• wet and dry density, % compaction, % moisture
• measuring depth: 50 ... 300 mm
• measurement within 5 seconds
• internal data memory for 4200 values
• status bar for GPS signal, memory and battery
• 5-inch touch screen
• location determination via GPS
• software
• standard(s) ASTM D4318, ASTM D422, ASTM D4698, ASTM D1557

The contact thermometer is a highly accurate 1-channel temperature measuring device. The contact thermometer is ideally suited to operate various PT-100 sensors and thus for condition monitoring. By using four-wire technology, the response time is particularly fast and accurate.

• Measuring range: -100 … +400 °C / -148 … 752 °F
• Accuracy: ± 0.05% + 0.1 °C / 0.18 °F (at 18 to 28 °C / 64.4 … 82.4 °F) device only
• Resolution: 0.01 °C / 0.018 °F
• PT-100 sensor

The contact thermometer with microprocessor is a high precision 1-channel temperature gauge. The contact thermometer with microprocessor is ideal for use with various Pt100 sensors. Due to the fact that it uses 4-wire technology, it has a very fast response time and precision.

• 1 channel temperature recorder
• Automatic shutdown
• High accuracy of ± 2% r.H.
• Sampling rate of 2 / sec
• Memory size: 5,000 values
• Incl. ISO calibration certificate

• wet and dry density, % compaction, % moisture
• measuring depth: 50 ... 300 mm
• measurement within 5 seconds
• internal data memory for 4200 values
• status bar for GPS signal, memory and battery
• 5-inch touch screen
• location determination via GPS
• software
• standard(s) ASTM D4318, ASTM D422, ASTM D4698, ASTM D1557

The Contact Thermometer has two measuring inputs. Each measuring input from the Contact Thermometer can be connected to a thermocouple of type K, T and J. With a measuring rate of 2 Hz, the Contact Thermometer shows rapid temperature fluctuations.

• Measuring range dependent on sensor: -200 … 1370 °C / -328 … 2498 °F
• Resolution: 0.01 °C
• Two-channel temperature data logger
• For thermocouples type K, T and J
• Data storage for 20,000 measuring points

The PCE-JR-911 Non-Contact Thermometer is a versatile tool in that it can measure the temperature of objects without contact and readings can be stored in memory and transferred to a computer by way of its RS-232 interface and software. This Non-Contact Thermometer comes complete with a Thermometer, allowing the user to program specific time intervals for taking measurements, such as over an entire week. Each temperature meter comes manufacturer calibrated and can be certified according to the ISO standards as an option.

• Temperature range: -40 to 500°C / -40 … 932°F
• Resolution: 0.1°C / 0.18°F
• Accuracy: ±2% of reading or ±2°C / 3.6°F
• Optical resolution: 8:1
• Emissivity: 0.3 to 1.0 (adjustable)
• Interface: RS-232
• Display: LCD

The PCE-JR-911 Non-Contact Food Thermometer is a versatile tool in that it can measure the temperature of objects without contact and readings can be stored in memory and transferred to a computer by way of its RS-232 interface and software. This Non-Contact Food Thermometer comes complete with a Thermometer, allowing the user to program specific time intervals for taking measurements, such as over an entire week. Each temperature meter comes manufacturer calibrated and can be certified according to the ISO standards as an option.

• Temperature range: -40 to 500°C / -40 … 932°F
• Resolution: 0.1°C / 0.18°F
• Accuracy: ±2% of reading or ±2°C / 3.6°F
• Optical resolution: 8:1
• Emissivity: 0.3 to 1.0 (adjustable)
• Interface: RS-232
• Display: LCD

The thermometer is specially designed for long-term monitoring of climatic conditions in, for example, offices, classrooms or lecture halls. The thermometer is equipped with various sensors.

Parameters / Measuring ranges:

• Temperature: 0 … +50 ºC / 32 … 122 ºF
• Ambient humidity: 0 … 100% RH
• Atmospheric pressure: 300 … 2000 hPa
• CO2: 0 … 40000 ppm
• 32 GB data storage
• E-paper display with histogram display
• Good / medium / bad rating
• Battery life: approx. 10 months