The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.
Measuring range:±32 m/s
Resolution: 0.001 m/s
Pipe size: DN 300 … 6000 mm
Sensor dimensions: 91 x 52 x 44 mm
for different media
for different pipe materials
measuring parameters: flow velocity, flow rate and volume
The Clamp-on Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Clamp-on Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.
The Portable Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Portable Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.
Measuring range: ±32 m/s
Resolution: 0.001 m/s
Sensor for pipe diameter DN 300 … 6000 mm
Sensor dimensions: 91 x 52 x 44 mm
for different media
for different pipe materials
measuring parameters: flow velocity, flow rate and volume
Interface: USB
Data logger: 32 GB memory capacity (10 million measuring points)
The Clamp-on Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Clamp-on Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.
Measuring range: ±32 m/s
Resolution: 0.001 m/s
Sensor for pipe diameter DN 300 … 6000 mm
Sensor dimensions: 91 x 52 x 44 mm
for different media
for different pipe materials
measuring parameters: flow velocity, flow rate and volume
Interface: USB
Data logger: 32 GB memory capacity (10 million measuring points)
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.
Measuring range:±32 m/s
Resolution: 0.001 m/s
Pipe size: DN 300 … 6000 mm
Sensor dimensions: 91 x 52 x 44 mm
for different media
for different pipe materials
measuring parameters: flow velocity, flow rate and volume
Large sensor pair for pipe diameters DN 300 … 6000 mm. This sensor pair is therefore suitable for particularly large pipes. The sensors for the ultrasonic flow meter can be attached with detachable cable ties. Thanks to the built-in magnets, the sensors can be attached to pipes with ferrous metal. The sensors have a dimension of 91 x 52 x 44 mm.
Pipe diameter: DN 300 … 6000 mm / 11.8 x 236"
Dimension: 91 x 52 x 44 mm / 3.5 x 2.0 x 1.7"
Important! If you order the sensor later, we need the PCE-TDS 200 handheld unit, to adjust the sensor to the handheld unit!
The current measuring transducer and millivolt signals offers a wide range of configuration options for converting signals. The output signal can be selected between 4 … 20 mA and 0 … 10 VDC can be selected. The current measuring transducer can be configured to measure load cells in the range 0 … 5 mV to 0 … 80 mV, also with bipolar ranges from ±5 mV to ±80 mV.
The universal measuring transducer and millivolt signals offers a wide range of configuration options for converting signals. The output signal can be selected between 4 … 20 mA and 0 … 10 VDC can be selected. The universal measuring transducer can be configured to measure load cells in the range 0 … 5 mV to 0 … 80 mV, also with bipolar ranges from ±5 mV to ±80 mV.
The voltage measuring transducer and millivolt signals offers a wide range of configuration options for converting signals. The output signal can be selected between 4 … 20 mA and 0 … 10 VDC can be selected. The voltage measuring transducer can be configured to measure load cells in the range 0 … 5 mV to 0 … 80 mV, also with bipolar ranges from ±5 mV to ±80 mV.
The state-of-the-art particle counter dust measuring device enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the particle counter dust measuring device is done by an internal pump.
Real-time measurement from 0.3 μm … 10 μm
Output in particles/28.3L or particles/m³
Visual and audible alarm when threshold value is exceeded
The state-of-the-art air sampler enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the air sampler is done by an internal pump.
Real-time measurement from 0.3 μm … 10 μm
Output in particles/28.3L or particles/m³
Visual and audible alarm when threshold value is exceeded
The state-of-the-art particle counter enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the particle counter is done by an internal pump.
Real-time measurement from 0.3 μm … 10 μm
Output in particles/28.3L or particles/m³
Visual and audible alarm when threshold value is exceeded
The state-of-the-art airborne particle-counting hygiene enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the airborne particle-counting hygiene is done by an internal pump.
Real-time measurement from 0.3 μm … 10 μm
Output in particles/28.3L or particles/m³
Visual and audible alarm when threshold value is exceeded
The state-of-the-art data logger enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the data logger is done by an internal pump.
Real-time measurement from 0.3 μm … 10 μm
Output in particles/28.3L or particles/m³
Visual and audible alarm when threshold value is exceeded
The state-of-the-art dust monitor enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the dust monitor is done by an internal pump.
Real-time measurement from 0.3 μm … 10 μm
Output in particles/28.3L or particles/m³
Visual and audible alarm when threshold value is exceeded