Products for 'NDT Tester PCE GM 55 ICA incl. ISO Calibration Certificate '

£ 890.00

Price excl. VAT &. delivery

The NDT tester PCE-GM 55 is a 3-angle gloss meter. The measuring angles of the gloss meter are 20°, 45° and 75°. This allows the NDT tester to be used for gloss measurements in the high gloss and medium gloss ranges. The special measuring angle of 75° allows, among other things, measurements of the degree of gloss on paper and textiles.

Range : 0 … 200 gloss units / highlights
Accuracy: ± 1 gloss units
Repeatability: ± 0.5 gloss units
Optical angle: 20°, 45°, 75°
For medium and high gloss
Measurements on textiles and paper possible

NDT Test Instruments PCE-COM 20-ICA incl. ISO Calibration Certificate

£ 5,371.00

Price excl. VAT &. delivery

PCE-COM 20-ICA is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

Operating frequency: 60 kHz
Sine wave probe: Ø 14 mm / ≈ 0.55 in
Memory: Up to 500 groups of measurements
Lift-off and temperature compensation
Automatic calibration
incl. ISO Calibration Certificate

Conductivity Tester for Metals PCE-COM 20-ICA incl. ISO Calibration Certificate

£ 5,371.00

Price excl. VAT &. delivery

Operating frequency: 60 kHz
Sine wave probe: Ø 14 mm / ≈ 0.55 in
Memory: Up to 500 groups of measurements
Lift-off and temperature compensation
Automatic calibration
incl. ISO Calibration Certificate

Material Tester for Metals PCE-COM 20-ICA incl. ISO Calibration Certificate

£ 5,371.00

Price excl. VAT &. delivery

PCE-COM 20-ICA is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

Operating frequency: 60 kHz
Sine wave probe: Ø 14 mm / ≈ 0.55 in
Memory: Up to 500 groups of measurements
Lift-off and temperature compensation
Automatic calibration
incl. ISO Calibration Certificate

NDT Tester - Gloss Meter PCE-GM 80-ICA incl. ISO Calibration Certificate

£ 674.00

Price excl. VAT &. delivery

The NDT Tester - Gloss Meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

Measurement geometry: 60°
Measuring range up to 1000 GU
Measuring surface: Ø 4.5 mm
Data storage: 1245 measured values
Interface: Micro USB
Incl. ISO calibration certificate

NDT Tester - Gloss Meter PCE-GM 75-ICA Incl. ISO Calibration Certificate

£ 552.00

Price excl. VAT &. delivery

The NDT tester - gloss meter has a measuring surface of Ø 4.5 mm. Thanks to this small measuring surface, the gloss meter enables measurements on particularly small surfaces. With a maximum inaccuracy of 1%, the gloss meter is a high-precision measuring instrument for fast and easy measurements on surfaces.

Measuring range up to 1000 GU
For measurements on small surfaces
Precise measurements thanks to high accuracy
Micro-USB interface for the PC connection
Data memory for later evaluations
Data memory: 1,245 measured values- Incl. ISO calibration certificate

NDT Tester - Surface Tester PCE-CT 100N-ICA incl. ISO Calibration Certificate

£ 1,485.00

Price excl. VAT &. delivery

The coating thickness NDT Tester - surface tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the NDT tester are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

Brightness Tester PCE-CSM 7-ICA incl. ISO-Calibration Certificate

£ 3,770.00

Price excl. VAT &. delivery

PCE-CSM 7 is a portable Brightness Tester used to measure different spectral parameters. This user-friendly, ergonomically designed Brightness Tester automatically performs a white and black calibration when powered on. Suitable for manufacturing quality control as well as product research and development, the Brightness Tester offers impressive measuring accuracy and comes manufacturer calibrated. Camera/illumination locating for small samples.

Color spaces: CIEL*a*b*C*h* CIEL*a*b* CIEXYZ CIERGB CIEL*u*v* CIEL*C*h +Yellowness + Whiteness + Color Fastness
Offers two different measuring apertures, 4 and 8 mm
Three light sources D65, D50, A
optional liquid sample kit listed under accessories
Storage of 100 reference values and 20,000 samples
Illumination/Viewing Angles 8°/d
incl. ISO-Calibration Certificate

NDT Tester - Gloss Meter PCE-GM 60Plus-ICA incl. ISO calibration certificate

£ 505.00

Price excl. VAT &. delivery

The PCE-GM 60Plus NDT tester or gloss meter is a portable handheld 60 degree gloss meter. This coating and paint gloss meter measures the gloss units (GU) on a material's surface. The rechargeable gloss meter or gloss tester uses reflected light for gloss measurement per ISO 2813, GB/T 9754, ASTM D523 and ASTM D2457 standards.

Measuring geometry: 60° degree angle
Measuring range: 0 … 200 GU
Measuring accuracy ±1.5 GU
3.5" TFT touchscreen display
Light source: D65
Wave length: 400-700 nm
Incl. ISO calibration certificate