The full HD inspection camera is used to zoom in on components, assemblies and many other items. The inspection camera is a reflected-light microscope with an enlargement of up to 206x
The material testing device sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this material testing device enables accurate verification of concrete piles, concrete beams, and other components. This innovative material testing device not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.
- Measurement range: -1677700 µs to +1677700 µs
- Resolution: 0.05 µs
- Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
The state-of-the-art air sampler enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the air sampler is done by an internal pump.
- Real-time measurement from 0.3 μm ... 10 μm
- Output in particles/28.3L or particles/m³
- Visual and audible alarm when threshold value is exceeded
- Modbus RTU and MQTT via RS485
- Temperature and humidity measurement - Real-time display of clean room class ISO 14644-1
The state-of-the-art data logger enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the data logger is done by an internal pump.
- Real-time measurement from 0.3 μm ... 10 μm
- Output in particles/28.3L or particles/m³
- Visual and audible alarm when threshold value is exceeded
- Modbus RTU and MQTT via RS485
- Temperature and humidity measurement - Real-time display of clean room class ISO 14644-1
The state-of-the-art dust monitor enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the dust monitor is done by an internal pump.
- Real-time measurement from 0.3 μm ... 10 μm
- Output in particles/28.3L or particles/m³
- Visual and audible alarm when threshold value is exceeded
- Modbus RTU and MQTT via RS485
- Temperature and humidity measurement - Real-time display of clean room class ISO 14644-1
The state-of-the-art particle counter enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the particle counter is done by an internal pump.
- Real-time measurement from 0.3 μm ... 10 μm
- Output in particles/28.3L or particles/m³
- Visual and audible alarm when threshold value is exceeded
- Modbus RTU and MQTT via RS485
- Temperature and humidity measurement - Real-time display of clean room class ISO 14644-1
The illuminometer is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The illuminometer guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.
- Measurement range: 0.00 ... 50000 cd/m² - Resolution: 0.01 cd/m² - Accuracy class: A in accordance with DIN 5032-7
The photometer is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The photometer guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.
- Measurement range: 0.00 ... 50000 cd/m² - Resolution: 0.01 cd/m² - Accuracy class: A in accordance with DIN 5032-7
The full HD microscope is used to zoom in on components, assemblies and many other items. The microscope is a reflected-light microscope with an enlargement of up to 206x.
The NDT test instrument sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this material testing device enables accurate verification of concrete piles, concrete beams, and other components. This innovative NDT test instrument not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.
- Measurement range: -1677700 µs to +1677700 µs
- Resolution: 0.05 µs
- Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
The ultrasonic tester / ultrasonic testing sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this ultrasonic tester / ultrasonic testing enables accurate verification of concrete piles, concrete beams, and other components. This innovative ultrasonic tester / ultrasonic testing not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.
- Measurement range: -1677700 µs to +1677700 µs
- Resolution: 0.05 µs
- Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
The environmental meter is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The environmental meter guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.
- Measurement range: 0.00 ... 50000 cd/m² - Resolution: 0.01 cd/m² - Accuracy class: A in accordance with DIN 5032-7
The lux meter is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The lux meter guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.
- Measurement range: 0.00 ... 50000 cd/m² - Resolution: 0.01 cd/m² - Accuracy class: A in accordance with DIN 5032-7
The environmental tester is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The environmental tester guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.
- Measurement range: 0.00 ... 50000 cd/m² - Resolution: 0.01 cd/m² - Accuracy class: A in accordance with DIN 5032-7
The photometer is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The photometer guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.
- Measurement range: 0.00 ... 50000 cd/m² - Resolution: 0.01 cd/m² - Accuracy class: A in accordance with DIN 5032-7
The state-of-the-art air quality particle counting enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the air quality particle counting is done by an internal pump.
- Real-time measurement from 0.3 μm ... 10 μm
- Output in particles/28.3L or particles/m³
- Visual and audible alarm when threshold value is exceeded
- Modbus RTU and MQTT via RS485
- Temperature and humidity measurement - Real-time display of clean room class ISO 14644-1
The luminance meter is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The luminance meter guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.
- Measurement range: 0.00 ... 50000 cd/m² - Resolution: 0.01 cd/m² - Accuracy class: A in accordance with DIN 5032-7
The state-of-the-art airborne particle-counting hygiene enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the airborne particle-counting hygiene is done by an internal pump.
- Real-time measurement from 0.3 μm ... 10 μm
- Output in particles/28.3L or particles/m³
- Visual and audible alarm when threshold value is exceeded
- Modbus RTU and MQTT via RS485
- Temperature and humidity measurement - Real-time display of clean room class ISO 14644-1