• Professional pH electrode
• Measuring range: 0 ... 14 pH
• Diameter: 26.5 mm
• Temperature range: 0 ... 95 °C
• Shaft / sensor material: PPS
• Connection: BNC
• Application: Water treatment, aquariums etc.

Mini Voltmeter for measuring AC current, AC voltage, DC current and frequency.

• AC current (50/60 Hz): 200 A / 0.1 A or 100 mA / ±3.0% + 8 digits
• DC current: 200 A / 0.1 A or 100 mA / ±2.8% + 8 digits
• AC test voltage (without contact): 100 VAC to 600 VAC 50 / 60 Hz
• Frequency: 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

Clamp on Tester for measuring AC current, AC voltage, DC current and frequency. The reduced dimensions of this device allow for measurements to be taken in places with limited access. The backlight display ensures that it is easy to read, even in places with limited light available, such as electrical cabinets or in cabling ducts. The Clamp on Tester (as all the test instruments) comes manufacturer calibrated - ISO certification is available as an option.

• AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
• DC current: 200 A / 100-mA / ±2.8% + 8 digits
• AC test voltage (without contact):100 VAC to 600 VAC at 50 /  60 Hz
• Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz / 0.51 to 1 kHz

The HVAC Meter has been designed to detect, indirectly, AC/DC current and frequency. The HVAC Meter has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.

• AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
• DC current: 200 A / 100-mA / ±2.8% + 8 digits
• AC test voltage (without contact): 100 VAC to 600 VAC 50 / 60 Hz
• Frequency: 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

The Current Clamp has been designed to detect, indirectly, AC/DC current and frequency. The Current Clamp has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.

• AC current (50/60 Hz): 200 A / 100-mA / ±3.0% + 8 digits
• DC current:200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
• AC test voltage (without contact):100 VAC to 600 VAC 50 /  60 Hz
• Frequency: 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

The Electrical Tester has been designed to detect, indirectly, AC/DC current and frequency. The Electrical Tester has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.

• AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
• DC current: 200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
• AC test voltage (without contact):100 VAC to 600 VAC 50 / 60 Hz
• Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

The PT-100-transducer PCE-P17PT converts the output signal of a PT100. The PT-100-transducer PCE-P17PT issues the temperature signal as a 4 … 20 mA standard signal.

• Signal converter for RTD
• Power supply via electricity loop
• Low installation width 

The PT-100-transducer PCE-P17PT converts the output signal of a PT100. The PT-100-transducer PCE-P17PT issues the temperature signal as a 4 … 20 mA standard signal.

• Signal converter for RTD
• Power supply via electricity loop
• Low installation width