Products for 'Ultrasonic Thickness Tester PCE TG 300 ICA incl. ISO calibration certificate '

Ultrasonic Flow Tester Kit PCE-TDS 100HSH-ICA incl. ISO Calibration Certificate

£ 1,816.00

Price excl. VAT &. delivery
2 year Warranty

PCE-TDS 100HSH-ICA is a portable handheld clamp-on ultrasonic flow tester used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 700, 20 … 720 mm (approx. 3/4 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-M1 and TDS-S1
- Incl. ISO Calibration Certificate

Thickness Gauge PCE-TG 150 HT-ICA incl. ISO Calibration Certificate

£ 953.00

Price excl. VAT &. delivery
2 year Warranty

The thickness gauge can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the thickness gauge.

- Measuring range: 1.20 ... 300.0 mm / 0.04 ... 11.81"
- Accuracy: ±0.5% of measured value + 0.05 mm
- Memory capacity: 1500 measured values
- Calibration reference on housing
- High temperature probe: -10 ... 350 °C / 14 ... 662 °F
- incl. ISO Calibration Certificate

Condition Monitoring Device PCE-TG 300-NO2-ICA incl. ISO calibration certificate

£ 1,050.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-NO2 is a condition monitoring device for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the condition monitoring device. Wall thicknesses under a coating can also be measured with the condition monitoring device.

- Measuring range: 3.0 … 300.0 mm / 0.118 ... 11.81" (steel)
- Diameter: 14 mm / 0.55"
- Minimum diameter of pipes: 30 mm / 1.18"
- Frequency: 2.5 MHz
- Bluetooth
- incl. ISO calibration certificate

NDT Test Instrument PCE-TG 300-NO2-ICA incl. ISO calibration certificate

£ 1,050.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-NO2 is an NDT test instrument for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the NDT test instrument. Wall thicknesses under a coating can also be measured with the NDT test instrument.

- Measuring range: 3.0 … 300.0 mm / 0.118 ... 11.81" (steel)
- Diameter: 14 mm / 0.55"
- Minimum diameter of pipes: 30 mm / 1.18"
- Frequency: 2.5 MHz
- Bluetooth
- incl. ISO calibration certificate

IoT Meter PCE-TG 300-NO2-ICA incl. ISO calibration certificate

£ 1,050.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-NO2 is an IoT meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the IoT meter. Wall thicknesses under a coating can also be measured with the IoT meter.

- Measuring range: 3.0 … 300.0 mm / 0.118 ... 11.81" (steel)
- Diameter: 14 mm / 0.55"
- Minimum diameter of pipes: 30 mm / 1.18"
- Frequency: 2.5 MHz
- Bluetooth
- incl. ISO calibration certificate

Ultrasonic Thickness Tester PCE-TG 75A-ICA incl. ISO calibration certificate

£ 460.00

Price excl. VAT &. delivery
2 year Warranty

The ultrasonic thickness gauges can measure material thicknesses of up to 225 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the ultrasonic thickness gauges.

- Measuring range: 1.00 ... 225.0 mm

- Resolution: 0.01 mm at ≤99.99 mm

- Accuracy: ±0.5 % of Mw. + 0.05 mm

- Memory capacity: 500 measured values

- Calibration reference on housing
- incl. ISO calibration certificate

Condition Monitoring Device PCE-TG 300-NO7-ICA incl. ISO calibration certificate

£ 1,046.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-NO7 is a condition monitoring device for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the condition monitoring device. Wall thicknesses under a coating can also be measured with the condition monitoring device.

- Measuring range: 0.65 ... 200 mm / 0.025 ... 7.87" (steel)
- Diameter: 6 mm / 0.23"
- Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
- Frequency: 7 MHz
- Bluetooth
- incl. ISO calibration certificate

IoT Meter PCE-TG 300-NO7-ICA incl. ISO calibration certificate

£ 1,046.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-NO7 is an IoT meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the IoT meter. Wall thicknesses under a coating can also be measured with the IoT meter.

- Measuring range: 0.65 ... 200 mm / 0.025 ... 7.87" (steel)
- Diameter: 6 mm / 0.23"
- Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
- Frequency: 7 MHz
- Bluetooth
- incl. ISO calibration certificate

NDT Test Instrument PCE-TG 300-NO7-ICA incl. ISO calibration certificate

£ 1,046.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-NO7 is an NDT test instrument for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the NDT test instrument. Wall thicknesses under a coating can also be measured with the NDT test instrument.

- Measuring range: 0.65 ... 200 mm / 0.025 ... 7.87" (steel)
- Diameter: 6 mm / 0.23"
- Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
- Frequency: 7 MHz
- Bluetooth
- incl. ISO calibration certificate

NDT Tester - Thickness Meter PCE-TG 150 HT-ICA incl. ISO Calibration Certificate

£ 953.00

Price excl. VAT &. delivery
2 year Warranty

The NDT tester - thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the NDT tester - thickness meter.

Conductivity Tester for Metals PCE-COM 20-ICA incl. ISO Calibration Certificate

£ 5,367.00

Price excl. VAT &. delivery
2 year Warranty

PCE-COM 20-ICA is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration
- incl. ISO Calibration Certificate

Material Tester for Metals PCE-COM 20-ICA incl. ISO Calibration Certificate

£ 5,367.00

Price excl. VAT &. delivery
2 year Warranty

PCE-COM 20-ICA is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

Thickness Meter PCE-TG 150A-ICA incl. ISO calibration certificate

£ 682.00

Price excl. VAT &. delivery
2 year Warranty

The thickness meter can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the thickness meter.

- Measuring range: 1.00 ... 300.0 mm

- Resolution: 0.01 mm at ≤99.99 mm

- Accuracy: ±0.5 % of Mw. + 0.05 mm

- Memory capacity: 1500 measured values

- Calibration reference on housing
- incl. ISO calibration certificate

Condition Monitoring Device PCE-TG 300-NO5-ICA incl. ISO calibration certificate

£ 1,015.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-NO5 is a condition monitoring device for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the condition monitoring device. Wall thicknesses under a coating can also be measured with the condition monitoring device.

- Measuring range: 1 ... 600 mm / 0.039 ... 23.62" (steel)
- Diameter: 10mm / 0.39"
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5 MHz
- Bluetooth
- incl. ISO calibration certificate

IoT Meter PCE-TG 300-NO5-ICA incl. ISO calibration certificate

£ 1,015.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-NO5 is an IoT meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the IoT meter. Wall thicknesses under a coating can also be measured with the IoT meter.

- Measuring range: 1 ... 600 mm / 0.039 ... 23.62" (steel)
- Diameter: 10mm / 0.39"
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5 MHz
- Bluetooth
- incl. ISO calibration certificate

NDT Test Instrument PCE-TG 300-NO5-ICA incl. ISO calibration certificate

£ 1,015.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-NO5 is an NDT test instrument for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the NDT test instrument. Wall thicknesses under a coating can also be measured with the NDT test instrument.

- Measuring range: 1 ... 600 mm / 0.039 ... 23.62" (steel)
- Diameter: 10mm / 0.39"
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5 MHz
- Bluetooth
- incl. ISO calibration certificate

Ultrasonic Thickness Gauge PCE-TG 300-P5EE

£ 1,135.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-P5EE is an ultrasonic thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness gauge. Wall thicknesses under a coating can also be measured with the ultrasonic thickness gauge.

- Measuring range: P-E: 2 ... 600 mm / 0.07 ... 23.62", E-E: 2.5 ... 100 mm / 0.09 ...3.93"
- Diameter: 10mm / 0.39"
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5MHz
- Bluetooth

Ultrasonic Flow Meter PCE-TDS 200+ SL-ICA incl. ISO Calibration Certificate

£ 3,521.00

Price excl. VAT &. delivery
2 year Warranty

The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the

ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- incl. 4 sensors

- Pipe size:
DN 15 ... 100 / 20 ... 108 mm,
DN 300 ... 6000 mm

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- measuring parameters: Flow velocity,
volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 10 million measuring points

- LiPo battery
- incl. ISO Calibration Certificate