Products for 'Thickness Meter PCE USC 20 '

£ 846.00

Price excl. VAT &. delivery
2 year Warranty

The material thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the material thickness meter.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C / 14 … 662 °F

Thickness Meter PCE-TG 150 HT

£ 846.00

Price excl. VAT &. delivery
2 year Warranty

The thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the thickness meter.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C / 14 … 662 °F

HVAC Meter PCE-VE 1500-38200

£ 17,039.00

Price excl. VAT &. delivery
2 year Warranty

With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter, consists of braided tungsten.

Endoscope cable length: approx. 2 m / 6.5 ft
Diameter: 3.8mm / 0.15"
Front camera with resolution: 1,000,000 pixels
Front camera viewing angle 120°
Focus 10 … 100 mm / 0.39 … 3.9"
Movable camera head 46 mm / 1.8" long
Bending radius approx. 35 mm / 1.3" at 90°
7" touch screen for easy operation
replaceable battery with status display
Storage of recording on SD card
Motor with endoscope cable can be changed quickly
HDMI connection for direct image transmission

Wall Thickness Meter PCE-TG 300-P5EE-ICA incl. ISO calibration certificate

£ 1,237.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-P5EE is a wall thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the wall thickness meter. Wall thicknesses under a coating can also be measured with the wall thickness meter.

Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
Diameter: 10mm / 0.39"
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5MHz
Bluetooth
incl. ISO calibration certificate

Wall Thickness Meter PCE-TG 300-HT5-ICA incl. ISO calibration certificate

£ 1,166.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-HT5 is a wall thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the wall thickness meter. Wall thicknesses under a coating can also be measured with the wall thickness meter.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 12mm / 0.47"
Minimum diameter of pipes: 30 mm / 1.18"
Frequency: 5MHz
Bluetooth
incl. ISO calibration certificate

Wall Thickness Meter PCE-TG 150A HT

£ 846.00

Price excl. VAT &. delivery
2 year Warranty

The material thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the material thickness gauge.

Measuring range (with sensor): 1.20 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of the weight. + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C

Material Thickness Meter PCE-TG 300-P5EE-ICA incl. ISO calibration certificate

£ 1,237.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-P5EE is a material thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material thickness meter. Wall thicknesses under a coating can also be measured with the material thickness meter.

Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
Diameter: 10mm / 0.39"
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5MHz
Bluetooth
incl. ISO calibration certificate

Gas Leak Detector PCE-LDC 20

£ 4,445.00

Price excl. VAT &. delivery
2 year Warranty

The gas leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant and gas systems
Leakage assessment
Various attachments

Wireless headphones
Frequency: 38 . .. 42 kHz
Measurement rate: 1 Hz
Memory capacity: 1 GB

Gas Leak Detector PCE-LDC 20

£ 4,445.00

Price excl. VAT &. delivery
2 year Warranty

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant and gas systems
Leakage assessment
Various attachments

Wireless headphones
Frequency: 38 . .. 42 kHz
Measurement rate: 1 Hz
Memory capacity: 1 GB

Thickness Meter PCE-TG 300-P5EE-ICA incl. ISO calibration certificate

£ 1,237.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-P5EE is a thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the thickness meter.

Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
Diameter: 10mm / 0.39"
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5MHz
Bluetooth
incl. ISO calibration certificate

Conductivity Tester for Metals PCE-COM 20-ICA incl. ISO Calibration Certificate

£ 5,367.00

Price excl. VAT &. delivery
2 year Warranty

PCE-COM 20-ICA is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

Operating frequency: 60 kHz
Sine wave probe: Ø 14 mm / ≈ 0.55 in
Memory: Up to 500 groups of measurements
Lift-off and temperature compensation
Automatic calibration
incl. ISO Calibration Certificate

Thickness Meter PCE-TG 300-HT5-ICA incl. ISO calibration certificate

£ 1,166.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-HT5 is a thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the thickness meter.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 12mm / 0.47"
Minimum diameter of pipes: 30 mm / 1.18"
Frequency: 5MHz
Bluetooth
incl. ISO calibration certificate

Material Thickness Meter PCE-TG 150A HT

£ 846.00

Price excl. VAT &. delivery
2 year Warranty

Measuring range (with sensor): 1.20 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of the weight. + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C

Thickness Meter PCE-TG 150A HT

£ 846.00

Price excl. VAT &. delivery
2 year Warranty

Measuring range (with sensor): 1.20 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of the weight. + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C

Vibration Meter PCE-VM 20-ICA incl. ISO Calibration Certificate

£ 1,833.00

Price excl. VAT &. delivery
2 year Warranty

The vibration meter PCE-VM 20-ICA is a compact device for direct evaluation of the vibration behavior of a machine. The vibration meter can measure and display various vibration parameters, such as vibration acceleration, vibration velocity or vibration displacement.

Vibration acceleration: 0 … 200 m/s², RMS and peak-peak
Vibration speed: 0 … 200 mm/s, RMS
Vibration distance: 0 … 2000 μm, peak-peak
Real-time FFT analysis
Direct evaluation according to DIN ISO 10816
incl. ISO Calibration Certificate

Material Thickness Meter PCE-TG 300-HT5-ICA incl. ISO calibration certificate

£ 1,166.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-HT5 is a material thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material thickness meter. Wall thicknesses under a coating can also be measured with the material thickness meter.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 12mm / 0.47"
Minimum diameter of pipes: 30 mm / 1.18"
Frequency: 5MHz
Bluetooth
incl. ISO calibration certificate

NDT Test Instruments PCE-COM 20-ICA incl. ISO Calibration Certificate

£ 5,367.00

Price excl. VAT &. delivery
2 year Warranty

Operating frequency: 60 kHz
Sine wave probe: Ø 14 mm / ≈ 0.55 in
Memory: Up to 500 groups of measurements
Lift-off and temperature compensation
Automatic calibration
incl. ISO Calibration Certificate

Wall Thickness Meter PCE-TG 300-NO5/90

£ 889.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-TG 300-NO5/90 is a wall thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the wall thickness meter. Wall thicknesses under a coating can also be measured with the wall thickness meter.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth