The Portable Metal Hardness Tester PCE-2600N is used wherever a fast hardness test has to be carried out. It is possible to use the hardness tester PCE-2600N to determine the surface hardness of many metals. The hardness tester PCE-2600N is especially suitable for quality or product inspection.

• Measurement according to Leeb Rebound method
• Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
• Accuracy: ± 0.5%, Repeatability: ± 0.8%
• Impactor: DL
• Display: 128 x 64 OLED

The durometer is an analog measuring device to determine concrete strength. The measuring method of the concrete durometer is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the durometer. The resulting rebound enables the durometer to determine the strength of the concrete.

• Nominal kinetic energy: 4.5 J
• For high-strength concrete
• Simple and quick operation
• For determining concrete hardness
• Schmidt principle

The handheld portable digital colorimeter PCE-CSM 1 was developed for quality control and offers a high accuracy. When using the colorimeter, you can choose between different color spaces (CIE L*a*b*C*h, CIE L*a*b* and CIE XYZ). After a measurement with the colorimeter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the 100 reference value easily. A 6 mm aperture is used for sample scanning.

• CIE L*a*b*C*h, L*a*b* and XYZ
• Automatic white and black calibration
• 8°/d geometry diffused illumination integrating sphere system
• Rechargeable Li-ion battery

The handheld portable digital Spectrophotometer PCE-CSM 1 was developed for quality control and offers a high accuracy. When using the Spectrophotometer, you can choose between different color spaces (CIE L*a*b*C*h, CIE L*a*b* and CIE XYZ). After a measurement with the Spectrophotometer, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the 100 reference value easily. A 6 mm aperture is used for sample scanning.

• CIE L*a*b*C*h, L*a*b* and XYZ
• Automatic white and black calibration
• 8°/d geometry diffused illumination integrating sphere system
• Rechargeable Li-ion battery

PCE-SW 5000N is a portable battery-powered industrial weighbridge or pallet scale featuring two heavy-duty parallel weighing beams made of lacquered steel that can be positioned up to 4 m / 13 ft apart. Thus, the adjustable width accommodates multiple pallet, box and container sizes. In addition, the weighbridge's stainless-steel-encased display can be placed up to 4 m / 13 ft away from the weighing beams, allowing for wall mounting.

• Weighing capacity: 5000 kg / 11023 lb (=5.5 T)
• Weighing units: kilograms (kg) or pounds (lbs)
• Resolution: 2 kg
• Accuracy: ± 8 kg
• Bi-directional RS-232 interface

PCE-VE 390N is the ideal snake videoscope or inspection camera for the analysis of buildings (walls, supports, eaves, gutters, attics, crawl spaces), plumbing (pipes, drains, sewers, wells) and heating, ventilation, air conditioning and refrigeration (HVACR) systems (ducts, furnaces, chimneys, boiler and condenser tubes). The IP68-rated cable of this inspection camera is waterproof and heavy duty, making the PCE-VE 390N well suited for use in tough environments such as construction sites and industrial installations.

• Camera head diameter: 28 mm / 1.1"
• Camera cable length: 10 m / 32 ft 9"
• Interface: Mini-USB 1.1 and AV out
• Memory: 8 GB SD memory card (incl.)
• Especially suitable for chimneys, downpipes, ventilation ducts etc.

The accelerometer is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the accelerometer, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

• Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Data logger: 50 memory locations with 43200 measured values each
• FFT analysis
• Route measurement
• Rechargeable battery
• Color graphic display
• incl. headset

The weighbridge is a verifiable weighing balance that is intended for flexible use. Due to the flexibly movable weighing beam (4 m), the weighbridge is well suited for weighing large objects, and non-standard pallet sizes can also be weighed quickly and conveniently.

• Weighing range : 3000 kg
• Readability: 1 kg
• Calibration value: 1 kg
• Verifiable M III

PCE-VE 360N is a small-diameter videoscope, video borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial videoscope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 3 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.

• 1 m / 3ft 3" camera cable with front camera
• 1 m / 3ft 3" camera cable with 90° side camera
• Diameter camera head: Ø 3.9 mm / 0.15"
• Interface: Mini-USB 1.1 and AV out/in
• Memory: 8 GB SD memory card (incl.)
• Cable length: 1 m / 3ft 3"

The PCE-DDM 5 Weighing Hook is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 5 Weighing Hook is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

• Measurement range: 5,000 kg / 50 kN / 11,023 lbs
• Resolution: 2 kg / 20 N
• Units of measurement: kg / t / lbs / N / kN
• Supplied with remote control indicator