With this NDT test instrument, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the NDT test instrument consists of braided tungsten.

• Diameter: Ø2.2mm / 0.08"
• Cable length: 1m / 3.2 ft
• Camera direction: 90°
• Resolution: 160,000 pixels
• Focusing range: 5 … 50 mm / 0.19 … 1.96"
• 7" touch screen for easy operation
• replaceable battery with status display
• Storage of recording on SD card
• Motor with endoscope cable can be changed quickly
• HDMI connection for direct image transmission

With this NDT test instrument, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the NDT test instrument consists of braided tungsten.

• Endoscope cable length: approx. 2 m / 6.5 ft
• Diameter: 3.8mm / 0.15"
• Camera resolution 160,000 pixels each
• Viewing angle front camera 120°, side camera 90°
• Focusing distance 5 … 50 mm / 0.19 … 1.96" each
• Camera head length: 42 mm / 1.6"
• Bending radius at 90° 35 mm / 1.3"
• Live images from both cameras side by side
• 7" touch screen for easy operation
• Replaceable battery with status display
• Storage of recording on SD card
• Motor with endoscope cable can be changed quickly
• HDMI connection for direct image transmission

With this NDT test instrument, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the NDT test instrument consists of braided tungsten.

• Diameter: Ø2.8mm / 0.11"
• Cable length: 2m / 6.5 ft
• Camera direction: 0°
• Resolution: 160,000 pixels
• Focusing range: 5 … 50 mm / 0.19 … 1.96"
• 7" touch screen for easy operation
• Replaceable battery with status display
• Storage of recording on SD card
• Motor with endoscope cable can be changed quickly
• HDMI connection for direct image transmission

With this NDT test instrument, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the NDT test instrument consists of braided tungsten.

• Diameter: Ø6mm / 0.23"
• Cable length: 5m / 16.4 ft
• Camera direction: 0°
• Resolution: 1MP
• Focusing range: 5 … 50 mm / 0.19 … 1.96"
• 7" touch screen for easy operation
• replaceable battery with status display
• Storage of recording on SD card
• Motor with endoscope cable can be changed quickly
• HDMI connection for direct image transmission

With this NDT test instrument, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the NDT test instrument consists of braided tungsten.

• Endoscope cable length: approx. 2 m / 6.5 ft
• Diameter: 3.8mm / 0.15"
• Front camera with resolution: 1,000,000 pixels
• Front camera viewing angle 120°
• Focus 10 … 100 mm / 0.39 … 3.9"
• Movable camera head 46 mm / 1.8" long
• Bending radius approx. 35 mm / 1.3" at 90°
• 7" touch screen for easy operation
• replaceable battery with status display
• Storage of recording on SD card
• Motor with endoscope cable can be changed quickly
• HDMI connection for direct image transmission

With this NDT test instrument, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the NDT test instrument consists of braided tungsten.

• Borescope camera cable length: 2 m / 6.5 ft
• Cable diameter: 6mm / 0.23"
• Direction of view of the camera frontal
• Camera resolution 1 million pixels
• Camera viewing angle 120°
• Focusing distance 10 … 100 mm / 0.39 … 3.9"
• Flexible camera head length 60 mm / 2.3"
• Radius at 90° bend 50 mm / 1.9"
• 7" touch screen for easy operation
• replaceable battery with status display
• Storage of recording on SD card
• Motor with endoscope cable can be changed quickly
• HDMI connection for direct image transmission

PCE-5000 is a portable hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in Non-destructive testing produces microscopic indentation.

• Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
• Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
• Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
• Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
• Memory size: 1,000 groups for measurement data and 20 groups for calibration data
• Different probe types (also automatic motorized probes) available

The Spectrophotometer PCE-CSM 5 was developed for quality control and offers a high accuracy. When using the Spectrophotometer, you can choose between different color spaces (CIE LAB, XYZ, LCh, RGB, LUV). In addition, the Spectrophotometer PCE-CSM 5 comes with two different measuring apertures (Ø4 mm and Ø8 mm). After a measurement with the Spectrophotometer, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily.

• CIE LAB, XYZ, LCh, RGB, LUV
• White calibration
• Storage of 100 reference values and 20,000 samples
• Light sources D65, A, C, D50, F2, F6, F8, F10, F11 and F12
• Exchangeable measuring apertures
• Illumination/Viewing Angles 8°/d and CIE 10°

The colorimeter PCE-CSM 5 was developed for quality control and offers a high accuracy. When using the colorimeter, you can choose between different color spaces (CIE LAB, XYZ, LCh, RGB, LUV). In addition, the colorimeter PCE-CSM 5 comes with two different measuring apertures (Ø4 mm and Ø8 mm). After a measurement with the colorimeter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily.

• CIE LAB, XYZ, LCh, RGB, LUV
• White calibration
• Storage of 100 reference values and 20,000 samples
• Light sources D65, A, C, D50, F2, F6, F8, F10, F11 and F12
• Exchangeable measuring apertures
• Illumination/Viewing Angles 8°/d and CIE 10°