The panel indicator can be used to measure AC voltages up to 400 V and AC currents. The voltage to be measured is connected directly and can then be read on the 5-digit LED display of the panel indicator.

- Input:
   1A AC, 5A AC, 100V AC, 250V AC,
   400 V AC, 20 ... 500 Hz (selectable)
- Supply voltage:
   85 ... 253V AC/DC / 20 ... 40 V AC/DC (selectable)
- Display: 5 digits, three colors
- Digit height: 14 mm / 0.55"

- Input:
   1A AC, 5A AC, 100V AC, 250V AC,
   400 V AC, 20 ... 500 Hz (selectable)
- Supply voltage:
   85 ... 253V AC/DC / 20 ... 40 V AC/DC (selectable)
- Display: 5 digits, three colors
- Digit height: 14 mm / 0.55"

The Easycount-1-CEE-U 1-Phase energy meter is an electricity meter for alternating voltages up to 230 V, enclosed in a splash-proof and impact-resistant housing. The cable ends of the Easycount-1-CEE-U energy meter are equipped with male and female connectors.

- Uncalibrated counter
- Voltage input: 230 VAC
- Current rating: 16 A
- Frequency: 50 HZ

The Easycount-1-Schuko-U 1-Phase energy meter is an electricity meter for alternating voltages up to 230 V, enclosed in a splash-proof and impact-resistant housing. The cable ends of the Easycount-1-Schuko-U energy meter are equipped with male and female connectors.

- Uncalibrated counter
- Voltage input: 230 VAC
- Current rating: 16 A
- Frequency: 50 HZ

The Easycount-1-CEE-U energy meter is an electricity meter for alternating voltages up to 230 V, enclosed in a splash-proof and impact-resistant housing. The cable ends of the Easycount-1-CEE-U energy meter are equipped with male and female connectors.

- Uncalibrated counter
- Voltage input: 230 VAC
- Current rating: 16 A
- Frequency: 50 HZ

 

The Easycount-1-Schuko-U energy meter is an electricity meter for alternating voltages up to 230 V, enclosed in a splash-proof and impact-resistant housing. The cable ends of the Easycount-1-Schuko-U energy meter are equipped with male and female connectors.

- Uncalibrated counter
- Voltage input: 230 VAC
- Current rating: 16 A
- Frequency: 50 HZ

 

- Measuring range: 0 ... 2000 Ω
- Measuring principle: Continuity test / earth resistance measurement
- Multi-coloured, backlit LCD
- Installation category III
- 50/60 Hz operating voltage

- Input:
   1A AC, 5A AC, 100V AC, 250V AC,
   400 V AC, 20 ... 500 Hz (selectable)
- Supply voltage:
   85 ... 253V AC/DC / 20 ... 40 V AC/DC (selectable)
- Display: 5 digits, three colors
- Digit height: 14 mm / 0.55"

- Input:
   1A AC, 5A AC, 100V AC, 250V AC,
   400 V AC, 20 ... 500 Hz (selectable)
- Supply voltage:
   85 ... 253V AC/DC / 20 ... 40 V AC/DC (selectable)
- Display: 5 digits, three colors
- Digit height: 14 mm / 0.55"

The HVAC meter is a good solution for anyone who wants to check the conductivity of ultrapure water and to accurately determine the salinity of liquids. 

- conductivity: 0 ... 20 µS/cm ...
- salinity: 0.00 ... 10.00 ppt
- temperature: 0 ... 60 °C / 32 ... 140 °F
- automatic temperature compensation
- internal 3-point calibration

The conductivity meter is a good solution for anyone who wants to check the conductivity of ultrapure water and to accurately determine the salinity of liquids. 

- conductivity: 0 ... 20 µS/cm ...
- salinity: 0,00 ... 10.00 ppt
- temperature: 0 ... 60 °C / 32 ... 140 °F
- automatic temperature compensation
- internal 3-point calibration

The salt meter is a good solution for anyone who wants to check the conductivity of ultrapure water and to accurately determine the salinity of liquids. 

- conductivity: 0 ... 20 µS/cm ...
- salinity: 0.00 ... 10.00 ppt
- temperature: 0 ... 60 °C / 32 ... 140 °F
- automatic temperature compensation
- internal 3-point calibration

The HVACR tester was developed and constructed for the permanent monitoring of temperature or humidity. The compact dimensions of the HVACR tester are the characteristics of this instrument. The measurement of the temperature and humidity is via a semiconductor component.

- Humidity measuring range: 0 ... 100% RH
- Temperature measuring range: -20 ... 60 °C
- Output: 4 ... 20 mA
- Special Feature: Manual switchable analog value output

 

The USB Parcel Scale PCE-PB 60N is a versatile platform scale. The functions of the USB parcel scale are very extensive, but one function is particularly interesting for shipping. It is the bidirectional USB interface of the parcel scale that enables control by the PC.

- Weighing range: 60 kg / 132 lb
- Readability: 20 g
- Calibratable
- Bidirectional USB interface
- Piece counting function with reference number of pieces
- Multiple tare
- Stainless steel platform

The surface testing - temperature meter has a measuring range of -50 ... +500 °C and an adjustable emission value between 0.10 ... 1.00. In addition to the current reading, the largest, smallest, average and differential reading can be displayed.

- Measuring range: -50 … 500 °C / -58 … 932 °F
- Resolution: 0.1°C
- Accuracy: ±3 °C / ±5.4 °F at -50 … 20 °C / -58 … 68 °F
- Spot ratio: 12:1
- Multipoint laser

The HVAC meter has a measuring range of -50 ... +500 °C and an adjustable emission value between 0.10 ... 1.00. In addition to the current reading, the largest, smallest, average and differential reading can be displayed.

- Measuring range: -50 … 500 °C / -58 … 932 °F
- Resolution: 0.1°C
- Accuracy: ±3 °C / ±5.4 °F at -50 … 20 °C / -58 … 68 °F
- Spot ratio: 12:1
- Multipoint laser

The infrared thermometer has a measuring range of -50 ... +500 °C and an adjustable emission value between 0.10 ... 1.00. In addition to the current reading, the largest, smallest, average and differential reading can be displayed.

- Measuring range: -50 … 500 °C / -58 … 932 °F
- Resolution: 0.1°C
- Accuracy: ±3 °C / ±5.4 °F at -50 … 20 °C / -58 … 68 °F
- Spot ratio: 12:1
- Multipoint laser