The carbon dioxide gas leak detector PCE-WMM 100 consists of a main unit and a remote display. The CO2 gas leak detector PCE-WMM 100 is used to measure carbon dioxide and oxygen in a fixed location. The gas leak detector PCE-WMM 100 has two relays that can be used to control alarm lights or sounders.

- Measuring range CO2: 0 .... 50000 ppm
- Measuring range O2: 0 ... 30 %
- Measuring range temperature: 0 ... 50 °C / 32 ... 122 °F
- Main and remote unit
- Alarm relay
- 4 ... 20 mA analog outputs
- Acoustic alarm

The Gasmaster GM-1 gas leak detector is a reliable, stationary warning device for gases. To connect a gas sensor, the gas measuring device is optionally supplied with a 4 - 20 mA or an mV signal input. The signal input has two alarm relays with which the gas leak detector can control signal lamps/horns or fans, for example.

- 1 input for a gas sensor
- Adaptation of gas sensors: O2, O3, CO, CO2, NH3, H2S
- Various combinations possible
- Event logging
- Large, backlit LCD display
- A/V alarm device max. 24V DC 650 mA
- Gas sensors optional

The chlorine gas leak detector is a highly accurate measuring device for measuring the chlorine concentration in our ambient air. Furthermore, sensor heads for other gases are also available for the chlorine gas leak detector, which are automatically recognized when they are plugged into the device.

- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- incl. sensor head for chlorine
- Different sensor heads selectable
- Digital output
- Data logger

The Xgard-1-H2 is a single-gas Gas Leak Detector used to warn for gases (Hydrogen, H₂, 0 ... 2000 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Hydrogen, H₂, 0 ... 2000 ppm)
- Additional display and alarm station
- ATEX or UL approval

- Measuring range CO2: 0 .... 50000 ppm
- Measuring range O2: 0 ... 30%
- Measuring range temperature: 0 ... 50°C / 32 ... 122°F
- Main and remote unit
- Alarm relay
- 4 ... 20-mA analog outputs
- Acoustic alarm
- Incl. ISO Calibration Certificate

Single-Gas Gas Leak Detector warning for gases (for Carbon Dioxide CO₂), / without display / with signal output for sensors in combination with a stationary equipment to detect gases (with ATEX approval).

- Stationary
- For Carbon Dioxide CO₂
- Additional display and alarm station
- ATEX approved

 

The Xgard-1-O3 is a single-gas Gas Leak Detector used to warn for gases (Ozone, O₃, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ozone, O₃, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-NH3 is a single-gas Gas Leak Detector used to warn for gases (Ammonia, NH₃, 0 ... 50 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ammonia, NH₃, 0 ... 50 ppm)
- Additional display and alarm station
- ATEX or UL approval

- Measuring range: 0 ... 4000 ppm
- Measuring range: 10 ... 90% rh
- Measuring range: 0 ... 50°C / 32 ... 122°F
- Memory on SD card
- 3 parameters of air quality
- CO2, air temperature and humidity

Measuring function
- PM2.5
- Humidity
- Temperature
- CO2
- Air pressure
- Memory: SD card max. 32 GB
- Ideal for workplace monitoring
- Alarm function
- Incl. ISO calibration certificate

With its hydrogen-selective sensor, the gas leak detector can detect the smallest leaks with a very low leak rate. Containers or lines that do not contain hydrogen can also be checked for leaks with the gas leak detector if they are filled with test gas containing hydrogen and then checked for leaks.

- High sensitivity: > 2 g / year
- Medium sensitivity: > 15 g / year
- Low sensitivity: > 30 g / year - bar display with traffic light function
- Three adjustable sensitivities
- Semi-rigid probe with a length of 40 cm / 15.7"
- Audible and visual alarm

Gas Leak Detector AQ-300 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Leak Detector can be equipped with four different heads that vary in their measurement range.

- High accuracy and functionality
- Battery operation
- Alarm function

 

 

The Xgard-1-NO2 is a single-gas gas sensor used to warn for gases (Nitrogen dioxide, NO₂, 0 ... 10 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Nitrogen dioxide, NO₂, 0 ... 10 ppm)
- Additional display and alarm station
- ATEX or UL approval

This gas detector Gas-Pro-3 can gauge with its sensors a maximum of five different gases. Because of this versatility, the gas detector Gas-Pro-3 is ideal for use in a variety of applications, such as: near canals, sewage treatment plants, drains, wastewater facilities, dumps/landfills, chemical/oil plants, shipping ports and more.

- Purpose: Personal protection
- Sensor type: CO / CO2 / H2S / O2 / CH4
- Memory: Yes
- Interface: USB
- Includes suction pump
- Other gas sensors available upon request. Please email jmu@pce-
  instruments.com (UK) or rhe@pce-instruments.com (US) for details

The Gas Leak Detector Gasman-NH3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.

- Non-rechargeable, 1-year battery
- For NH₃ (Ammonia Gas)
- Dust and water resistant - IP 65/67
- 0 ... 100 ppm