Products for 'Ultrasonic Thickness Tester PCE USC 20 '

Paint Thickness Tester PCE-TG 300-P5EE-ICA incl. ISO calibration certificate

£ 1,237.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-P5EE is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

- Measuring range: P-E: 2 ... 600 mm / 0.07 ... 23.62", E-E: 2.5 ... 100 mm / 0.09 ...3.93"
- Diameter: 10mm / 0.39"
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5MHz
- Bluetooth
- incl. ISO calibration certificate

Ultrasonic Flow Meter PCE-TDS 200+ L-ICA incl. ISO Calibration Certificate

£ 2,964.00

Price excl. VAT &. delivery
2 year Warranty

The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the
ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Pipe size: DN 300 ... 6000 mm

- Sensor dimensions: 91 x 52 x 44 mm

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- measuring parameters: flow velocity,
volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 10 million measuring points

- LiPo battery
- incl. ISO Calibration Certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 200+ L-ICA incl. ISO Calibration Certificate

£ 2,964.00

Price excl. VAT &. delivery
2 year Warranty

The Clamp-on Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Clamp-on Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Sensor for pipe diameter DN 300 ... 6000 mm

- Sensor dimensions: 91 x 52 x 44 mm

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- measuring parameters: flow velocity, volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO Calibration Certifikcate

Paint Thickness Tester PCE-TG 300-HT5-ICA incl. ISO calibration certificate

£ 1,166.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-HT5 is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

- Measuring range: 1 ... 600 mm / 0.039 ... 23.62" (steel)
- Diameter: 12mm / 0.47"
- Minimum diameter of pipes: 30 mm / 1.18"
- Frequency: 5MHz
- Bluetooth
- incl. ISO calibration certificate

Material Tester PCE-3000ULS

£ 3,280.00

Price excl. VAT &. delivery
2 year Warranty

The material tester can be used to quickly check the hardness of components even when installed. The material tester impresses with a large measuring range, easy handling, robust design and temperature resistance down to -20°C.

- Measurement according to UCI method and rebound method

- Testing of HRC, HV, HB

- Measuring direction 360 °

- Large LCD

- USB interface

- incl. UCI probe & type D Leebsonde

Ultrasonic Flow Meter PCE-TDS 200+ SL

£ 2,955.00

Price excl. VAT &. delivery
2 year Warranty

The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the

ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- incl. 4 sensors

- Pipe size:
DN 15 ... 100 / 20 ... 108 mm,
DN 300 ... 6000 mm

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- measuring parameters: Flow velocity,
volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 10 million measuring points

- LiPo battery

Ultrasonic Leak Detector PCE-LDC 8

£ 1,446.00

Price excl. VAT &. delivery
2 year Warranty

The Ultrasonic Leak Detector is used to locate leaks on compressed air lines. Furthermore, the Ultrasonic Leak Detector can also be used on coolant lines or gas lines for leak detection.

- Measuring principle: ultrasound

- Measuring principle: air, coolant, non-explosive gases

- Working frequency of 40 kHz

- up to 6 h battery operation

- Leak detection via headphones and LCD display

- Localize leaks up to 18m, 59 ft.

NDT Tester Inspection Camera PCE-PIC 20

£ 1,765.00

Price excl. VAT &. delivery
2 year Warranty

The NDT tester inspection camera PCE-PIC 20 is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The NDT tester inspection camera PCE-PIC 20 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable.

- Cable diameter / head diameter: 23 mm / 0.9 in
- 20 m / 66 ft push cable
- Electronic meter counting
- Battery and mains operation
- Waterproof up to 20 m / 66 ft

Paint Thickness Tester PCE-TG 300-NO5/90

£ 889.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-NO5/90 is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

- Measuring range: 1 ... 600 mm / 0.039 ... 23.62" (steel)
- Diameter: 10mm / 0.39"
- Sensor at 90° angle
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5 MHz
- Bluetooth

NDT Test Instruments PCE-COM 20

£ 5,229.00

Price excl. VAT &. delivery
2 year Warranty

PCE-COM 20 is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration

Handheld Ultrasonic Flow Meter PCE-TDS+ 200 SML

£ 3,467.00

Price excl. VAT &. delivery
2 year Warranty

The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- incl. 4 sensors

- Pipe size:

DN 20 ... 108 mm / 50 ... 700 mm /
DN 315 ... 6000 mm

- Temperature resistance: -30 ... 160 °C

- for different media

- for different pipe materials

- Measuring parameters: Flow velocity,

volume flow and volume

- Interface: USB

- Data logger: 10 million measuring points

- LiPo battery

Condition Monitoring Ultrasonic Material Thickness Meter PCE-TG 150 HT

£ 846.00

Price excl. VAT &. delivery
2 year Warranty

The condition monitoring ultrasonic material thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the condition monitoring ultrasonic material thickness meter.

- Measuring range: 1.20 ... 300.0 mm / 0.04 ... 11.81"
- Accuracy: ±0.5% of measured value + 0.05 mm
- Memory capacity: 1500 measured values
- Calibration reference on housing
- High temperature probe: -10 ... 350 °C / 14 ... 662 °F

Metal Hardness Tester PCE-3000ULS

£ 3,280.00

Price excl. VAT &. delivery
2 year Warranty

The uci hardness tester can be used to quickly check the hardness of components even when installed. The uci hardness tester impresses with a large measuring range, easy handling, robust design and temperature resistance down to -20°C.

- Measurement according to UCI method and rebound method

- Testing of HRC, HV, HB

- Measuring direction 360 °

- Large LCD

- USB interface

- incl. UCI probe & type D Leebsonde

Paint Thickness Tester PCE-CT 100N

£ 1,362.00

Price excl. VAT &. delivery
2 year Warranty

The thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the thickness gauge are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via wifi and USB
- Two different probes for NFe and Fe (included)

Paint Thickness Tester PCE-TG 300-NO7-ICA incl. ISO calibration certificate

£ 1,046.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-NO7 is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

- Measuring range: 0.65 ... 200 mm / 0.025 ... 7.87" (steel)
- Diameter: 6 mm / 0.23"
- Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
- Frequency: 7 MHz
- Bluetooth
- incl. ISO calibration certificate

Ultrasonic Flow Meter PCE-TDS 200 M

£ 1,780.00

Price excl. VAT &. delivery
2 year Warranty

The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the

ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Pipe size: DN 50 ... 700 / 57 ... 720 mm

- Temperature resistance: -30 ... 160 °C

- for different media

- for different pipe materials

- Measuring parameters:
Flow velocity, flow rate and volume

- Interface: USB

- Data logger: 10 million measuring points

- LiPo battery

Portable Ultrasonic Flow Meter PCE-TDS+ 200 SML

£ 3,467.00

Price excl. VAT &. delivery
2 year Warranty

The Portable Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Portable Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- incl. 4 sensors

- Sensor for pipe diameters DN 20-108 mm / 50-700 mm / 315-6000 mm

- Temperature resistance: -30 ... 160 °C

- for different media

- for different pipe materials

- Measuring parameters: Flow velocity, volume flow and volume

- Interface: USB

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery

Portable Ultrasonic Flow Meter PCE-TDS 200 SR

£ 1,948.00

Price excl. VAT &. delivery
2 year Warranty

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Sensor for pipe diameters: DN 15 ... 100 / 20 ... 108 mm

- for different media

- for different pipe materials

- Measuring parameters: Flow velocity, volume flow and volume

- Interface: USB

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery