Products for 'Ultrasonic Thickness Tester PCE USC 20 '

Ultrasonic Wall Thickness Gauges PCE-TG 150A

£ 468.00

Price excl. VAT &. delivery
2 year Warranty

The ultrasonic wall thickness gauges can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the ultrasonic wall thickness gauges.

- Measuring range: 1.00 ... 300.0 mm

- Resolution: 0.01 mm at ≤99.99 mm

- Accuracy: ±0.5 % of Mw. + 0.05 mm

- Memory capacity: 1500 measured values

- Calibration reference on housing

Ultrasonic Thickness Gauges PCE-TG 150 F2.5

£ 530.00

Price excl. VAT &. delivery
2 year Warranty

The ultrasonic thickness gauges can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the Ultrasonic Thickness Gauges.

- Measuring range: 1.20 ... 300.0 mm / 0.04 ... 11.81"
- Accuracy: ±0.5% of measured value + 0.05 mm
- Memory capacity: 1500 measured values
- Calibration reference on housing
- Probe temperature range: -10 ... 60 °C / 14 ... 140 °F

Paint Thickness Tester PCE-TG 300-NO2

£ 943.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-NO2 is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

- Measuring range: 3.0 … 300.0 mm / 0.118 ... 11.81" (steel)
- Diameter: 14 mm / 0.55"
- Minimum diameter of pipes: 30 mm / 1.18"
- Frequency: 2.5 MHz
- Bluetooth

Paint Thickness Tester PCE-TG 300-NO7

£ 939.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-NO7 is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

- Measuring range: 0.65 ... 200 mm / 0.025 ... 7.87" (steel)
- Diameter: 6 mm / 0.23"
- Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
- Frequency: 7 MHz
- Bluetooth

Ultrasonic Flow Meter PCE-UFM 20

£ 823.00

Price excl. VAT &. delivery
2 year Warranty

With our ultrasonic flow meter , you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow meter is suitable for small pipes with a diameter of DN20 / 3/4" and various pipe materials such as steel, copper, aluminum, and plastics.

- Measurement Range: 0.1 ... 5 m/s

- Resolution: 0.001 m/s

- Accuracy: 2%

- Pipe size: DN 20 / 3/4"

- Display Type: OLED

- Analog Output: 4 ... 20mA

Paint Thickness Tester PCE-TG 300-NO5

£ 908.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-NO5 is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

- Measuring range: 1 ... 600 mm / 0.039 ... 23.62" (steel)
- Diameter: 10mm / 0.39"
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5 MHz
- Bluetooth

Portable Ultrasonic Flow Meter PCE-UFM 20

£ 823.00

Price excl. VAT &. delivery
2 year Warranty

With our portable ultrasonic flow meter, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The Portable ultrasonic flow meter is suitable for small pipes with a diameter of DN20 / 3/4" and various pipe materials such as steel, copper, aluminum, and plastics.

- Measurement Range: 0.1 ... 5 m/s

- Resolution: 0.001 m/s

- Accuracy: 2%

- Pipe Size: DN20 / 3/4"

- Display Type: OLED

- Analog Output: 4 ... 20mA

Portable Ultrasonic Flow Meter PCE-TDS 200+ L

£ 2,710.00

Price excl. VAT &. delivery
2 year Warranty

The Portable Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the

Portable Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Sensor for pipe diameter DN 300 ... 6000 mm

- Sensor dimensions: 91 x 52 x 44 mm

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- measuring parameters: flow velocity, volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery

Gas Leak Detector PCE-LDC 20

£ 4,445.00

Price excl. VAT &. delivery
2 year Warranty

The gas leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

- Units: bar, psi, MPa, l/min, m³/h, cfm

- Leak detection in compressed air, refrigerant
and gas systems

- Leakage assessment

- Various attachments

- Wireless headphones

- Frequency: 38 . .. 42 kHz

- Measurement rate: 1 Hz

- Memory capacity: 1 GB

Gas Leak Detector PCE-LDC 20

£ 4,445.00

Price excl. VAT &. delivery
2 year Warranty

- Units: bar, psi, MPa, l/min, m³/h, cfm

- Leak detection in compressed air, refrigerant
and gas systems

- Leakage assessment

- Various attachments

- Wireless headphones

- Frequency: 38 . .. 42 kHz

- Measurement rate: 1 Hz

- Memory capacity: 1 GB

Ultrasonic Flow Tester PCE-UFM 10

£ 823.00

Price excl. VAT &. delivery
2 year Warranty

With our ultrasonic flow tester, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow tester is suitable for small pipes with a diameter of DN10 / 3/8" and various pipe materials such as steel, copper, aluminum, and plastics.

- Measurement Range: 0.1 ... 5 m/s

- Resolution: 0.001 m/s

- Accuracy: 2%

- Pipe Size: DN10 / 3/8"

- Display Type: OLED

- Analog Output: 4 ... 20mA

Ultrasonic Flow Tester PCE-UFM 15

£ 823.00

Price excl. VAT &. delivery
2 year Warranty

With our ultrasonic flow tester, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow tester is suitable for small pipes with a diameter of DN15 / 1/2" and various pipe materials such as steel, copper, aluminum, and plastics.

- Measurement Range: 0.1 ... 5 m/s

- Resolution: 0.001 m/s

- Accuracy: 2%

- Pipe Size: DN15 / 1/2"

- Display Type: OLED

- Analog Output: 4 ... 20mA

Ultrasonic Flow Tester PCE-UFM 25

£ 823.00

Price excl. VAT &. delivery
2 year Warranty

With our ultrasonic flow tester, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow tester is suitable for small pipes with a diameter of DN25 / 1" and various pipe materials such as steel, copper, aluminum, and plastics.

- Measurement Range: 0.1 ... 5 m/s

- Resolution: 0.001 m/s

- Accuracy: 2%

- Pipe Size: DN25 / 1"

- Display Type: OLED

- Analog Output: 4 ... 20mA

Ultrasonic Flow Tester PCE-UFM 4

£ 823.00

Price excl. VAT &. delivery
2 year Warranty

With our ultrasonic flow tester, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow tester is suitable for small pipes with a diameter of DN4 / 1/8" and various pipe materials such as steel, copper, aluminum, and plastics.

- Measurement Range: 0.1 ... 5 m/s

- Resolution: 0.001 m/s

- Accuracy: 2%

- Pipe Size: DN4 / 1/8"

- Display Type: OLED

- Analog Output: 4 ... 20mA

Ultrasonic Flow Tester PCE-UFM 8

£ 823.00

Price excl. VAT &. delivery
2 year Warranty

With our ultrasonic flow tester, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow tester is suitable for small pipes with a diameter of DN8 / 1/4" and various pipe materials such as steel, copper, aluminum, and plastics.

- Measurement Range: 0.1 ... 5 m/s

- Resolution: 0.001 m/s

- Accuracy: 2%

- Pipe Size: DN8 / 1/4"

- Display Type: OLED

- Analog Output: 4 ... 20mA

Paint Thickness Tester PCE-TG 150 HT

£ 846.00

Price excl. VAT &. delivery
2 year Warranty

The paint thickness tester can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the paint thickness tester.

- Measuring range: 1.20 ... 300.0 mm / 0.04 ... 11.81"
- Accuracy: ±0.5% of measured value + 0.05 mm
- Memory capacity: 1500 measured values
- Calibration reference on housing
- High temperature probe: -10 ... 350 °C / 14 ... 662 °F

Hardness Tester PCE-3000ULS

£ 3,280.00

Price excl. VAT &. delivery
2 year Warranty

The hardness tester can be used to quickly check the hardness of components even when installed. The hardness tester impresses with a large measuring range, easy handling, robust design and temperature resistance down to -20°C.

- Measurement according to UCI method and rebound method

- Testing of HRC, HV, HB

- Measuring direction 360 °

- Large LCD

- USB interface

- incl. UCI probe & type D Leebsonde

Ultrasonic Flow Meter PCE-TDS 200 SR

£ 1,948.00

Price excl. VAT &. delivery
2 year Warranty

The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Pipe size: DN 15 ... 100 / 20 ... 108 mm

- for different media

- for different pipe materials

- Measuring parameters: Flow velocity,
volume flow and volume

- Interface: USB

- Data logger: 10 million measuring points

- LiPo battery