Products for 'Thickness Meter PCE USC 20 '

Material Thickness Meter PCE-CT 80-FN1D5

£ 756.00

Price excl. VAT &. delivery
2 year Warranty

The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 1500 µm, NFe: 0 ... 1500 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"

Wall Thickness Meter PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate

£ 997.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-NO5/90 is a wall thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the wall thickness meter. Wall thicknesses under a coating can also be measured with the wall thickness meter.

- Measuring range: 1 ... 600 mm / 0.039 ... 23.62" (steel)
- Diameter: 10mm / 0.39"
- Sensor at 90° angle
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5 MHz
- Bluetooth
- incl. ISO calibration certificate

Surface Testing - Cupping Tester for Coating Flexibility PCE-CPT 20

£ 2,336.00

Price excl. VAT &. delivery
2 year Warranty

PCE-CPT 20 is a cupping tester, or surface coating flexibility testing device, used for testing the formability, ductility, adhesion and elongation of paints, lacquers, varnishes, powder and protective coatings on sheet metal. Used in manufacturing production, paint shop and quality control applications, the PCE-CPT 20 cupping tester aids in determining coating strength, durability and elasticity.

- Tests surface coatings on metal sheets 0.3 to 1.25 mm thick
- Provides a maximum depression force of 2500 N
- Offers a display resolution of 0.01 mm

Material Tester PCE-CPT 20

£ 2,336.00

Price excl. VAT &. delivery
2 year Warranty

PCE-CPT 20 is a Material Tester, or surface coating flexibility testing device, used for testing the formability, ductility, adhesion and elongation of paints, lacquers, varnishes, powder and protective coatings on sheet metal. Used in manufacturing production, paint shop and quality control applications, the Material Tester aids in determining coating strength, durability and elasticity.

- Tests surface coatings on metal sheets 0.3 to 1.25 mm thick
- Provides a maximum depression force of 2500 N
- Offers a display resolution of 0.01 mm

Test Stand PCE-CPT 20

£ 2,336.00

Price excl. VAT &. delivery
2 year Warranty

PCE-CPT 20 is a Test Stand, or surface coating flexibility testing device, used for testing the formability, ductility, adhesion and elongation of paints, lacquers, varnishes, powder and protective coatings on sheet metal. Used in manufacturing production, paint shop and quality control applications, the Test Stand aids in determining coating strength, durability and elasticity.

- Tests surface coatings on metal sheets 0.3 to 1.25 mm thick
- Provides a maximum depression force of 2500 N
- Offers a display resolution of 0.01 mm

Thickness Meter PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate

£ 997.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-NO5/90 is a thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the thickness meter.

- Measuring range: 1 ... 600 mm / 0.039 ... 23.62" (steel)
- Diameter: 10mm / 0.39"
- Sensor at 90° angle
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5 MHz
- Bluetooth
- incl. ISO calibration certificate

Adhesion Tester PCE-CPT 20

£ 2,336.00

Price excl. VAT &. delivery
2 year Warranty

PCE-CPT 20 is a Adhesion Tester, or surface coating flexibility testing device, used for testing the formability, ductility, adhesion and elongation of paints, lacquers, varnishes, powder and protective coatings on sheet metal. Used in manufacturing production, paint shop and quality control applications, the Adhesion Tester aids in determining coating strength, durability and elasticity.

- Tests surface coatings on metal sheets 0.3 to 1.25 mm thick
- Provides a maximum depression force of 2500 N
- Offers a display resolution of 0.01 mm

HVAC Meter PCE-PIC 120

£ 12,231.00

Price excl. VAT &. delivery
2 year Warranty

The HVAC meter PCE-PIC 120 is used to inspect channels and pipes. The HVAC meter has a fiber optic push cable of 120 m / 393.7 ft. At the end of the HVAC meter, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter: 60 mm / 2.4 in
- Cable length: 120 m / 393.7 ft
- Pipe diameter from & to: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley

Ultrasonic Wall Thickness Gauges PCE-TG 150 F2.5-ICA incl. ISO Calibration Certificate

£ 637.00

Price excl. VAT &. delivery
2 year Warranty

The ultrasonic wall thickness gauges can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the ultrasonic wall thickness gauges.

- Measuring range: 1.20 ... 300.0 mm / 0.04 ... 11.81"
- Accuracy: ±0.5% of measured value + 0.05 mm
- Memory capacity: 1500 measured values
- Calibration reference on housing
- Probe temperature range: -10 ... 60 °C / 14 ... 140 °F
- ICA incl. ISO Calibration Certificate

Paint Testing Equipment PCE-CSM 20

£ 4,695.00

Price excl. VAT &. delivery
2 year Warranty

The paint testing equipment is used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the paint testing equipment offers a long battery life, a 4-color lamp and an easy-to-use portable design. The paint testing equipment covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

- Measuring geometry: 8° / d

- Includes Yellowness, Whiteness, Opacity, Staining and other color indexes

- USB cable and software for data transfer

- 2,000 reference standard memory, 20,000 sample memory
- Light source: D65, A, C, D50
- Color ranges: CIE L*a*b, XYZ, Yxy, LCh, CIE LUV, Hunter L*A*B

Material Thickness Meter PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate

£ 997.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-NO5/90 is a material thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material thickness meter. Wall thicknesses under a coating can also be measured with the material thickness meter.

- Measuring range: 1 ... 600 mm / 0.039 ... 23.62" (steel)
- Diameter: 10mm / 0.39"
- Sensor at 90° angle
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5 MHz
- Bluetooth
- incl. ISO calibration certificate

Thickness Gauge PCE-CT 100N-ICA incl. ISO Calibration Certificate

£ 1,481.00

Price excl. VAT &. delivery
2 year Warranty

The coating thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the coating thickness gauge are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate

Coating Thickness Gauge PCE-CT 100N

£ 1,362.00

Price excl. VAT &. delivery
2 year Warranty

Material Thickness Meter PCE-TG 150 HT-ICA incl. ISO Calibration Certificate

£ 953.00

Price excl. VAT &. delivery
2 year Warranty

The material thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the material thickness meter.

- Measuring range: 1.20 ... 300.0 mm / 0.04 ... 11.81"
- Accuracy: ±0.5% of measured value + 0.05 mm
- Memory capacity: 1500 measured values
- Calibration reference on housing
- High temperature probe: -10 ... 350 °C / 14 ... 662 °F
- incl. ISO Calibration Certificate

Thickness Meter PCE-TG 150 HT-ICA incl. ISO Calibration Certificate

£ 953.00

Price excl. VAT &. delivery
2 year Warranty

The thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the thickness meter.

- Measuring range: 1.20 ... 300.0 mm / 0.04 ... 11.81"
- Accuracy: ±0.5% of measured value + 0.05 mm
- Memory capacity: 1500 measured values
- Calibration reference on housing
- High temperature probe: -10 ... 350 °C / 14 ... 662 °F
- incl. ISO Calibration Certificate

Thickness Meter PCE-TG 150A-ICA incl. ISO calibration certificate

£ 682.00

Price excl. VAT &. delivery
2 year Warranty

The thickness meter can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the thickness meter.

- Measuring range: 1.00 ... 300.0 mm

- Resolution: 0.01 mm at ≤99.99 mm

- Accuracy: ±0.5 % of Mw. + 0.05 mm

- Memory capacity: 1500 measured values

- Calibration reference on housing
- incl. ISO calibration certificate

HVAC Meter PCE-PIC 60

£ 11,208.00

Price excl. VAT &. delivery
2 year Warranty

The HVAC meter PCE-PIC 60 is used to inspect channels and pipes. The HVAC meter has a fiber optic push cable of 60 m. At the end of the HVAC meter, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter : 60 mm / 2.4 in
- Cable length: 60 m / 196.9 ft
- Pipe diameter to & from: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley

Thickness Meter PCE-TG 150A

£ 468.00

Price excl. VAT &. delivery
2 year Warranty

- Measuring range: 1.00 ... 300.0 mm

- Resolution: 0.01 mm at ≤99.99 mm

- Accuracy: ±0.5 % of Mw. + 0.05 mm

- Memory capacity: 1500 measured values

- Calibration reference on housing