0.002 ... 200.0 μm / 0.079µinch... 7874.016 µinch measurement range
Induction method with Diamond sensor
- Accuracy < ± 10% and Repeatability < 6%
- Saves up to 20 Data points
- Micro-USB interface
- Built-in rechargeable li-ion battery
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: 835

The 835 Series Force Gauge is intended for measuring static pressure and tensile forces. It is a robust, mechanical gauge which is suited for applications where it is sufficient to determine temporary forces using simple measuring techniques with good accuracy.


- Measurement range: 0 ... 10 kN (depending on model)
- Accuracy: ±2 % related to the end value
- Internal Sensor
- Precision dial gauge

Manufacturer: Erichsen GmbH & Co. KG
Test Instruments manufacturer
Order no.: 833

A Series 833 Force Gauge is ideal for permanent use on machinery, systems and equipment. Our hydraulic force gauge is based on the principle that a hydraulically transmitted force acts on the load cell, which then transmits the measured value directly to the dial gauge.


- Nominal load: up to 400 kN (depending on the model)
- Measurement uncertainty: ≤ ± 1.5 %
- Temperature range: 0 ... 50 °C / 32 ... 122 °F


Please make your selection in the technical data or in the shopping cart.

Manufacturer: Erichsen GmbH & Co. KG
Test Instruments manufacturer
Order no.: PCE-SD 3000U
The floor scale is a verifiable, calibrated U-shaped pallet scale intended for mobile use. The dimensions of the calibrated floor scale are the standard EU size (1200 x 800 mm).

- Weighing range: 0 ... 3000 kg
- Readability: 1 kg
- Calibration value: 1 kg
- Verifiable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 3000U
The heavy duty scale is a verifiable, calibrated U-shaped pallet scale intended for mobile use. The dimensions of the calibrated heavy duty scale are the standard EU size (1200 x 800 mm).

- Weighing range: 0 ... 3000 kg
- Readability: 1 kg
- Calibration value: 1 kg
- Verifiable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 3000U
The industrial scales are verifiable, calibrated U-shaped pallet scale intended for mobile use. The dimensions of the calibrated industrial scales are the standard EU size (1200 x 800 mm).

- Weighing range: 0 ... 3000 kg
- Readability: 1 kg
- Calibration value: 1 kg
- Verifiable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 3000U
The pallet scales are calibratable, and also initially calibrated, designed for mobile applications and having a U-shaped design. The size and measurements of the calibrated pallet scales PCE-SD U series are accordant to European standard pallet scales (1200 x 800 mm). The U-shape of the calibrated pallet scales allows easy positioning of EU standard pallets on the scales, preferably with a forklift.

- Weighing range: 0 ... 3000 kg
- Readability: 1 kg
- Calibration value: 1 kg
- Verifiable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 3000U
The weighbridge is a verifiable, calibrated U-shaped pallet scale intended for mobile use. The dimensions of the calibrated weighbridge are the standard EU size (1200 x 800 mm).

- Weighing range: 0 ... 3000 kg
- Readability: 1 kg
- Calibration value: 1 kg
- Verifiable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer