2 year Warranty
Verifiable waterproof Laboratory Balance in stainless steel with separate indicator (no corrosion). The multifunctional scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).
- Weighing capacity: 60 kg
- Readability: 20 g
- Calibration value: 20 g
- Weighing surface: 500 x 400 mm
- Verifiable M III
PCE-5000 is a portable hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in Non-destructive testing produces microscopic indentation.
- Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
- Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
- Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
- Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
- Memory size: 1,000 groups for measurement data and 20 groups for calibration data
- Different probe types (also automatic motorized probes) available
The USB Inventory Scale PCE-PB 150N is a versatile platform scale. The functions of the USB inventory scale are very extensive, but one function is particularly interesting for shipping. It is the bidirectional USB interface of the inventory scale that enables control by the PC.
- Weighing range: 150 kg / 330 lb
- Readability: 50 g
- Calibratable
- Bidirectional USB interface
- Piece counting function with reference number of pieces
- Multiple tare
- Stainless steel platform
Verifiable waterproof compact balance in stainless steel with separate indicator (no corrosion). The multifunctional compact calance is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).
- Weighing capacity: 30 kg
- Readability: 10 g
- Calibration value: 10 g
- Weighing surface: 400 x 500 mm
- Verifiable M III
The checkweighing scale is a versatile platform scale. The functions of the checkweighing scale are very extensive, but one function is particularly interesting for shipping. It is the bidirectional USB interface of the checkweighing scale that enables control by the PC.
- Weighing range: 150 kg / 330 lb
- Readability: 50 g
- Calibratable
- Bidirectional USB interface
- Piece counting function with reference number of pieces
- Multiple tare
- Stainless steel platform
The USB shipping scale PCE-PB 150N is a versatile platform scale. The functions of the USB shipping scale are very extensive, but one function is particularly interesting for shipping. It is the bidirectional USB interface of the shipping scale that enables control by the PC.
- Weighing range: 150 kg / 330 lb
- Readability: 50 g
- Calibratable
- Bidirectional USB interface
- Piece counting function with reference number of pieces
- Multiple tare
- Stainless steel platform
PCE-COM 20 is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.
- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration
PCE-MA 110 is an analytical balance or halogen moisture analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the moisture analyzer can be performed at any time using the automatic calibration function and the included 100 g weight.
- Weighing range: 0.01 g ... 110 g / 0.0035 ... 3.88 oz
- Weighing resolution or readability: 0.1 g / 10 mg
- Moisture content measuring range: 0 ... 100%
- Moisture content resolution or readability: 0.1%
- Adjustable drying time and temperature
- Memory stores up to 16 drying profiles
PCE-MA 110 is a laboratory balance or halogen moisture analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the moisture analyzer can be performed at any time using the automatic calibration function and the included 100 g weight.
- Weighing range: 0.01 g ... 110 g / 0.0035 ... 3.88 oz
- Weighing resolution or readability: 0.1 g / 10 mg
- Moisture content measuring range: 0 ... 100%
- Moisture content resolution or readability: 0.1%
- Adjustable drying time and temperature
- Memory stores up to 16 drying profiles
The USB Platform Scale PCE-PB 150N is a versatile platform scale. The functions of the USB platform scale are very extensive, but one function is particularly interesting for shipping. It is the bidirectional USB interface of the platform scale that enables control by the PC.
- Weighing range: 150 kg / 330 lb
- Readability: 50 g
- Calibratable
- Bidirectional USB interface
- Piece counting function with reference number of pieces
- Multiple tare
- Stainless steel platform