Voltmeter for measuring AC/DC current, AC voltage and resistance. This voltmeter is designed to indirectly detect AC/DC current and ohms. The voltmeter has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The voltmeter comes manufacturer calibrated and can optionally be certified according to ISO or standards.

- AC / DC current, voltage and resistance measurement
- 3 2/3-digit LCD display
- Power supply: 2 x 1.5V AAA battery
- Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in
- Incl. ISO Calibration Certificate

- AC / DC current, AC voltage and frequency measurement
- Integrated measuring point illumination
- Non-contact voltage tester
- Automatic range selection
- Forceps opening: 18 mm
- Automatic switch-off
- Incl. ISO calibration certificate

This voltmeter was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this voltmeter.

- AC/DC current, AC voltage and frequency measurement
- AC voltage test (contactless test):
   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
- DCA zero point function

Digital Clamp Meter for measuring AC/DC current, AC voltage and resistance. This clamp meter is designed to indirectly detect AC/DC current and ohms. The clamp has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The clamp meter comes manufacturer calibrated and can optionally be certified according to ISO or standards.

- AC / DC current, voltage and resistance measurement
- 3 2/3-digit LCD display
- Power supply: 2 x 1.5V AAA battery
- Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in

 

- Digital Multimeters up to 200 A
- Compact dimensions
- Robust plastic housing
- Multimeter functions
- Safety conditions: IEC1010-1 (2001)
                             CAT II 1000V
                             CAT III 600V

The Voltmeter tests 12V and 24V starter batteries. The voltmeter checks the condition of the car battery via the battery voltage in the charging cycle, when starting or when idling. 

 

- Measurement object:  12V / 24V starter batteries

- Battery standards: DIN, JIS, EN, SAE

- Power supply: 9 ... 35V DC via test voltage

Measuring function:
- DC voltage
- AC voltage
- Alternating current
- Resistance
- Capacity
- Frequency
- Type K temperature measurement
- Diode test
- Continuity test

Mini Voltmeter for measuring AC current, AC voltage, DC current and frequency.

- AC current (50/60 Hz): 200 A / 0.1 A or 100 mA / ±3.0% + 8 digits
- DC current: 200 A / 0.1 A or 100 mA / ±2.8% + 8 digits
- AC test voltage (without contact): 100 VAC to 600 VAC 50 / 60 Hz
- Frequency: 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

 

Measuring function
- DC DC
- AC voltage AC (TRMS)
- AC + DC TRMS voltage
- DC DC
- AC AC (TRMS)
- 4 ... 20-mA %
- AC AC / Rogowski coil
- Resistance
- Frequency
- Duty cycle
- Capacity
- Temperature / thermocouple

Measuring function:
- AC voltage: 750V
- DC voltage: 1000V
- Resistance: 4 MΩ
- Continuity test: 400 Ω
- Electrical safety: CAT III 600V

Measurement function:
- AC voltage
- DC voltage
- AC
- DC
- Resistance
- Diode measurement
- Continuity test

- Measuring range: 0 ... 12 A DC
- Three different test functions
- PC interface for data transfer
- Switchable graphic view
- Application, e.g. photovoltaic systems

The panel meter is a precision instrument of the highest standards. The panel meter is specifically designed for process monitoring and calibration. This panel meter is distinguished by its modular concept. This means that the actual sensor and the display can be separated. The pressure transmitter can be selected on site for different measuring ranges and connected to the display without tools.

- Max. 400 bar / 5801 psi
- Media: water, gases
- Pressure type: Absolute / Relative
- Diaphragm: stainless steel
- Accuracy: 0.05

This voltmeter was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this voltmeter.

- AC/DC current, AC voltage and frequency measurement
- AC voltage test (contactless test):
   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
- DCA zero point function

This voltmeter was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this voltmeter.

- AC/DC current, AC voltage and frequency measurement
- AC voltage test (contactless test):
   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
- DCA zero point function
- Incl. ISO Calibration Certificate