The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Pipe size: DN 300 ... 6000 mm

- Sensor dimensions: 91 x 52 x 44 mm

- for different media

- for different pipe materials

- measuring parameters: flow velocity,
  volume flow, volume

  temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 10 million measuring points

- LiPo battery

The Portable Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Sensor for pipe diameter DN 300 ... 6000 mm

- Sensor dimensions: 91 x 52 x 44 mm

- for different media

- for different pipe materials

- measuring parameters: flow velocity, volume flow, volume

  temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery

The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Pipe size: DN 300 ... 6000 mm

- Sensor dimensions: 91 x 52 x 44 mm

- for different media

- for different pipe materials

- measuring parameters:
  flow velocity, flow rate and volume

- Interface: USB

- Data logger: 10 million measuring points

- LiPo battery

The Portable Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Portable Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Sensor for pipe diameter DN 300 ... 6000 mm

- Sensor dimensions: 91 x 52 x 44 mm

- for different media

- for different pipe materials

- measuring parameters: flow velocity, flow rate and volume

- Interface: USB

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery

The Clamp-on Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Clamp-on Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Sensor for pipe diameter DN 300 ... 6000 mm

- Sensor dimensions: 91 x 52 x 44 mm

- for different media

- for different pipe materials

- measuring parameters: flow velocity, flow rate and volume

- Interface: USB

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO Calibration Certifikcate

The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

Large sensor pair for pipe diameters DN 300 ... 6000 mm. This sensor pair is therefore suitable for particularly large pipes. The sensors for the ultrasonic flow meter can be attached with detachable cable ties. Thanks to the built-in magnets, the sensors can be attached to pipes with ferrous metal. The sensors have a dimension of 91 x 52 x 44 mm.

The current measuring transducer and millivolt signals offers a wide range of configuration options for converting signals. The output signal can be selected between 4 ... 20 mA and 0 ... 10 VDC can be selected. The current measuring transducer can be configured to measure load cells in the range 0 ... 5 mV to 0 ... 80 mV, also with bipolar ranges from ±5 mV to ±80 mV.

- Inputs from 0 ... 80 mV to ±80 mV

- Analog outputs 4 ... 20 mA and 0 ... 10 V

- Simple programming via keypad

- Top-hat rail mounting

- Power supply 18 ... 265 V AC/DC

The universal measuring transducer and millivolt signals offers a wide range of configuration options for converting signals. The output signal can be selected between 4 ... 20 mA and 0 ... 10 VDC can be selected. The universal measuring transducer can be configured to measure load cells in the range 0 ... 5 mV to 0 ... 80 mV, also with bipolar ranges from ±5 mV to ±80 mV.

- Inputs from 0 ... 80 mV to ±80 mV

- Analog outputs 4 ... 20 mA and 0 ... 10 V

- Simple programming via keypad

- Top-hat rail mounting

- Power supply 18 ... 265 V AC/DC

The voltage measuring transducer and millivolt signals offers a wide range of configuration options for converting signals. The output signal can be selected between 4 ... 20 mA and 0 ... 10 VDC can be selected. The voltage measuring transducer can be configured to measure load cells in the range 0 ... 5 mV to 0 ... 80 mV, also with bipolar ranges from ±5 mV to ±80 mV.

- Inputs from 0 ... 80 mV to ±80 mV

- Analog outputs 4 ... 20 mA and 0 ... 10 V

- Simple programming via keypad

- Top-hat rail mounting

- Power supply 18 ... 265 V AC/DC

The state-of-the-art particle counter dust measuring device  enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the particle counter dust measuring device  is done by an internal pump.

The state-of-the-art air sampler enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the air sampler is done by an internal pump.

The state-of-the-art particle counter enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the particle counter is done by an internal pump.

The state-of-the-art data logger enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the data logger is done by an internal pump.

The state-of-the-art dust monitor enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the dust monitor is done by an internal pump.

The state-of-the-art airborne particle-counting hygiene enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the airborne particle-counting hygiene is done by an internal pump.