With this condition monitoring industrial borescope, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the industrial borescope consists of braided tungsten.

- Diameter: Ø2.8mm / 0.11"
- Cable length: 2m / 6.5 ft
- Camera direction: 0°
- Resolution: 160,000 pixels
- Focusing range: 5 ... 50 mm / 0.19 ... 1.96"
- 7" touch screen for easy operation
- Replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

With this condition monitoring industrial borescope, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the condition monitoring industrial borescope consists of braided tungsten.

- Diameter: Ø6mm / 0.23"
- Cable length: 5m / 16.4 ft
- Camera direction: 0°
- Resolution: 1MP
- Focusing range: 5 ... 50 mm / 0.19 ... 1.96"
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

The stainless steel industrial scale is made entirely of high quality, acid resistant stainless steel. The weighing cells installed in the stainless steel industrial scale have a protection class of IP68.

 

- Weighing range : 1500 kg
- Readability : 0.5 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III

The industrial scale is made entirely of high quality, acid resistant stainless steel. The weighing cells installed in the stainless steel industrial scale have a protection class of IP68.

 

- Weighing range : 600 kg
- Readability : 0.2 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III

- Measuring width: 0 ... 999,999 RLU
- Fast hygiene tests in just 10 seconds
- USB and Bluetooth printer interface
- Automatic calibration
- For HACCP implementation
- Data storage
- Incl. 100 Test tubes (swabs) for surfaces
- Incl. 100 Test tubes (swabs) for water

With this condition monitoring industrial borescope, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the industrial borescope consists of braided tungsten.

- Endoscope cable length: approx. 2 m / 6.5 ft
- Diameter: 3.8mm / 0.15"
- Front camera with resolution: 1,000,000 pixels
- Front camera viewing angle 120°
- Focus 10 … 100 mm / 0.39 … 3.9"
- Movable camera head 46 mm / 1.8" long
- Bending radius approx. 35 mm / 1.3" at 90°
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

- Measuring width: 0 ... 999,999 RLU
- Fast hygiene tests in just 10 seconds
- USB and Bluetooth printer interface
- Automatic calibration
- For HACCP implementation
- Data storage
- Incl. 100 Test tubes (swabs) for surfaces
- Incl. 100 Test tubes (swabs) for water

The microprocessor Food Thermometer is a highly accurate 1-channel temperature measuring device. The microprocessor Food Thermometer is ideally suited to operate various PT-100 sensors and thus for condition monitoring. By using four-wire technology, the response time is particularly fast and accurate.

- Measuring range: -100 ... +400 °C / -148 ... 752 °F
- Accuracy: ± 0.05% + 0.1 °C / 0.18 °F (at 18 to 28 °C / 64.4 ... 82.4 °F) device only
- Resolution: 0.01 °C / 0.018 °F
- PT-100 sensor

PCE-WM1 is a multi-function temperature meter used to determine relative humidity (% RH), absolute humidity (g/m³), air temperature, dew-point temperature and surface temperature (°C). This Metric-only measuring instrument comes complete with an external sensor probe for taking the surface temperature of different materials.

- Temperature range: -20 ... 80°C 
- Relative humidity range: 10 ... 95% RH
- Absolute humidity range: 0.5 ... 74.4 g/m³

 

The stainless steel U-shaped industrial scales are certifiable scales supplied in calibrated form. The dimensions of the stainless steel U-shaped industrial scales are tailored to a range of EU sizes.

- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III
- Stainless steel IP68 - IP65

 

- Measuring range PCE-PH20M: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Including infrared thermometer PCE-IR 80
- Measuring range PCE-IR 80: -35 ... 330°C / -31 ... 626°F
- Calibration: automatic, pH 4, 7, or 10
- Food: meat etc.

The two-way optics is a great advantage of the PCE-VE 1034N-F industrial borescope. There is easy control of the camera head with the PCE-VE 1034N-F industrial borescope. The PCE-VE 1034N-F industrial borescope allows you to capture images and videos, and the videos are also stored with an audio recording. 

- Cable length: 3 m / 9.84 ft
- Head: 2 way
- Diameter: 4.5 mm / 0.18 in
- Resolution: 640 x 480 Pixel
- Storage of pictures and videos
- 8 GB memory card incl.
- LED lighting

- Weighing range: 0 ... 3000 kg
- Readability: 1 kg
- Calibration value: 1 kg
- Verifiable M III
- Stainless steel IP68 - IP65

The stainless steel industrial scale is made entirely of high quality, acid resistant stainless steel. The weighing cells installed in the stainless steel industrial scale have a protection class of IP68.

 

- Weighing range : 300 kg
- Readability : 0.1 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III