A gloss meter is a tester for determining surface gloss. Thereby, with the glossmeter, spectral reflections of a light beam that hits the surface, are measured. The touch screen allows for easy navigation.

- Measuring geometries: 20° / 60° / 85°
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm

The PCE-288-R Water Analysis Meter or Redox Meter is a very easy to use meter to measure mV / pH / ºC. In the PCE-228-R Redox Meter, values can be directly stored in the SD memory card (Excel format) or can be directly transferred in real time to a PC or laptop by means of the RS-232 interface.

- Good quality at an affordable price
- SD memory card (1 ... 16 GB)
- Values are directly stored in Excel format in the SD memory card (any
  additional software is required)
- RS-232 interface for real-time data transfer

 

The configurable universal measuring transducer for electrical signals is a signal doubler and signal converter for process signals. A 4 ... 20-mA and 0 ... 10V DC signal can be applied to the input. The universal measuring transducer has 2 outputs, whereby output 1 can be set to 4 ... 20-mA and output 2 to 4 ... 20-mA or 0 ... 10V DC. It also has quadruple isolation between power supply, input signal, output 1 and output 2.

- Duplicates analog signals
- 4 ... 20-mA and 0 ... 10V
- Quick configuration using 2 buttons
- DIN rail mounting
- Inputs and outputs galvanically isolated
- Power supply 24 ... 250V AC/DC

A gloss meter is a tester for determining surface gloss. Thereby, with the gloss meter, spectral reflections of a light beam that hits the surface, are measured. The touch screen allows for easy navigation.

- Measuring geometries: 20° / 60° / 85°
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm

A gloss meter is a tester for determining surface gloss. Thereby, with the glossmeter, spectral reflections of a light beam that hits the surface, are measured. The touch screen allows for easy navigation.

- Measuring geometries: 20° / 60° / 85°
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm

The air quality carbon dioxide meter PCE-WMM 100 consists of a main unit and a remote display. The CO2 air quality meter PCE-WMM 100 is used to measure carbon dioxide and oxygen in a fixed location. The air quality carbon dioxide meter PCE-WMM 100 has two relays that can be used to control alarm lights or sounders.

- Measuring range CO2: 0 .... 50000 ppm
- Measuring range O2: 0 ... 30 %
- Measuring range temperature: 0 ... 50 °C / 32 ... 122 °F
- Main and remote unit
- Alarm relay
- 4 ... 20 mA analog outputs
- Acoustic alarm

A gloss meter is a tester for determining surface gloss. Thereby, with the glossmeter, spectral reflections of a light beam that hits the surface, are measured. The touch screen allows for easy navigation.

- Measuring geometries: 20° / 60° / 85°
- Measuring range: 20° : 0 ... 1000 GU / 60° : 0 ... 1000 GU / 85° : 0 ... 160 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm

 

The Air Quality Carbon Dioxide Meter PCE-WMM 100-ICA consists of a main unit and a remote display. The air quality carbon dioxide meter is used to measure carbon dioxide and oxygen in a fixed location. The air quality carbon dioxide meter has two relays that can be used to control alarm lights or sounders.

- Measuring range CO2: 0 .... 50000 ppm
- Measuring range O2: 0 ... 30 %
- Measuring range temperature: 0 ... 50 °C / 32 ... 122 °F
- Main and remote unit
- Alarm relay
- 4 ... 20 mA analog outputs
- Acoustic alarm
- incl. ISO Calibration Certificate

This Formaldehyde Meter HFX205-100 is designed to detect formaldehyde in air. The Formaldehyde Meter HFX205-100 shows the formaldehyde-concentration on site and thereby avoids time-consuming and expensive analysis in laboratories. The Formaldehyde Meter HFX205-100 runs with help of an electromechanical sensor and is designed to determine the current permitted limit. A measurement can be accomplished in less than 30 seconds.

- Range Formaldehyde: 0…100 ppm
- Short reaction time
- Real-time display
- Manual and auto data storage
- High-speed USB
- Software for Online Data transfer

This Gas Detector is designed to detect formaldehyde in air. The Gas Detector shows the formaldehyde-concentration on site and thereby avoids time-consuming and expensive analysis in laboratories. The Gas Detector runs with help of an electromechanical sensor and is designed to determine the current permitted limit. A measurement can be accomplished in less than 30 seconds.

- Range Formaldehyde: 0…100 ppm
- Short reaction time
- Real-time display
- Manual and auto data storage
- High-speed USB
- Software for Online Data transfer

Measurement functions:
- Process flow
- mV
- Process voltage
- Resistance
- Autotune PID
- Memory for several PID parameters
- RS485 Modbus interface

A gloss meter is a tester for determining surface gloss. Thereby, with the glossmeter, spectral reflections of a light beam that hits the surface, are measured. The touch screen allows for easy navigation.

- Measuring geometries: 20° / 60° / 85°
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

The oxygen meter PCE-WMM 100 consists of a main unit and a remote display. The CO2 and oxygen meter PCE-WMM 100 is used to measure carbon dioxide and oxygen in a fixed location. The oxygen meter PCE-WMM 100 has two relays that can be used to control alarm lights or sounders.

- Measuring range CO2: 0 .... 50000 ppm
- Measuring range O2: 0 ... 30 %
- Measuring range temperature: 0 ... 50 °C / 32 ... 122 °F
- Main and remote unit
- Alarm relay
- 4 ... 20 mA analog outputs
- Acoustic alarm

The CO2 analyser PCE-WMM 100 consists of a main unit and a remote display. The CO2 analyser PCE-WMM 100 is used to measure carbon dioxide and oxygen in a fixed location. The CO2 analyser PCE-WMM 100 has two relays that can be used to control alarm lights or sounders.

- Measuring range CO2: 0 .... 50000 ppm
- Measuring range O2: 0 ... 30 %
- Measuring range temperature: 0 ... 50 °C / 32 ... 122 °F
- Main and remote unit
- Alarm relay
- 4 ... 20 mA analog outputs
- Acoustic alarm

The gas detector PCE-WMM 100 consists of a main unit and a remote display. The CO2 gas detector is used to measure carbon dioxide and oxygen in a fixed location. The gas detector has two relays that can be used to control alarm lights or sounders.

- Measuring range CO2: 0 .... 50000 ppm
- Measuring range O2: 0 ... 30 %
- Measuring range temperature: 0 ... 50 °C / 32 ... 122 °F
- Main and remote unit
- Alarm relay
- 4 ... 20 mA analog outputs
- Acoustic alarm