- Function: time measurement
- Input signal: NPN, PNP
- Display range: -199,999 ... 999,999
- Number of outputs: 3
- Voltage supply: 85 ... 265 V AC / 120 ... 370 V DC

The configurable universal measuring transducer for electrical signals is a signal doubler and signal converter for process signals. A 4 ... 20-mA and 0 ... 10V DC signal can be applied to the input. The universal measuring transducer has 2 outputs, whereby output 1 can be set to 4 ... 20-mA and output 2 to 4 ... 20-mA or 0 ... 10V DC. It also has quadruple isolation between power supply, input signal, output 1 and output 2.

- Duplicates analog signals
- 4 ... 20-mA and 0 ... 10V
- Quick configuration using 2 buttons
- DIN rail mounting
- Inputs and outputs galvanically isolated
- Power supply 24 ... 250V AC/DC

The universal signal converter has an adjustable measuring range of 0… 600 V AC/DC and can therefore measure a wide variety of voltages. For example, it is possible to connect the transmitter to the supply line in order to monitor the applied voltage.

- Measuring range 0 ... 600 V AC/DC
- Active and passive output signal
- Display and keypad for configuration
- Frequency measurement
- DIN rail mounting
- Display

The process controller / temperature controller is a compact PID controller which can be used in a wide range of applications. On the input side, this temperature controller processes the widely used process signals 4 ... 20 mA and 0 ... 10 V as well as resistance sensors and thermocouples. The temperature controller can be used very flexibly, since different operating modes are available. Besides the simple on / off control with adjustable hysteresis, the digital controller also offers various combinations of the PID control. Thanks to the SMART PID control, this temperature controller achieves the setpoint value very quickly and with a slight overshoot.

- Two 4-digit LED displays
- Two output relays
- Front protected to IP65
- Analogue universal input

Function
- Speed: 50 ... 35000 RPM / FPM
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
- With trigger input

Function
- Speed: 50 ... 35000 RPM / FPM
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
- With trigger input

Measurement functions:
- Process flow
- mV
- Process voltage
- Resistance
- Autotune PID
- Memory for several PID parameters
- RS485 Modbus interface
- 2 measuring inputs

- Flash frequency: 50 ... 35000 FPM
- Accuracy: ±(0.05% of measured value + 2 Dgt)
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
- with trigger input

The PCE-A-315 inline or in-process moisture sensor provides exceptionally accurate grain moisture measurement in real time. The PCE-A-315 in-process moisture meter uses low-power microwaves to penetrate the surface every 0.2 second and obtain interior moisture readings without causing any damage. An integrated temperature probe ensures the readings are accurate from 5°C to 55°C / 41°F to 131°F. Suitable for the continuous monitoring of moisture in corn, soybeans, wheat, rice, sorghum, barley, oats, rye, hops, green coffee, cocoa beans, oil seeds, flax seeds, sunflower seeds, poppy seeds, pumpkin seeds, spelt seeds, buckwheat, sesame, peas, fava beans, scarlet runner beans, triticale, amaranth and jatropha.

- Boasts a measurement range of 5% to 40% for moisture content during
  continuous mass flow with an error of just ±0.5% from 5% to 18% grain
  moisture
- Lowers energy costs by enabling shorter drying times and reduces labor costs
  by automating the moisture monitoring process
- Provides nearly maintenance-free operation, delivering consistently accurate
  moisture readings over time
- Analog output of 4 to 20 mA can be converted to digital for dryer control

 

- Measuring range: 0 ... 14 pH
- Measuring range: 0 ... 65°C / 32 ... 149°F
- Large LED display
- 2 control relays for pH and temperature
- Connection via BNC and screw contacts
- For water treatment, electroplating ...
- Sensors selectable

- Over 100 combinations pre-selected
- Converts analogue input range
- Completely galvanic isolation
- Power supply 18 ... 265V AC / DC

Measurement functions:
- Process flow
- mV
- Process voltage
- Resistance
- Autotune PID
- Memory for several PID parameters
- RS485 Modbus interface

The digital universal indicator is used for processing 4...20 mA and 0...20 mA signals. Many measuring transducers and sensors use this type of output, which makes the digital universal indicator suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the digital universal indicator.

- Input (selectable): 0...20 mA, 4...20 mA, ± 20 mA
- Accuracy: ± (0.2 % FS + 1 dgt.)
- Two open collector outputs
- 24 V power supply sytem for sensors and transducers

Function
- Speed: 50 ... 35000 RPM / FPM
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
- With trigger input

Function
- Speed: 50 ... 35000 RPM / FPM
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
- With trigger input

PCE-WSAC 50 is an Wind Alarm Controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This Wind Speed Alarm allows measurement of the slightest of wind movements. PCE-WSAC 50 is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.

- Pre-alarm and full alarm with visual and audible warnings
- Optional RS-485 modbus interface for data communication
- Measuring range: 0 ... 50 m/s or 0 ... 110 mph
- Incl. ISO calibration certificate