The PCE-DDD 10 shore hardness tester and durometer is an ergonomic device to check Shore D hardness in materials such as hard rubber and thermoplastic. It has been designed with a very high quality.  The durometer (as all test instruments) comes manufacturer calibrated and can additionally be lab certified to ISO standards.

- Handheld device
- For Shore D measurements
- Single and Serial Measurements
- Data transfer to PC

 

The force gage is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension force gage. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 10,000 kg / 100 kN / 22,046 lb
- Resolution: 5 kg / 50 N / 11 lb
- Minimum load: 100 kg / 220 lb
- Supplied with remote control indicator

The tension dynamometer is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension dynamometer. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 10,000 kg / 100 kN / 22,046 lb
- Resolution: 5 kg / 50 N / 11 lb
- Minimum load: 100 kg / 220 lb
- Supplied with remote control indicator

Force test stand
The motorised force test stand can be used for vertical tensile and compressive force tests. All force gauges from PCE Instruments can be mounted on the force test stand (if necessary with an adapter plate). The force test stand can withstand a maximum load of 500 N.

- Force range: max. 500 N / 50 kg / 110 lb
- Travel path: max. 270 mm / 10.6"
- Feed speed: 1 ... 500 mm/min
- Manual or automatic procedure

Force gauge
Digital force gauge for tensile force measurement and compressive force measurement up to 500 N. The digital force gauge is for precise measurements with a resolution of 0.1 N.

- Measuring range: 0 ... 500 N
- Accuracy: ± 0.1% of the measuring range
- Tensile and compressive force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Memory for 100 measurements
- 220V AC ONLY

The two-way optics is a great advantage of the PCE-VE 1014N-F NDT test instrument or inspection camera. There is easy control of the camera head with the NDT test instrument. The NDT test instrument allows you to capture images and videos, and the videos are also stored with an audio recording. 

- Cable length: 1.5 m / 4.9 ft
- Camera head: 2-way
- Diameter: 4.5 mm / 0.18 in
- Resolution: 640 x 480 Pixel
- Storage of pictures and videos
- 8 GB memory card incl.
- LED lighting

The PCE-DDA 10 shore hardness tester is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a very high quality. The PCE-DDA 10 hardness tester is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. It has a reading accuracy of 0.1 hardness units.

- Handheld device
- For Shore A measurements
- Single and Serial Measurements
- Data transfer to pc
- Incl. ISO Calibration Certificate

The NDT test instrument PCE-VE 355N3 is a two-way articulating videoscope, inspection camera, industrial endoscope or borescope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.

- 2-way camera probe
- Diameter camera head: Ø 4.5mm / 0.18"
- Interface: Mini-USB 1.1 und AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 3 m /  9ft 10"

The simple design and an absolutely straightforward operation make it possible for the practitioner to use the force gage as an instrument for daily adhesion tests. Using adhesive with rapid curing, the tests can be performed by the user in the shortest possible time.

- Breakout force: 200 kg
- Diameter of base dolly, mm: 15.1 (№ 1) and 19.5 (№ 2)
- Specific breakout force, MPa: Dolly №1 up to 10 MPa (100) Dolly
  №2 up to 6 MPa (60)

 

Force test stand
The motorised force test stand can be used for vertical tensile and compressive force tests. All force gauges from PCE Instruments can be mounted on the force test stand (if necessary with an adapter plate). The force test stand can withstand a maximum load of 500 N.

- Force range: max. 500 N / 50 kg / 110 lb
- Travel path: max. 270 mm / 10.6"
- Feed speed: 1 ... 500 mm/min
- Manual or automatic procedure

Force gage
Digital force gage for tensile force measurement and compressive force measurement up to 500 N. The digital force gage is for precise measurements with a resolution of 0.1 N.

- Measuring range: 0 ... 500 N
- Accuracy: ± 0.1% of the measuring range
- Tensile and compressive force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Memory for 100 measurements
- 220V AC ONLY

The Surface Testing - Inspection Camera PCE-VE 355N3 is a two-way articulating industrial endoscope, borescope or videoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.

- 2-way camera probe
- Diameter camera head: Ø 4.5mm / 0.18"
- Interface: Mini-USB 1.1 und AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 3 m /  9ft 10"

The PCE-DDD 10 shore hardness tester is an ergonomic device to check Shore D hardness in materials such as hard rubber and thermoplastic. It has been designed with a very high quality.

- Handheld device
- For Shore D measurements
- Single and Serial measurements
- Data transfer to PC
- Incl. ISO Calibration Certificate

Our motorized tension dynamometer test stand can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The motorized tension dynamometer test stand lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized tension dynamometer test stand offers the operator the most precise equality of test bench and sample.

- Force range: max. 5000 N / 500 kg / 1100 lbs
- Travel: max. 300 mm / 11.8"
- Feed speed: 30 ... 230 mm/min / 1.18 ... 9.05 in/min
- Manual or automatic procedure
- incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"

*** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

The force gage is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension force gage. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 10,000 kg / 100 kN / 22,046 lb
- Resolution: 5 kg / 50 N / 11 lb
- Minimum load: 100 kg / 220 lb
- Supplied with remote control indicator
- incl. ISO Calibration Certificate

The industrial borescope has a 1.5 m / 4.9 ft long endoscope cable. With a diameter of only 4 mm, cavities with the smallest access can be viewed with the help of this industrial borescope. The camera head of this industrial borescope can move freely in 4 directions.

- Cable / head diameter: 4 mm
- Direction of movement camera head: 4-way
- Camera head length: 18 mm
- Bending radius: 8 mm
- 1.5 m / 4.9 ft endoscope cable
- 5" monitor
- Image and video memory
- IP67 camera cable
- 1,000,000 pixel image resolution

The simple design and an absolutely straightforward operation make it possible for the practitioner to use the adhesion tester as an instrument for daily adhesion tests. Using adhesive with rapid curing, the tests can be performed by the user in the shortest possible time.

- Breakout force: 200 kg
- Diameter of base dolly, mm: 15.1 (№ 1) and 19.5 (№ 2)
- Specific breakout force, MPa: Dolly №1 up to 10 MPa (100) Dolly
  №2 up to 6 MPa (60)

 

The tension dynamometer is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension dynamometer. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 10,000 kg / 100 kN / 22,046 lb
- Resolution: 5 kg / 50 N / 11 lb
- Minimum load: 100 kg / 220 lb
- Supplied with remote control indicator
- incl. ISO Calibration Certificate

Our motorized force gauge can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The motorized force gauge lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized force gauge offers the operator the most precise equality of test bench and sample.

- Force range: max. 5000 N / 500 kg / 1100 lbs
- Travel: max. 300 mm / 11.8"
- Feed speed: 30 ... 230 mm/min / 1.18 ... 9.05 in/min
- Manual or automatic procedure
- incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"

*** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***