Products for 'NDT Tester PCE CT 90 ICA Incl. ISO Calibration Certificate '

NDT Tester - Surface Tester PCE-CT 100N-ICA incl. ISO Calibration Certificate

£ 1,485.00

Price excl. VAT &. delivery

The coating thickness NDT Tester - surface tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the NDT tester are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

NDT Test Instruments PCE-COM 20-ICA incl. ISO Calibration Certificate

£ 5,371.00

Price excl. VAT &. delivery

PCE-COM 20-ICA is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

Operating frequency: 60 kHz
Sine wave probe: Ø 14 mm / ≈ 0.55 in
Memory: Up to 500 groups of measurements
Lift-off and temperature compensation
Automatic calibration
incl. ISO Calibration Certificate

NDT Test Instruments PCE-CT 100N-ICA incl. ISO Calibration Certificate

£ 1,485.00

Price excl. VAT &. delivery

The coating thickness automotive tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the automotive tester are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

Conductivity Tester for Metals PCE-COM 20-ICA incl. ISO Calibration Certificate

£ 5,371.00

Price excl. VAT &. delivery

Operating frequency: 60 kHz
Sine wave probe: Ø 14 mm / ≈ 0.55 in
Memory: Up to 500 groups of measurements
Lift-off and temperature compensation
Automatic calibration
incl. ISO Calibration Certificate

Material Tester for Metals PCE-COM 20-ICA incl. ISO Calibration Certificate

£ 5,371.00

Price excl. VAT &. delivery

PCE-COM 20-ICA is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

Operating frequency: 60 kHz
Sine wave probe: Ø 14 mm / ≈ 0.55 in
Memory: Up to 500 groups of measurements
Lift-off and temperature compensation
Automatic calibration
incl. ISO Calibration Certificate

Automotive Tester PCE-CT 100N-ICA incl. ISO Calibration Certificate

£ 1,485.00

Price excl. VAT &. delivery

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

NDT Test Instrument PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate

£ 1,003.00

Price excl. VAT &. delivery

The PCE-TG 300-NO5/90 is an NDT test instrument for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the NDT test instrument. Wall thicknesses under a coating can also be measured with the NDT test instrument.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth
incl. ISO calibration certificate

Brightness Tester PCE-CSM 7-ICA incl. ISO-Calibration Certificate

£ 3,770.00

Price excl. VAT &. delivery

PCE-CSM 7 is a portable Brightness Tester used to measure different spectral parameters. This user-friendly, ergonomically designed Brightness Tester automatically performs a white and black calibration when powered on. Suitable for manufacturing quality control as well as product research and development, the Brightness Tester offers impressive measuring accuracy and comes manufacturer calibrated. Camera/illumination locating for small samples.

Color spaces: CIEL*a*b*C*h* CIEL*a*b* CIEXYZ CIERGB CIEL*u*v* CIEL*C*h +Yellowness + Whiteness + Color Fastness
Offers two different measuring apertures, 4 and 8 mm
Three light sources D65, D50, A
optional liquid sample kit listed under accessories
Storage of 100 reference values and 20,000 samples
Illumination/Viewing Angles 8°/d
incl. ISO-Calibration Certificate

Environmental Tester PCE-428-EKIT-ICA incl. ISO Calibration Certificate

£ 3,698.00

Price excl. VAT &. delivery

The environmental tester PCE-428-EKIT-ICA, from the field of environmental measurement technology, is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The environmental tester is equipped with an octave band frequency filter. Optionally, the environmental tester can be upgraded with a 1/3 octave band filter. The additional kit for outdoor sound measurement makes it possible to measure outdoor noise with an environmental meter over a long period of time, even in the rain.

Accuracy class 2
A, B, C & Z frequency rating
Fast, Slow, Pulse and Peak time weighting
Statistics function
1/1 octave band included
1/3 octave band optional
incl. outdoor noise level meter kit PCE-4xx-EKIT
Outdoor measurement of sound and noise
incl. ISO calibration certificate