Products for 'Geeichte Waage PCE MS F6T 150 400 '

£ 6,654.00

Price excl. VAT &. delivery
2 year Warranty

The Test Stand is used for rapid testing of the melt mass flow rate of plastics. The Test Stand device is designed for both incoming goods inspection and continuous production monitoring.

- Melting rate: 0.1 to 400.0 g / 10 min
- Heating temperature: 120 ... 400°C / 248 ... 752°F
- Measuring accuracy temperature: ± 0.2°C / 0.36°F
- Resolution: 0.1°C / 0.18°F
- Large 7" TFT touch display
- Already pre-set materials
- Various weights included
- Standards: ISO1133-1997, ASTM 1238-04C, GB / T3682-2000

Melt Flow Index Tester PCE-MFI 400

£ 6,654.00

Price excl. VAT &. delivery
2 year Warranty

The melt flow index tester is used for rapid testing of the melt mass flow rate of plastics. The material flow tester device is designed for both incoming goods inspection and continuous production monitoring.

Material Flow Index Tester / Plastometer PCE-MFI 400

£ 6,654.00

Price excl. VAT &. delivery
2 year Warranty

The material flow index tester is used for rapid testing of the melt mass flow rate of plastics. The material flow index tester device is designed for both incoming goods inspection and continuous production monitoring.

Electrical Tester PCE-IT 150

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

The electrical tester is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 ... 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the electrical tester.

- Insulation resistance: 0 ... 30 TΩ

- Accuracy: ± (5% of Mw.+5 digits)

- Test voltage: 500 V ... 15 kV

- Direct alternating voltage: 30 ... 600 V

- Accuracy: ± (2.0% v.Mw. +3 digits)

- Polarisation index PI

- Dielectric absorption ratio DAR

- Memory and software

Insulation Tester PCE-IT 150

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

The insulation tester is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 ... 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the insulation tester.

- Insulation resistance: 0 ... 30 TΩ

- Accuracy: ± (5% of Mw.+5 digits)

- Test voltage: 500 V ... 15 kV

- Direct alternating voltage: 30 ... 600 V

- Accuracy: ± (2.0% v.Mw. +3 digits)

- Polarisation index PI

- Dielectric absorption ratio DAR

- Memory and software

Isolation Meter PCE-IT 150

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

The isolation meter is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 ... 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the isolation meter.

- Insulation resistance: 0 ... 30 TΩ

- Accuracy: ± (5% of Mw.+5 digits)

- Test voltage: 500 V ... 15 kV

- Direct alternating voltage: 30 ... 600 V

- Accuracy: ± (2.0% v.Mw. +3 digits)

- Polarisation index PI

- Dielectric absorption ratio DAR

- Memory and software

PAT Tester PCE-IT 150

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

The PAT tester is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 ... 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the PAT tester.

- Insulation resistance: 0 ... 30 TΩ

- Accuracy: ± (5% of Mw.+5 digits)

- Test voltage: 500 V ... 15 kV

- Direct alternating voltage: 30 ... 600 V

- Accuracy: ± (2.0% v.Mw. +3 digits)

- Polarisation index PI

- Dielectric absorption ratio DAR

- Memory and software

Photovoltaic Meter PCE-IT 150

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

The photovoltaic meter is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 ... 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the photovoltaic meter.

- Insulation resistance: 0 ... 30 TΩ

- Accuracy: ± (5% of Mw.+5 digits)

- Test voltage: 500 V ... 15 kV

- Direct alternating voltage: 30 ... 600 V

- Accuracy: ± (2.0% v.Mw. +3 digits)

- Polarisation index PI

- Dielectric absorption ratio DAR

- Memory and software

Wall Thickness Meter PCE-TG 150 HT

£ 846.00

Price excl. VAT &. delivery
2 year Warranty

The wall thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the wall thickness meter.

- Measuring range: 1.20 ... 300.0 mm / 0.04 ... 11.81"
- Accuracy: ±0.5% of measured value + 0.05 mm
- Memory capacity: 1500 measured values
- Calibration reference on housing
- High temperature probe: -10 ... 350 °C / 14 ... 662 °F

Wall Thickness Meter PCE-TG 150 HT

£ 846.00

Price excl. VAT &. delivery
2 year Warranty

Material Thickness Meter PCE-TG 150 HT

£ 846.00

Price excl. VAT &. delivery
2 year Warranty

The material thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the material thickness meter.

Thickness Meter PCE-TG 150 HT

£ 846.00

Price excl. VAT &. delivery
2 year Warranty

The thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the thickness meter.

Ultrasonic Thickness Tester PCE-TG 150 HT

£ 846.00

Price excl. VAT &. delivery
2 year Warranty

The ultrasonic thickness tester can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the ultrasonic thickness tester.

Thickness Gauge PCE-TG 150 HT

£ 846.00

Price excl. VAT &. delivery
2 year Warranty

The thickness gauge can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the thickness gauge.

Paint Thickness Gauge PCE-TG 150 HT

£ 846.00

Price excl. VAT &. delivery
2 year Warranty

The paint thickness gauge can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the paint thickness gauge.

Paint Thickness Tester PCE-TG 150 HT

£ 846.00

Price excl. VAT &. delivery
2 year Warranty

The paint thickness tester can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the paint thickness tester.

HVAC Meter PCE-TG 150 HT

£ 846.00

Price excl. VAT &. delivery
2 year Warranty

The HVAC thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the HVAC thickness meter.

Industrial Silo Scale PCE-SDF 150

£ 618.00

Price excl. VAT &. delivery
2 year Warranty

The industrial scale for silos - fill level - removal - monitoring - offers the possibility to ensure the supply of a production facility effectively and reliably. The industrial scale for container monitoring can not only monitor the current filling level of the container but also the continuous weight loss.

- Weighing range up to 150 kg / 330 lb
- Readability: 5 g / 0.17 oz
- Accuracy: ± 20 g / 0.7 oz
- Bidirectional RS-232 interface
- Platform size: 400 x 500 mm / 15.7 x 19.6"