Moisture Analyser / Moisture Analyzer PCE-WAM 60-KIT
£ 8,322.00
Price excl. VAT &. delivery
ISO Calibration
The Moisture Analyser / Moisture Analyzer enables the simultaneous or separate measurement of water activity on 4 channels. It measures water activity within a range from 0 ... 1 aw and temperature from -10 ... +50 °C. Our meter is equipped with a 7" touchscreen that displays the data in real time and saves it for later analysis. Results, graphs and measurement data can be called up at any time in the Moisture Analyser / Moisture Analyzer.

  • water activity: 0 ... 1 aw
  • resolution: 0.0001 aw
  • accuracy: ±0.01 aw (10 ... 30 °C)
  • temperature: -10 ... +50 °C
  • external measuring cell
  • up to 4 aw sensors simultaneously
  • integrated printer
  • memory: 65535 data records per channel
  • real-time display of the measurement curve
  • 7" LC touch display
  • incl. software
  • incl. 4 sensors
Grain Moisture Analyzer PCE-A-315
£ 6,444.00
Price excl. VAT &. delivery

The PCE-A-315 inline moisture sensor provides exceptionally accurate grain moisture measurement in real time. The PCE-A-315 in-process moisture meter uses low-power microwaves to penetrate the surface every 0.2 second and obtain interior moisture readings without causing any damage. An integrated temperature probe ensures the readings are accurate from 5°C to 55°C / 41°F to 131°F. Suitable for the continuous monitoring of moisture in corn, soybeans, wheat, rice, sorghum, barley, oats, rye, hops, green coffee, cocoa beans, oil seeds, flax seeds, sunflower seeds, poppy seeds, pumpkin seeds, spelt seeds, buckwheat, sesame, peas, fava beans, scarlet runner beans, triticale, amaranth and jatropha.


  • Boasts a measurement range of 5% to 40% for moisture content during  continuous mass flow with an error of just ±0.5% from 5% to 18% grain  moisture
  • Lowers energy costs by enabling shorter drying times and reduces labor costs  by automating the moisture monitoring process
  • Provides nearly maintenance-free operation, delivering consistently accurate  moisture readings over time
  • Analog output of 4 to 20 mA can be converted to digital for dryer control

Moisture Analyser / Moisture Analyzer PCE-WAM 60
£ 5,038.00
Price excl. VAT &. delivery
The Moisture Analyser / Moisture Analyzer enables the simultaneous or separate measurement of water activity on 4 channels. It measures water activity within a range from 0 ... 1 aw and temperature from -10 ... +50 °C. Our meter is equipped with a 7" touchscreen that displays the data in real time and saves it for later analysis. Results, graphs and measurement data can be called up at any time in the Moisture Analyser / Moisture Analyzer.

  • water activity: 0 ... 1 aw
  • resolution: 0.0001 aw
  • accuracy: ±0.01 aw (10 ... 30 °C)
  • temperature: -10 ... +50 °C
  • external measuring cell
  • up to 4 aw sensors simultaneously
  • integrated printer
  • memory: 65535 data records per channel
  • real-time display of the measurement curve
  • 7" LC touch display
  • incl. software
Pellet Moisture Analyzer PCE-PEL 20
£ 732.00
Price excl. VAT &. delivery

PCE-PEL 20 is a portable handheld digital moisture analyzer used to measure the moisture or water content of pellets and biomass such as sawdust, wood chips, straw, hay, sunflower shells, buckwheat, corn and soy. Designed in collaboration with biomass power plant operators, this pellet moisture analyzer features automatic temperature compensation.


  • 1000 mm / 39.37" long acid-proof steel measuring probe
  • Moisture content measuring range: 10 … 20 %
  • Temperature compensation range: 0 … +50 °C (32 … 122 °F)
  • Resolution: 0.1 % moisture content
  • Response time: Approx. 3 seconds

Moisture Analyser / Moisture Analyzer PCE-UX 3081
£ 4,402.00
Price excl. VAT &. delivery
Our Moisture Analyser / Moisture Analyzer was specially developed for light and bulky materials. Good Laboratory Practice maximum weighing capacity of 400 g, a sample volume of 360 cm³ and a high measuring resolution of 0.001 g, it guarantees precise and reliable moisture measurements. The Moisture Analyser / Moisture Analyzer is ideal for applications in the wood, agricultural and plastics industries, e.g. for shavings, animal feed or granulates. It delivers precise results even at very low moisture contents.

  • weighing range: 0 ...400 g
  • resolution: 0.001 g
  • absolute moisture: 0 ... 100 %
  • resolution: 0.01 %
  • heating temperature: 40 ... 220 °C
  • % moisture
  • % dry matter
  • % moisture bd
  • g residual weight / kg
  • residual weight
  • data interface: RS232, USB, V24
  • GLP data management
  • Data Bridge software (optional)
Moisture Analyser / Moisture Analyzer PCE-UX 3081WQ
£ 4,402.00
Price excl. VAT &. delivery
Our Moisture Analyser / Moisture Analyzer was specially developed for light and bulky materials. Good Laboratory Practice maximum weighing capacity of 400 g, a sample volume of 360 cm³ and a high measuring resolution of 0.001 g, it guarantees precise and reliable moisture measurements. The Moisture Analyser / Moisture Analyzer works on the principle of drying with simultaneous weight recording whereas the weight loss is continuously measured and displayed as a percentage of the total mass.

  • weighing range: 0 ...400 g
  • resolution: 0.001 g
  • absolute moisture: 0 ... 100 %
  • resolution: 0.01 %
  • heating temperature: 105 ... 360 °C
  • % moisture
  • % dry matter
  • % moisture bd
  • g residual weight / kg
  • residual weight
  • data interface: RS232, USB, V24
  • GLP data management
  • Data Bridge software (optional)
Moisture Analyser / Moisture Analyzer PCE-UX 3031D
£ 4,241.00
Price excl. VAT &. delivery
Our Moisture Analyser / Moisture Analyzer is a high-precision device that has been specially Good Laboratory Practice plaster analysis. With a maximum weighing capacity of 220 g and a measuring resolution of 0.001 g, it enables precise and reliable moisture measurements. The Moisture Analyser / Moisture Analyzer works on the principle of drying with simultaneous weighing. During drying, the weight loss is continuously recorded and displayed as a percentage of the total mass.

  • weighing range: 0 ... 220 g
  • resolution: 0.001 g
  • absolute moisture: 0 ... 100 %
  • resolution: 0.01 %
  • heating temperature 1: 40 ... 180 °C
  • heating temperature 2: 105 ... 360 °C
  • % moisture
  • % dry matter
  • % moisture bd
  • g residual weight / kg
  • residual weight
  • data interface: RS232, USB, V24
  • GLP data management
  • Data Bridge software (optional)
  • with built-in printer
Moisture Analyser / Moisture Analyzer PCE-UX 3011HQD
£ 3,974.00
Price excl. VAT &. delivery
Our Moisture Analyser / Moisture Analyzer for temperature-insensitive materials up to 600 °C is Good Laboratory Practice various applications in raw material extraction, production, processing, research and recycling. With a maximum initial sample weight of 200 g and a high measuring resolution of 0.001 g, the Moisture Analyser / Moisture Analyzer enables precise moisture measurement.

  • weighing range: 0 ... 200 g
  • resolution: 0.001 g
  • absolute moisture: 0 ... 100 %
  • resolution: 0.01 %
  • heating temperature: 105 ... 600 °C
  • % moisture
  • % dry matter
  • % moisture bd
  • g residual weight / kg
  • residual weight
  • data interface: RS232, USB, V24
  • software Data Bridge (optional)
  • with built-in printer
Moisture Analyser / Moisture Analyzer PCE-UX 3011GQD
£ 3,974.00
Price excl. VAT &. delivery
Our Moisture Analyser / Moisture Analyzer is a precise device for determining dry matter Good Laboratory Practice content in samples. It is suitable for applications in raw material extraction, production, processing, storage, trade, research and recycling. With a maximum sample weight of 200 g and a high resolution of 0.001 g, the Moisture Analyser / Moisture Analyzer enables exact measurements of the moisture content and the ash residue.

  • weighing range: 0 ... 200 g
  • resolution: 0.001 g
  • absolute moisture: 0 ... 100 %
  • resolution: 0.01 %
  • heating temperature: 105 ... 600 °C
  • % moisture
  • % dry matter
  • % moisture bd
  • g residual weight / kg
  • residual weight
  • % residue on ignition
  • % loss on ignition
  • data interface: RS232, USB, V24
  • GLP data management
  • Data Bridge software (optional)
  • with built-in printer