Order no.: PCE-TDS 100H

PCE-TDS 100H is a portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 57 … 720 mm / approx. 2 ... 28 in.  Software sold separately - see accessories for details.

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TDS 100H

PCE-TDS 100H is a portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 57 … 720 mm / approx. 2 ... 28 in.  Software sold separately - see accessories for details.

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TDS 100H

PCE-TDS 100H is a portable handheld clamp-on ultrasonic flow test instrument or meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 57 … 720 mm / approx. 2 ... 28 in.  Software sold separately - see accessories for details.

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TDS 100H

PCE-TDS 100H is a portable handheld clamp-on ultrasonic flow tester or meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 57 … 720 mm / approx. 2 ... 28 in.  Software sold separately - see accessories for details.

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 300B

The floor scale PCE-SD..B is a verifiable weighing balance that is intended for flexible use. Due to the flexibly movable weighing beam (4 m), the floor scale is well suited for weighing large objects, and non-standard pallet sizes can also be weighed quickly and conveniently.

 

- Weighing range : 300 kg
- Readability: 0.1 kg
- Calibration value: 0.1 kg
- Verifiable M III

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 600B

The floor scale PCE-SD..B is a verifiable weighing balance that is intended for flexible use. Due to the flexibly movable weighing beam (4 m), the floor scale is well suited for weighing large objects, and non-standard pallet sizes can also be weighed quickly and conveniently.

 

- Weighing range : 600 kg
- Readability: 0.2 kg
- Calibration value: 0.2 kg
- Verifiable M III

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 300B

The Pallet Beams PCE-SD..B are a verifiable weighing balance that is intended for flexible use. Due to the flexibly movable pallet beams (4 m), the floor scale is well suited for weighing large objects, and non-standard pallet sizes can also be weighed quickly and conveniently.

 

- Weighing range : 300 kg
- Readability: 0.1 kg
- Calibration value: 0.1 kg
- Verifiable M III

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 600B

The Pallet Beams PCE-SD..B are a verifiable weighing balance that is intended for flexible use. Due to the flexibly movable pallet beam (4 m), the pallet beams are well suited for weighing large objects, and non-standard pallet sizes can also be weighed quickly and conveniently.

 

- Weighing range : 600 kg
- Readability: 0.2 kg
- Calibration value: 0.2 kg
- Verifiable M III

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: Tcgard-CH4

Single-Gas Gas Leak Detector warning for gases (for Methane CH4), / without display / with signal output for sensors in combination with a stationary equipment to detect gases (with ATEX approval).


- Stationary
- For Methane CH4
- Additional display and alarm station
- ATEX approved

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: TCgard-CO2

Single-Gas Gas Leak Detector warning for gases (for Carbon Dioxide CO2), / without display / with signal output for sensors in combination with a stationary equipment to detect gases (with ATEX approval).


- Stationary
- For Carbon Dioxide CO2
- Additional display and alarm station
- ATEX approved

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: TCgard-CH4

Single-Gas Gas Detector warning for gases (for Methane CH4), / without display / with signal output for sensors in combination with a stationary equipment to detect gases (with ATEX approval).


- Stationary
- For Methane CH4
- Additional display and alarm station
- ATEX approved

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: TCgard-CO2

Single-Gas Gas Detector warning for gases (for Carbon Dioxide CO2), / without display / with signal output for sensors in combination with a stationary equipment to detect gases (with ATEX approval).


- Stationary
- For Carbon Dioxide CO2
- Additional display and alarm station
- ATEX approved

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: PCE-WSAC 50W 230-ICA

The anemometer PCE-WSAC 50W 230-ICA is useful for measuring the wind speed to help determine the preferred site for a wind turbine installation. The device also monitors the wind load on existing wind farms, as well as on cranes for safey purposes. Due to the integrated 4 ... 20-mA analogue output of the anemometer, the measured data can also be transferred to other controllers for evaluation.


- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 390N

PCE-VE 390N is the ideal downhole inspection camera for the evaluation of homes and buildings (walls, supports, eaves, gutters, attics, crawl spaces), plumbing (pipes, drains, sewers, wells) and heating, ventilation, air conditioning and refrigeration (HVACR) systems (ducts, furnaces, chimneys, boiler and condenser tubes). The IP68-rated cable of this chimney and drain camera is waterproof and heavy duty, making the PCE-VE 390N well suited for use in harsh environments like construction sites, manholes and industrial waste pipes.


- Camera head diameter: 28 mm / 1.1"
- Camera cable length: 10 m / 32 ft 9"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)
- Especially suitable for chimneys, downpipes, ventilation ducts etc.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 100

PCE-CT 100 is a coating thickness measuring instrument used to quickly and easily determine coating thicknesses on ferrous (Fe) and non-ferrous (nFe) metals. This compact handheld coating thickness gauge uses magnetic induction (ISO 2178) and eddy current (ISO 2360) coating thickness measurement methods to take non-destructive measurements of coating and dry film thickness (DFT) on metal substrates such as steel and aluminum.


- Measuring range: Depends on choice of sensor probe - sold separately
- Resolution: 0.1 μm or < 0.2% of measured value
- Saves up to 100,000 measurements to memory
- Interfaces: USB 2.0, Bluetooth 4.0
- Displays measuring units in μm, mm or mils
- Includes factory calibration certificate according to ISO 9001

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 100

PCE-CT 100 is a dry film thickness measuring instrument used to quickly and easily determine coating thicknesses on ferrous (Fe) and non-ferrous (nFe) metals. This compact handheld coating thickness gauge uses magnetic induction (ISO 2178) and eddy current (ISO 2360) coating thickness measurement methods to take non-destructive measurements of coating and dry film thickness (DFT) on metal substrates such as steel and aluminum.


- Measuring range: Depends on choice of sensor probe - sold separately
- Resolution: 0.1 μm or < 0.2% of measured value
- Saves up to 100,000 measurements to memory
- Interfaces: USB 2.0, Bluetooth 4.0
- Displays measuring units in μm, mm or mils
- Includes factory calibration certificate according to ISO 9001

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 390N

PCE-VE 390N is the ideal industrial borescope or snake inspection camera for the analysis of buildings (walls, supports, eaves, gutters, attics, crawl spaces), plumbing (pipes, drains, sewers, wells) and heating, ventilation, air conditioning and refrigeration (HVACR) systems (ducts, furnaces, chimneys, boiler and condenser tubes). The IP68-rated cable of this inspection camera is waterproof and heavy duty, making the PCE-VE 390N well suited for use in tough environments like construction sites and industrial installations.


- Camera head diameter: 28 mm / 1.1"
- Camera cable length: 10 m / 32 ft 9"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)
- Especially suitable for chimneys, downpipes, ventilation ducts etc.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 100

PCE-CT 100 is a material coating thickness measuring instrument used to quickly and easily determine coating thicknesses on ferrous (Fe) and non-ferrous (nFe) metals. This compact handheld coating thickness gauge uses magnetic induction (ISO 2178) and eddy current (ISO 2360) coating thickness measurement methods to take non-destructive measurements of coating and dry film thickness (DFT) on metal substrates such as steel and aluminum.


- Measuring range: Depends on choice of sensor probe - sold separately
- Resolution: 0.1 μm or < 0.2% of measured value
- Saves up to 100,000 measurements to memory
- Interfaces: USB 2.0, Bluetooth 4.0
- Displays measuring units in μm, mm or mils
- Includes factory calibration certificate according to ISO 9001

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 100

PCE-CT 100 is a paint and coating thickness measuring instrument used to quickly and easily determine coating thicknesses on ferrous (Fe) and non-ferrous (nFe) metals. This compact handheld coating thickness gauge uses magnetic induction (ISO 2178) and eddy current (ISO 2360) coating thickness measurement methods to take non-destructive measurements of coating and dry film thickness (DFT) on metal substrates such as steel and aluminum.


- Measuring range: Depends on choice of sensor probe - sold separately
- Resolution: 0.1 μm or < 0.2% of measured value
- Saves up to 100,000 measurements to memory
- Interfaces: USB 2.0, Bluetooth 4.0
- Displays measuring units in μm, mm or mils
- Includes factory calibration certificate according to ISO 9001

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 390N

PCE-VE 390N is the ideal snake camera for the analysis of buildings (walls, supports, eaves, gutters, attics, crawl spaces), plumbing (pipes, drains, sewers, wells) and heating, ventilation, air conditioning and refrigeration (HVACR) systems (ducts, furnaces, chimneys, boiler and condenser tubes).


- Camera head diameter: 28 mm / 1.1"
- Camera cable length: 10 m / 32 ft 9"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)
- Especially suitable for chimneys, downpipes, ventilation ducts etc.

Manufacturer: PCE Instruments
Test Instruments manufacturer