Products for 'Material Tester PCE CT 90 ICA Incl. ISO Calibration Certificate '

Material Tester for Metals PCE-COM 20-ICA incl. ISO Calibration Certificate

£ 5,371.00

Price excl. VAT &. delivery

PCE-COM 20-ICA is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

Operating frequency: 60 kHz
Sine wave probe: Ø 14 mm / ≈ 0.55 in
Memory: Up to 500 groups of measurements
Lift-off and temperature compensation
Automatic calibration
incl. ISO Calibration Certificate

Material Tester PCE-RT 2300-ICA Incl. ISO Calibration Certificate

£ 2,257.00

Price excl. VAT &. delivery

The material tester PCE-RT 2300 is used to measure the roughness of surfaces. The PCE-RT 2300 material tester has a detachable motorized sensor that allows the material tester to determine the surface roughness even on small or narrow profiles. Free software download for remote test control and data save to Windows PC and memory for 100 records of internal data.

Large measuring range: Rz: 0.02 μm … 320 μm; Ra, Rq: 0.005 μm … 32 μm
Accuracy of ± 10% and repeat accuracy of ± 6%
Touchscreen configuration and Android/printer bluetooth connectivity
Sensor has diamond test head with 90-degree cone angle
Optional sensors and extension rod for small holes and curved surfaces

Material Tester PCE-RT 2200-ICA Incl. ISO Calibration Certificate

£ 2,136.00

Price excl. VAT &. delivery

The portable and easy-to-use material tester with an OLED display is particularly suitable for quick and accurate measurements in the workshop or laboratory. The material tester uses a DSP chip for control and data processing at high speed and low energy consumption.

21 measurement parameters: Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc, Rmax, Ry (JIS), Rz (JIS), RP (ASME), Rpm (ASME), Rv (ASME), R3z, R3zmax, Rz1max, Rmr (c), Rdc, Rmr
Large graphic OLED display
Memory: 20 measurement histories with all parameters
USB interface
Incl. ISO calibration certificate

Material Tester PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate

£ 1,003.00

Price excl. VAT &. delivery

The PCE-TG 300-NO5/90 is a material tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material tester. Wall thicknesses under a coating can also be measured with the material tester.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth
incl. ISO calibration certificate

Material Hardness Tester PCE-2900-ICA incl. ISO Calibration Certificate

£ 1,780.00

Price excl. VAT &. delivery

The material hardness tester PCE-2900 has been developed for hardness measurements on metallic materials. The material hardness tester PCE-2900 measures the material hardness in Vickers, Brinell, Rockwell, Leeb and Shore. The material hardness tester PCE-2900 measures the hardness according to the Leeb rebound principle.

Measurement according to Leeb Rebound method
Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS
Accuracy: ± 0.5%, Repeatability: ± 0.6%
Impactor: Type D
USB and WiFi for data transmission
Incl. ISO Calibration Certificate

Material Tester PCE-RT 11-ICA Incl. ISO Calibration Certificate

£ 1,447.00

Price excl. VAT &. delivery

The Material Tester PCE-RT 11-ICA is a portable measuring instrument for determination of surface roughness according to Ra, Rz, Rq and Rt in just one device.

Measures Ra, Rz, Rq and Rt in both Metric (µm) and Imperial (µinch)
Ra, Rq: 0.05 µm … 10 µm / 0.002 µinch … 394 µinch measurement range
Rz, Rt: 0.1 µm … 50 µm / 0.004 µinch …1968 µinch measurement range
Robust Piezoelectric sensor
Accuracy: ± 15% and Repeatability < 12%
Built-in rechargeable li-ion battery
Inc. ISO Calibration Certificate

Automotive Tester PCE-CT 100N-ICA incl. ISO Calibration Certificate

£ 1,485.00

Price excl. VAT &. delivery

The coating thickness automotive tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the automotive tester are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

Material Thickness Meter PCE-CT 100N-ICA incl. ISO Calibration Certificate

£ 1,485.00

Price excl. VAT &. delivery

The material thickness meter works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the material thickness meter are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

Conductivity Tester for Metals PCE-COM 20-ICA incl. ISO Calibration Certificate

£ 5,371.00

Price excl. VAT &. delivery

PCE-COM 20-ICA is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

Operating frequency: 60 kHz
Sine wave probe: Ø 14 mm / ≈ 0.55 in
Memory: Up to 500 groups of measurements
Lift-off and temperature compensation
Automatic calibration
incl. ISO Calibration Certificate