Surface Testing - Gloss Meter PCE-SGM 60
£ 1,143.00
Price excl. VAT &. delivery

The PCE-SGM 60 surface tester and gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


  • Measurement geometry: 60° degree angle
  • Measurement up to 1000 gloss units
  • Internal reading memory up to 5000 readings
  • 3.5" TFT display
  • Light source: D65
  • Wave length: 400-700 nm

Condition Monitoring Thickness Meter PCE-TG 300-P5EE
£ 1,141.00
Price excl. VAT &. delivery
Wireless

The PCE-TG 300-P5EE is a condition monitoring thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the condition monitoring thickness meter. Wall thicknesses under a coating can also be measured with the condition monitoring thickness meter.

  • Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
  • Diameter: 10mm / 0.39"
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5MHz
  • Bluetooth

 

IoT Meter PCE-TG 300-P5EE
£ 1,141.00
Price excl. VAT &. delivery
Wireless

The PCE-TG 300-P5EE is an IoT meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the IoT meter. Wall thicknesses under a coating can also be measured with the IoT meter.

  • Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
  • Diameter: 10mm / 0.39"
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5MHz
  • Bluetooth

Material Tester PCE-TG 300-P5EE
£ 1,141.00
Price excl. VAT &. delivery
Wireless

The PCE-TG 300-P5EE is a material tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material tester. Wall thicknesses under a coating can also be measured with the material tester.

  • Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
  • Diameter: 10mm / 0.39"
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5MHz
  • Bluetooth

Material Thickness Meter PCE-TG 300-P5EE
£ 1,141.00
Price excl. VAT &. delivery
Wireless

The PCE-TG 300-P5EE is a material thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material thickness meter. Wall thicknesses under a coating can also be measured with the material thickness meter.

  • Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
  • Diameter: 10mm / 0.39"
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5MHz
  • Bluetooth

NDT Test Instrument PCE-TG 300-P5EE
£ 1,141.00
Price excl. VAT &. delivery
Wireless

The PCE-TG 300-P5EE is an NDT test instrument for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the NDT test instrument. Wall thicknesses under a coating can also be measured with the NDT test instrument.

  • Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
  • Diameter: 10mm / 0.39"
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5MHz
  • Bluetooth

Paint Thickness Tester PCE-TG 300-P5EE
£ 1,141.00
Price excl. VAT &. delivery
Wireless

The PCE-TG 300-P5EE is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

  • Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
  • Diameter: 10mm / 0.39"
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5MHz
  • Bluetooth

Thickness Gauge PCE-TG 300-P5EE
£ 1,141.00
Price excl. VAT &. delivery
Wireless

The PCE-TG 300-P5EE is a thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness gauge. Wall thicknesses under a coating can also be measured with the thickness gauge.

  • Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
  • Diameter: 10mm / 0.39"
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5MHz
  • Bluetooth

Thickness Meter PCE-TG 300-P5EE
£ 1,141.00
Price excl. VAT &. delivery
Wireless

The PCE-TG 300-P5EE is a thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the thickness meter.

  • Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
  • Diameter: 10mm / 0.39"
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5MHz
  • Bluetooth