The ultrasonic level indicator is the ideal measuring device to determine the filling level of a silo. Thanks to the 4 ... 20 mA output signal, the ultrasonic level indicator can also be connected to the operational process control.

- Measuring range: 0 ... 10 m / 0 ... 32.8 ft
- Accuracy: 0.5%
- Resolution: 0.001 m
- With display for setting and reading
- Stable M60 connection thread
- incl. external digital display PCE-N24S:
- Voltage supply: selectable
- Input signal: selectable
- Display: 4 digits, red
- Digit height: 20 mm / 0.78"

PCE-VDR 10 is a single-axis vibration recorder or monitor with real-time measurement and data logging capabilities. This vibration recorder records acceleration (m/s, g, ft/s) as well as speed (mm/s, cm/s, in/s) measurements and saves the measured data to an included SD card memory.

- Acceleration measuring range:
  0.5 ... 199.9 m/s, 0.05 ... 20.39 g, 2 ... 656 ft/s
- Speed measuring range:
  0.5 ... 199.9 mm/s, 0.05 ... 19.99 cm/s, 0.02 ... 7.87 in/s
- Frequency range: 10 ... 1000 Hz
- Analog output: 4 ... 20 mA
- RS-232 and USB interface

 

With the table-top redox meter it is possible to carry out quick and precise analysis of the pH concentration of liquid samples. For example, with the redox meter it is possible to check alkaline solutions, water, wine, milk and many other liquids for the pH content.

- pH measuring range: -2.000 ... +19.999 pH
- Resolution: 0.1 / 0.01 pH
- Measuring range mV: -1999.9 ... +1999.9 mV
- Resolution: 1 mV
- Temperature measuring range: -10 ... +110 °C / 14 ... 230 °F
- Resolution: 0.1 °C
- USB and Bluetooth interface
- Memory for 300 measured values
- Live viewing software
- 3 point calibration

With the table-top environmental tester it is possible to carry out quick and precise analysis of the pH concentration of liquid samples. For example, with the environmental tester it is possible to check alkaline solutions, water, wine, milk and many other liquids for the pH content.

- pH measuring range: -2.000 ... +19.999 pH
- Resolution: 0.1 / 0.01 pH
- Measuring range mV: -1999.9 ... +1999.9 mV
- Resolution: 1 mV
- Temperature measuring range: -10 ... +110 °C / 14 ... 230 °F
- Resolution: 0.1 °C
- USB and Bluetooth interface
- Memory for 300 measured values
- Live viewing software
- 3 point calibration

- Measuring range: 0 ... 10 m / 0 ... 32.8 ft
- Accuracy: 0.5%
- Resolution: 0.001 m
- With display for setting and reading
- Stable M60 connection thread

- Measuring range: 0 ... 10 m / 0 ... 32.8 ft
- Accuracy: 0.5%
- Resolution: 0.001 m
- With display for setting and reading
- Stable M60 connection thread

The PCE-DDO 10 hardness tester is an ergonomic device to check Shore O hardness in gum. It has been designed with a high quality. The PCE-DDO 10 hardness tester is mainly used for soft gums. If the material thickness is not enough, it should be tightened on the back with the same material in order to increase its thickness.

- Handheld device
- For Shore O measurements
- Single and Serial-Measurements
- Data transfer to PC

 

The pressure / fill level sensor is based on a ceramic measuring cell. This level sensor was developed for the measurement of levels in waste water, polluted and highly viscous media. As a special feature of this level sensor, the probe and cable part can be separated from one another.

- Nominal pressures up to 100 mH2O
- Accuracy ± 0.35% of the measuring range
- 39.5 mm diameter
- Suitable for sewage, fuels and water
- Ceramic sensor
- Different configurations possible

The PCE-DDO 10 shore durometer is an ergonomic device to check Shore hardness in gum. It has been designed with a high quality. The PCE-DDO 10 durometer is mainly used for soft gums. If the material thickness is not enough, it should be tightened on the back with the same material in order to increase its thickness.

- Handheld device
- For Shore O measurements
- Single and Serial-Measurements
- Data transfer to PC