Order no.: PCE-CSM 21
PCE-CSM 21 is a handheld spectrophotometer used for high-quality color measurement. Featuring a custom 4 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the PCE-CSM 21 offers a long battery life, a 9-color lamp and an easy-to-use portable design. The PCE-CSM 21 covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

- Measuring geometry: 8° / d
- Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
- Bluetooth 4.0 and USB cable for data transfer
- 2000 reference standard memory, 20,000 sample memory
- Light sources: D65, A, C, D50, D55, D75, F2, F7, F11
- Color ranges: CIE Lab, XYZ, Yxy, LCh, CIE LUV, Hunter LAB
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 210

For industrial continuous production of wood pellets, chips, sawdust and similar materials when in-line moisture measurement for monitoring and controlling the mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 210 moisture sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.


- Measuring range: 0 ... 100%
- The maximum permissible error (absolute): Lab analysis of your sample determines % error
- Temperature range: +5 ... +80 °C  (+41 ... +176 °F)
- Questionnaire starts evaluation process  

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 210

For industrial continuous production of concrete, powders, wood, and other small aggregates when in-line moisture measurement for monitoring and controlling the drying and mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 210 moisture test sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.


- Measuring range: 0 ... 100%
- The maximum permissible error (absolute): Lab analysis of your sample determines % error
- Temperature range: +5 ... +80 °C  (+41 ... +176 °F)
- Questionnaire starts evaluation process

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TU 3

PCE-TU 3 is a condition monitoring laser shaft alignment tool designed to aid in aligning rotating equipment (e.g., electric motor and direct-coupled machine) shafts to prevent premature failure of couplings, bearings and mechanical seals. PCE-TU 3 also helps you detect and correct soft foot to avoid costly downtime.


- Max. 10 m / 32.8 ft distance between sensors
- Accuracy: ± 1 % + 0.001
- Resolution: 0.001 mm / 0.1°

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-COM 20

PCE-COM 20 is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 6000F SST
The stainless steel floor scale is installed in the floor to obtain a flat surface. This allows the stainless steel floor scale to be easily loaded with all kinds of conveyors.

- Weighing range : 6000 kg
- Readability : 2 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-COM 20

PCE-COM 20 is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in 
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 210

For industrial continuous production of wood pellets, chips, sawdust and similar materials when in-line moisture measurement for monitoring and controlling the drying and mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 210 moisture test sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.


- Measuring range: 0 ... 100%
- The maximum permissible error (absolute): Lab analysis of your sample determines % error
- Temperature range: +5 ... +80 °C  (+41 ... +176 °F)
- Questionnaire starts evaluation process

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 210

For industrial continuous production of wood pellets, chips, sawdust and similar materials when in-line moisture measurement for monitoring and controlling the drying and mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 210 moisture test sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.


- Measuring range: 0 ... 100%
- The maximum permissible error (absolute): Lab analysis of your sample determines % error
- Temperature range: +5 ... +80 °C  (+41 ... +176 °F)
- Questionnaire starts evaluation process

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-COM 20

PCE-COM 20 is a portable handheld non-destructive surface testing - conductivity meter for metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TU 3

PCE-TU 3 is a vibration analyzer laser shaft alignment tool designed to aid in aligning rotating equipment (e.g., electric motor and direct-coupled machine) shafts to prevent premature failure of couplings, bearings and mechanical seals. PCE-TU 3 also helps you detect and correct soft foot to avoid costly downtime.


- Max. 10 m / 32.8 ft distance between sensors
- Accuracy: ± 1 % + 0.001
- Resolution: 0.001 mm / 0.1°

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TU 3

PCE-TU 3 is a vibration meter laser shaft alignment tool designed to aid in aligning rotating equipment (e.g., electric motor and direct-coupled machine) shafts to prevent premature failure of couplings, bearings and mechanical seals. PCE-TU 3 also helps you detect and correct soft foot to avoid costly downtime.


- Max. 10 m / 32.8 ft distance between sensors
- Accuracy: ± 1 % + 0.001
- Resolution: 0.001 mm / 0.1°

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TU 3

The PCE-TU 3 Vibration Test Instrument is designed to check the shafts in machines and facilities and for the optical alignment of the shafts. This reduces machine downtime and prevents premature bearing failure. By means of the PCE-TU 3 Vibration Meter the relative position between two coupled machines, such as an engine and a pump, can be alternated to the point that the axis line of the shafts align during common operation. These test instruments are calibrated by the manufacturer. An ISO calibration certificate is an option.

- Accurate shaft alignment
- Max. 10 m distance between sensors
- Resolution 0.001 mm
- Measurement via Soft Foot possible
- 2 GB internal data memory

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 210

For industrial continuous production of wood pellets, chips, sawdust and similar materials when in-line moisture measurement for monitoring and controlling the drying and mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 210 moisture sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.


- Measuring range: 0 ... 100%
- The maximum permissible error (absolute): Lab analysis of your sample determines % error
- Temperature range: +5 ... +80 °C  (+41 ... +176 °F)
- Questionnaire starts evaluation process

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 210

For industrial continuous production of wood pellets, chips, sawdust and similar materials when in-line moisture measurement for monitoring and controlling the drying and mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 210 moisture test sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.


- Measuring range: 0 ... 100%
- The maximum permissible error (absolute): Lab analysis of your sample determines % error
- Temperature range: +5 ... +80 °C  (+41 ... +176 °F)
- Questionnaire starts evaluation process

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 20
PCE-CSM 20 is a handheld spectrophotometer / colorimeter used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the PCE-CSM 20 offers a long battery life, 4-color lamp and an easy-to-use portable design. The PCE-CSM 20 covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

- Measuring geometry: 8° / d
- Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
- USB cable for data transfer
- 2000 reference standard memory, 20,000 sample memory
- Light source: D65, A, C, D50
- Color ranges: CIE Lab, XYZ, Yxy, LCh, CIE LUV, Hunter LAB
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 20
PCE-CSM 20 is a handheld colorimeter used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the PCE-CSM 20 offers a long battery life, a 4-color lamp and an easy-to-use portable design. The PCE-CSM 20 covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

- Measuring geometry: 8° / d
- Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
- USB cable and software for data transfer
- 2,000 reference standard memory, 20,000 sample memory
- Light source: D65, A, C, D50
- Color ranges: CIE L*a*b, XYZ, Yxy, LCh, CIE LUV, Hunter L*A*B 
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 3000F SST
The stainless steel floor scale is installed in the floor to obtain a flat surface. This allows the stainless steel floor scale to be easily loaded with all kinds of conveyors.

- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 20
PCE-CSM 20 is a handheld spectrophotometer used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the PCE-CSM 20 offers a long battery life, a 4-color lamp with long life and an easy-to-use portable design. The PCE-CSM 20 covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

- Measuring geometry: 8° / d
- Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
- USB cable and software for data transfer
- 2000 reference standard memory, 20,000 sample memory
- Light source: D65, A, C, D50
- Color ranges: CIE L*a*b, XYZ, Yxy, LCh, CIE LUV, Hunter L*A*B 
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PQC 34EU
The particle counter PCE-PQC 34EU is the most advanced particle counter on the market. This particle counter PCE-PQC 34EU stores up to 45,000 measured values ​​with time stamp.

- Measuring range: 0.3 ... 25 μm
- Measurement channel sizes: 0.3, 0.5, 1.0, 2.5, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.3 μm, 100% at > 0.45 μm according to JIS
- Interface: Ethernet, USB
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921
Manufacturer: PCE Instruments
Test Instruments manufacturer