Products for 'Tierwaage DB2 3060 SR mit Eichzulassung '

£ 2,786.00

Price excl. VAT &. delivery
2 year Warranty

The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Pipe size: DN 15 ... 100 / 20 ... 108 mm

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- Measuring parameters: flow velocity,
volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 10 million measuring points

- LiPo battery

Ultrasonic Flow Meter PCE-TDS 200 SR

£ 1,948.00

Price excl. VAT &. delivery
2 year Warranty

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Pipe size: DN 15 ... 100 / 20 ... 108 mm

- for different media

- for different pipe materials

- Measuring parameters: Flow velocity,
volume flow and volume

- Interface: USB

- Data logger: 10 million measuring points

- LiPo battery

Clamp-on Ultrasonic Flow Meter PCE-TDS 200+ SR-ICA incl. ISO-Calibration Certificate

£ 3,040.00

Price excl. VAT &. delivery
2 year Warranty

The Clamp-on Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Clamp-on Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Sensor for pipe diameters DN 15 ... 100 / 20 ... 108 mm

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- Measuring parameters: flow velocity, volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO-Calibration Certificate

Portable Ultrasonic Flow Meter PCE-TDS 200+ SR-ICA incl. ISO Calibration Certificate

£ 3,040.00

Price excl. VAT &. delivery
2 year Warranty

The Portable Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Portable Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Sensor for pipe diameters DN 15 ... 100 / 20 ... 108 mm

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- Measuring parameters: flow velocity, volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO Calibration Certificate

Ultrasonic Flow Meter PCE-TDS 200+ SR-ICA incl. ISO-Calibration Certificate

£ 3,040.00

Price excl. VAT &. delivery
2 year Warranty

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Pipe size: DN 15 ... 100 / 20 ... 108 mm

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- Measuring parameters: flow velocity,
volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 10 million measuring points

- LiPo battery
- incl. ISO-Calibration Certificate

Portable Ultrasonic Flow Meter PCE-TDS 200 SR

£ 1,948.00

Price excl. VAT &. delivery
2 year Warranty

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Sensor for pipe diameters: DN 15 ... 100 / 20 ... 108 mm

- for different media

- for different pipe materials

- Measuring parameters: Flow velocity, volume flow and volume

- Interface: USB

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery

Clamp-on Ultrasonic Flow Meter PCE-TDS 200 SR-ICA incl. ISO-Calibration Certificate

£ 2,195.00

Price excl. VAT &. delivery
2 year Warranty

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Sensor for pipe diameters: DN 15 ... 100 / 20 ... 108 mm

- for different media

- for different pipe materials

- Measuring parameters: Flow velocity, volume flow and volume

- Interface: USB

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO-Calibration Certificate

Ultrasonic Flow Meter PCE-TDS 200 SR-ICA incl. ISO-Calibration Certificate

£ 2,195.00

Price excl. VAT &. delivery
2 year Warranty

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Pipe size: DN 15 ... 100 / 20 ... 108 mm

- for different media

- for different pipe materials

- Measuring parameters: Flow velocity,
volume flow and volume

- Interface: USB

- Data logger: Pipe size: DN10 million measuring points

- LiPo battery
- incl. ISO-Calibration Certificate

PCE-TDS 200 SR SENSOR On Rail sensors for the Ultrasonic Flow Meter

£ 507.00

Price excl. VAT &. delivery
2 year Warranty

Connected on-rail sensors for pipe sizes DN 15 ... 100 / 20 ... 108 mm. Both sensors are located on one rail to simplify the positioning of the sensors. For easier handling, there is a corresponding handle on the rail.

Magnets are located underneath the rails to enable it to hold on to pipes with a ferrous metal by itself.

- Pipe sizes: DN 15 ... 100 / 20 ... 108 mm / 0.6 ... 3.9 / 0.7 ... 4.2"

- Important! If you order the sensor at a later date, we require the PCE-TDS 200 hand-held unit,
in order to match the sensor to the hand-held unit!

Concrete Hardness Tester PCE-HT-450

£ 1,320.00

Price excl. VAT &. delivery
2 year Warranty

The concrete hardness tester is an analog measuring device to determine concrete strength. The measuring method of the concrete hardness tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the concrete hardness tester. The resulting rebound enables the concrete hardness tester to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle

Concrete Rebound Test Hammer PCE-HT-450

£ 1,320.00

Price excl. VAT &. delivery
2 year Warranty

The concrete rebound test hammer is an analog measuring device to determine concrete strength. The measuring method of the concrete rebound test hammer is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the concrete rebound test hammer. The resulting rebound enables the concrete rebound test hammer to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle

Durometer PCE-HT-450

£ 1,320.00

Price excl. VAT &. delivery
2 year Warranty

The durometer is an analog measuring device to determine concrete strength. The measuring method of the concrete durometer is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the durometer. The resulting rebound enables the durometer to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle

Material Tester PCE-HT-450

£ 1,320.00

Price excl. VAT &. delivery
2 year Warranty

The material tester is an analog measuring device to determine concrete strength. The measuring method of the material tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the material tester. The resulting rebound enables the material tester to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle

NDT Tester - Hardness Tester PCE-HT-450

£ 1,320.00

Price excl. VAT &. delivery
2 year Warranty

The NDT tester - hardness tester is an analog measuring device to determine concrete strength. The measuring method of the NDT tester - hardness tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the NDT tester - hardness tester. The resulting rebound enables the NDT tester - hardness tester to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle

Roll Hardness Tester PCE-HT-450

£ 1,320.00

Price excl. VAT &. delivery
2 year Warranty

The roll hardness tester is an analog measuring device to determine concrete strength. The measuring method of the roll hardness tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the roll hardness tester. The resulting rebound enables the roll hardness tester to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle

Surface Testing - Concrete Hammer PCE-HT-450

£ 1,320.00

Price excl. VAT &. delivery
2 year Warranty

The surface testing - concrete hammer is an analog measuring device to determine concrete strength. The measuring method of the surface testing - concrete hammer is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the surface testing - concrete hammer. The resulting rebound enables the surface testing - concrete hammer to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle

Portable Ultrasonic Flow Meter PCE-TDS 200+ ML

£ 2,955.00

Price excl. VAT &. delivery
2 year Warranty

The Portable Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the

Portable Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0,001 m/s

- incl. sensor set

- Sensor for pipe diameters DN 50 ... 700 / 57 ... 720 mm, DN 300 ... 6000 mm

- Temperature resistance: -30 ... 160 °C

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- Measuring parameters: flow velocity, volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery

Ultrasonic Flow Meter PCE-TDS 200+ ML

£ 2,955.00

Price excl. VAT &. delivery
2 year Warranty

The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the

ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0,001 m/s

- incl. sensor set

- Pipe size:
DN 50 ... 700 / 57 ... 720 mm,
DN 300 ... 6000 mm

- Temperature resistance: -30 ... 160 °C

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- Measuring parameters: flow velocity
volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 10 million measuring points

- LiPo battery