Products for 'Thickness Gauge PCE TG 300 '

£ 352.00

Price excl. VAT &. delivery
2 year Warranty

The wall thickness meter can measure material thicknesses of up to 225 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the wall thickness meter.

- Measuring range: 1.00 ... 225.0 mm

- Resolution: 0.01 mm at ≤99.99 mm

- Accuracy: ±0.5 % of Mw. + 0.05 mm

- Memory capacity: 500 measured values

- Calibration reference on housing

Coating Thickness Gauge PCE-CT 80-FN2

£ 765.00

Price excl. VAT &. delivery
2 year Warranty

The coating thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the coating thickness gauge, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 2000 µm, NFe: 0 ... 2000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"

Counting Scale PCE-SD 300 SST

£ 4,491.00

Price excl. VAT &. delivery
2 year Warranty

Verification for Trade / conformity assessment

The calibratable stainless steel counting scale PCE-SD… SST is calibrated for its location of use according to calibration class III before delivery and is then approved for two years in all of Europe for the legal-for-trade movement of goods, calibration class III. The stainless steel counting scale is made of solid corrosion and acid-resistant steel.

- Weighing range: 300 kg
- Readability: 0.1 kg
- Calibration included
- Verifiable M III

Parcel Scale PCE-SD 300 SST

£ 4,491.00

Price excl. VAT &. delivery
2 year Warranty

The calibratable stainless steel parcel scale PCE-SD… SST is calibrated for its location of use according to calibration class III before delivery and is then approved for two years in all of Europe for the legal-for-trade movement of goods, calibration class III. The stainless steel parcel scale is made of solid corrosion and acid-resistant steel.

- Weighing range: 300 kg
- Readability: 0.1 kg
- Calibration included
- Verifiable M III

Shipping Scale PCE-SD 300 SST

£ 4,491.00

Price excl. VAT &. delivery
2 year Warranty

The calibratable stainless steel shipping scale PCE-SD… SST is calibrated for its location of use according to calibration class III before delivery and is then approved for two years in all of Europe for the legal-for-trade movement of goods, calibration class III. The stainless steel shipping scale is made of solid corrosion and acid-resistant steel.

- Weighing range: 300 kg
- Readability: 0.1 kg
- Calibration included
- Verifiable M III

Weighing Platform PCE-SD 300 SST

£ 4,491.00

Price excl. VAT &. delivery
2 year Warranty

The calibratable stainless steel weighing platform PCE-SD… SST is calibrated for its location of use according to calibration class III before delivery and is then approved for two years in all of Europe for the legal-for-trade movement of goods, calibration class III. The stainless steel weighing platform is made of solid corrosion and acid-resistant steel.

- Weighing range: 300 kg
- Readability: 0.1 kg
- Calibration included
- Verifiable M III

Ultrasonic Thickness Tester PCE-TG 150 F2.5

£ 530.00

Price excl. VAT &. delivery
2 year Warranty

The ultrasonic thickness tester can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the ultrasonic thickness tester.

- Measuring range: 1.20 ... 300.0 mm / 0.04 ... 11.81"
- Accuracy: ±0.5% of measured value + 0.05 mm
- Memory capacity: 1500 measured values
- Calibration reference on housing
- Probe temperature range: -10 ... 60 °C / 14 ... 140 °F

Pallet Scale PCE-SD 300 SST

£ 4,491.00

Price excl. VAT &. delivery
2 year Warranty

The calibratable stainless steel pallet scale PCE-SD… SST is calibrated for its location of use according to calibration class III before delivery and is then approved for two years in all of Europe for the legal-for-trade movement of goods, calibration class III. The stainless steel pallet scale is made of solid corrosion and acid-resistant steel.

- Weighing range: 300 kg

- Readability: 0.1 kg

- Calibration included

- Verifiable M III

Trade Approved Scale PCE-SD 300 SST

£ 4,491.00

Price excl. VAT &. delivery
2 year Warranty

The trade approved scale is calibrated for its location of use according to calibration class III before delivery and is then approved for two years in all of Europe for the legal-for-trade movement of goods, calibration class III. The stainless steel trade approved scale is made of solid corrosion and acid-resistant steel.

- Weighing range: 300 kg

- Readability: 0.1 kg

- Calibration included

- Verifiable M III

Coating Thickness Gauge PCE-CT 80-FN1D5

£ 756.00

Price excl. VAT &. delivery
2 year Warranty

- Measuring range: Fe: 0 ... 1500 µm, NFe: 0 ... 1500 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"

Legal for Trade Balance PCE-SD 300 SST

£ 4,491.00

Price excl. VAT &. delivery
2 year Warranty

The legal for trade balance is calibrated for its location of use according to calibration class III before delivery and is then approved for two years in all of Europe for the legal-for-trade movement of goods, calibration class III. The legal for trade balance is made of solid corrosion and acid-resistant steel.

- Weighing range: 300 kg
- Readability: 0.1 kg
- Calibration included
- Verifiable M III

NTEP Certified Scale PCE-SD 300 SST

£ 4,491.00

Price excl. VAT &. delivery
2 year Warranty

The NTEP Certified Scale is calibrated for its location of use according to calibration class III before delivery and is then approved for two years in all of Europe for the legal-for-trade movement of goods, calibration class III. The NTEP Certified Scale is made of solid corrosion and acid-resistant steel.

- Weighing range: 300 kg
- Readability: 0.1 kg
- Calibration included
- Verifiable M III

Thickness Meter PCE-TG 75A

£ 352.00

Price excl. VAT &. delivery
2 year Warranty

The thickness meter can measure material thicknesses of up to 225 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the thickness meter.

- Measuring range: 1.00 ... 225.0 mm

- Resolution: 0.01 mm at ≤99.99 mm

- Accuracy: ±0.5 % of Mw. + 0.05 mm

- Memory capacity: 500 measured values

- Calibration reference on housing

Wall Thickness Meter PCE-TG 75A-ICA incl. ISO calibration certificate

£ 460.00

Price excl. VAT &. delivery
2 year Warranty

- Measuring range: 1.00 ... 225.0 mm

- Resolution: 0.01 mm at ≤99.99 mm

- Accuracy: ±0.5 % of Mw. + 0.05 mm

- Memory capacity: 500 measured values

- Calibration reference on housing
- incl. ISO calibration certificate

Floor Scale PCE-SD 300 SST

£ 4,491.00

Price excl. VAT &. delivery
2 year Warranty

The calibratable stainless steel floor scale PCE-SD… SST is calibrated for its location of use according to calibration class III before delivery and is then approved for two years in all of Europe for the legal-for-trade movement of goods, calibration class III. The stainless steel floor scale is made of solid corrosion and acid-resistant steel.

- Weighing range: 300 kg
- Readability: 0.1 kg
- Calibration included
- Verifiable M III

Platform Scale PCE-SD 300 SST

£ 4,491.00

Price excl. VAT &. delivery
2 year Warranty

The calibratable stainless steel platform scale is calibrated for its location of use according to calibration class III before delivery and is then approved for two years in all of Europe for the legal-for-trade movement of goods, calibration class III. The stainless steel platform scale is made of solid corrosion and acid-resistant steel.

- Weighing range: 300 kg

- Readability: 0.1 kg

- Calibration included

- Verifiable M III

Industrial Scale PCE-SD 300 SST

£ 4,491.00

Price excl. VAT &. delivery
2 year Warranty

The calibratable stainless steel industrial scale is calibrated for its location of use according to calibration class III before delivery and is then approved for two years in all of Europe for the legal-for-trade movement of goods, calibration class III. The stainless steel industrial scale is made of solid corrosion and acid-resistant steel.

- Weighing range: 300 kg

- Readability: 0.1 kg

- Calibration included

- Verifiable M III

Condition Monitoring Ultrasonic Material Thickness Meter PCE-TG 150A-ICA incl. ISO calibration certificate

£ 682.00

Price excl. VAT &. delivery
2 year Warranty

The material thickness meter can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the material thickness meter.

- Measuring range: 1.00 ... 300.0 mm

- Resolution: 0.01 mm at ≤99.99 mm

- Accuracy: ±0.5 % of Mw. + 0.05 mm

- Memory capacity: 1500 measured values

- Calibration reference on housing
- incl. ISO calibration certificate