Colorimeter PCE-CSM 20
£ 4,695.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
PCE-CSM 20 is a handheld colorimeter used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the colorimeter offers a long battery life, a 4-color lamp and an easy-to-use portable design. The colorimeter covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

- Measuring geometry: 8° / d
- Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
- USB cable and software for data transfer
- 2,000 reference standard memory, 20,000 sample memory
- Light source: D65, A, C, D50
- Color ranges: CIE L*a*b, XYZ, Yxy, LCh, CIE LUV, Hunter L*A*B 
Wind Measurer PCE-WSAC 50W 24
£ 1,059.00
Price excl. VAT &. delivery
2 year Warranty
The Wind Measurer PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the Wind Measurer means stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analog output
- Supply voltage: 24V DC
- Ambient temperature -20 ... 70°C / -4 ... 158°F
- units adjustable: km / h, mph, m / s
HVAC Meter PCE-PA 8300-1
£ 2,661.00
Price excl. VAT &. delivery
2 year Warranty

The easy-to-use PCE-PA 8300 HVAC Meter is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:


- Voltage measurement range of 10 V ... 600 V AC
- Current measurement range of (Set 1) 20 A ... 1200 A AC
- Performance measurement range of 0 kW ... 9.999 MW (VA/VAR)
- Simultaneous display of harmonics and waveform
- Graphic Phasor diagram
- Captures transients including dip, swell, and outage

Wind Measurer Station PCE-FWS 20N-2
£ 241.00
Price excl. VAT &. delivery
2 year Warranty

This wind measurer station with outside sensor is a real all-rounder. The wireless wind measurer station with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless wind measurer station and outside sensors. The weather data of the wind measurer station with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.


- 3 displays
- Indoor temperature in Celsius or Fahrenheit
- Outside temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor air humidity
- Air pressure gauge in inHg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indication in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
- Wind speed in mph, km/h, m/s, knots ...
- Wind direction indicator
- Wind chill temperature gauge
- Weather forecast, trend indicator, storm warning
- and much more...

HVAC Meter PCE-PIC 20
£ 1,765.00
Price excl. VAT &. delivery
2 year Warranty
The HVAC meter PCE-PIC 20 is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The HVAC meter PCE-PIC 20 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable. 

- Cable diameter / head diameter: 23 mm / 0.9 in
- 20 m / 66 ft push cable
- Electronic meter counting
- Battery and mains operation
- Waterproof up to 20 m / 66 ft
Power Meter PCE-PA 8300-1
£ 2,661.00
Price excl. VAT &. delivery
2 year Warranty

The easy-to-use PCE-PA 8300 Power Meter is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:


- Voltage measurement range of 10 V ... 600 V AC
- Current measurement range of (Set 1) 20 A ... 1200 A AC
- Performance measurement range of 0 kW ... 9.999 MW (VA/VAR)
- Simultaneous display of harmonics and waveform
- Graphic Phasor diagram
- Captures transients including dip, swell, and outage

Clamp Meter PCE-PA 8300-1
£ 2,661.00
Price excl. VAT &. delivery
2 year Warranty

The easy-to-use PCE-PA 8300 Clamp Meter is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:


- Voltage measurement range of 10 V ... 600 V AC
- Current measurement range of (Set 1) 20 A ... 1200 A AC
- Performance measurement range of 0 kW ... 9.999 MW (VA/VAR)
- Simultaneous display of harmonics and waveform
- Graphic Phasor diagram
- Captures transients including dip, swell, and outage

HVAC Meter PCE-VE 1500-22190
£ 20,670.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.

- Diameter: Ø2.2mm / 0.08"
- Cable length: 1m / 3.2 ft
- Camera direction: 90°
- Resolution: 160,000 pixels
- Focusing range: 5 ... 50 mm / 0.19 ... 1.96"
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission
Wind Speed Meter PCE-ADL 11
£ 178.00
Price excl. VAT &. delivery
2 year Warranty
The wind speed meter PCE-ADL 11 is a data logger for wind speeds. The configuration on the wind measuring device is carried out via the supplied software and provides multiple settings for measurement. You can buy the wind speed meter PCE-ADL 11 here in our online shop.

- Measuring range: 1.2 ... 30.0 m (3.9 ... 98.4 ft) / sec.
- Resolution: 0.01 m (0.03 ft) / s
- Measurement accuracy m / s: ± (3% + 0.20 m (0.7 ft) / s)
- Units selectable: km / h, knots, miles / h, ft / min
- Memory: for up to 60000 readings
- PC software
Wind Measurer PCE-WSAC 50W 230
£ 1,059.00
Price excl. VAT &. delivery
2 year Warranty
The wind measurer PCE-WSAC 50W 230 is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. Due to the high measuring range of up to 50 m / s of the wind measurer, stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
Vibration Meter PCE-VM 20-ICA incl. ISO Calibration Certificate
£ 1,833.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The vibration meter PCE-VM 20-ICA is a compact device for direct evaluation of the vibration behavior of a machine. The vibration meter can measure and display various vibration parameters, such as vibration acceleration, vibration velocity or vibration displacement.

- Vibration acceleration: 0 ... 200 m/s², RMS and peak-peak
- Vibration speed: 0 ... 200 mm/s, RMS
- Vibration distance: 0 ... 2000 μm, peak-peak
- Real-time FFT analysis
- Direct evaluation according to DIN ISO 10816
- incl. ISO Calibration Certificate
HVAC Meter PCE-830-1
£ 2,127.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-830 HVAC Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This HVAC Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm / 1.1 in diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 mm x 62 mm x 36 mm / 8.2 in x 2.4 in x 1.4 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values (single phase)

Wind Speed Meter PCE-FST-200-201-I
£ 187.00
Price excl. VAT &. delivery
2 year Warranty

The Wind Speed Meter is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form.


- Output signal: 4 … 20-mA
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0.5 m/s … 50 m/s (1.1 ... 111.8 mph)

HVAC Meter PCE-VE 1500-38209
£ 20,670.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.

- Endoscope cable length: approx. 2 m / 6.5 ft
- Diameter: 3.8mm / 0.15"
- Camera resolution 160,000 pixels each
- Viewing angle front camera 120°, side camera 90°
- Focusing distance 5 … 50 mm / 0.19 ... 1.96" each
- Camera head length: 42 mm / 1.6"
- Bending radius at 90° 35 mm / 1.3"
- Live images from both cameras side by side
- 7" touch screen for easy operation
- Replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission
Clamp Meter PCE-830-1
£ 2,127.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-830 Clamp Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This Clamp Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm / 1.1 in diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 mm x 62 mm x 36 mm / 8.2 in x 2.4 in x 1.4 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values (single phase)

Climate Meter PCE-FWS 20N-1
£ 171.00
Price excl. VAT &. delivery
2 year Warranty

This climate meter with outside sensor is a real all-rounder. The wireless climate meter with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless climate meter and outside sensors. The weather data of the climate meter with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.


- 2 displays
- Indoor temperature in Celsius or Fahrenheit
- Outside temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor air humidity
- Air pressure gauge in inHg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indication in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
- Wind speed in mph, km / h, m / s, knots ...
- Wind direction indicator
- Wind chill temperature gauge
- Weather forecast, trend indicator, storm warning
- and much more...

Environmental Meter PCE-FWS 20N-1
£ 171.00
Price excl. VAT &. delivery
2 year Warranty

This environmental meter with outside sensor is a real all-rounder. The wireless environmental meter with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless environmental meter and outside sensors. The weather data of the environmental meter with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.


- 2 displays
- Indoor temperature in Celsius or Fahrenheit
- Outside temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor air humidity
- Air pressure gauge in inHg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indication in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
- Wind speed in mph, km / h, m / s, knots ...
- Wind direction indicator
- Wind chill temperature gauge
- Weather forecast, trend indicator, storm warning
- and much more...

Temperature Meter Station PCE-FWS 20N-1
£ 171.00
Price excl. VAT &. delivery
2 year Warranty

This temperature meter station with outside sensor is a real all-rounder. The wireless temperature meter station with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless temperature meter station and outside sensors. The weather data of the temperature meter station with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.


- 2 displays
- Indoor temperature in Celsius or Fahrenheit
- Outside temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor air humidity
- Air pressure gauge in inHg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indication in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
- Wind speed in mph, km / h, m / s, knots ...
- Wind direction indicator
- Wind chill temperature gauge
- Weather forecast, trend indicator, storm warning
- and much more...