- Interface: RS 485 Modbus RTU Master
- Number of slave devices / registers: 10
- Baud rate individually adjustable
- Further power supply area

- Power supply:
   230V, 110V, 24V, 20 ... 40V AC/DC,
   85 ... 253 V AC/DC (selectable)
- Input signal:
   1 ... 100V, 2.5 ... 250V, 4 ... 400V,
   20 ... 500 Hz, 1 A, 5 A (selectable)
- Display: 4 digits, red
- Digit height: 20 mm / 0.78"

With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.

- Diameter: Ø2.8mm / 0.11"
- Cable length: 2m / 6.5 ft
- Camera direction: 0°
- Resolution: 160,000 pixels
- Focusing range: 5 ... 50 mm / 0.19 ... 1.96"
- 7" touch screen for easy operation
- Replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

 - Power supply:
   230 V, 110 V, 24 V, 20 ... 40 V AC/DC,
   85 ... 253 V AC/DC (selectable)
- Input signal: ±100 V DC, ±250 V DC,
   ± 400 V DC, 1 A DC, 5 A DC (selectable)
- Display: 4 digits, red
- Digit height: 20 mm / 0.78"

Note: This item must be configured before ordering!

For industrial continuous production of wood pellets, chips, sawdust and similar materials when in-line moisture measurement for monitoring and controlling the drying and mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 210 moisture test sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.

- Measuring range: 0 ... 100%
- The maximum permissible error (absolute): Lab analysis of your sample determines % error
- Temperature range: +5 ... +80 °C  (+41 ... +176 °F)
- Questionnaire starts evaluation process

The panel meter is used for the signal processing of 4 .. 20 mA. The panel meter has a 5-digit LED display to allow the user to read the directly measured current values.

- Power supply: 230 V, 110 V, 24 V, 20 ... 40 V AC/DC, 85 ... 253 V AC/DC (selectable)
- Input signal: 0/4 ... 20 mA, 0 ... 60 mV, ±60 mV DC, 0 ... 10 V, ± 10 V DC (selectable)
- Display: 4 digits, red
- Digit height: 20 mm

The panel indicator can be used to measure AC voltages up to 400 V and AC currents. The voltage to be measured is connected directly and can then be read on the 5-digit LED display of the panel indicator.

- Input:
   1A AC, 5A AC, 100V AC, 250V AC,
   400 V AC, 20 ... 500 Hz (selectable)
- Supply voltage:
   85 ... 253V AC/DC / 20 ... 40 V AC/DC (selectable)
- Display: 5 digits, three colors
- Digit height: 14 mm / 0.55"

- 2 internal counters
- Front IP 65
- 3 colour indication display
- 2 alarm outputs

 - Power supply:
   230 V, 110 V, 24 V, 20 ... 40 V AC/DC,
   85 ... 253 V AC/DC (selectable)
- Input signal: ±100 V DC, ±250 V DC,
   ± 400 V DC, 1 A DC, 5 A DC (selectable)
- Display: 4 digits, red
- Digit height: 20 mm / 0.78"

Note: This item must be configured before ordering!

- 2 internal counters
- Front IP 65
- 3 colour indication display
- 2 alarm outputs

The panel indicator is used for the signal processing of 4 .. 20 mA. The panel indicator has a 5-digit LED display to allow the user to read the directly measured current values.

- Power supply: 230 V, 110 V, 24 V, 20 ... 40 V AC/DC, 85 ... 253 V AC/DC (selectable)
- Input signal: 0/4 ... 20 mA, 0 ... 60 mV, ±60 mV DC, 0 ... 10 V, ± 10 V DC (selectable)
- Display: 4 digits, red
- Digit height: 20 mm

With this videoscope, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the videoscope consists of braided tungsten.

- Diameter: Ø6mm / 0.23"
- Cable length: 5m / 16.4 ft
- Camera direction: 0°
- Resolution: 1MP
- Focusing range: 5 ... 50 mm / 0.19 ... 1.96"
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

- Measuring range: 10 ... 100 N/mm² / 1500 ... 8500 PSI (lbs / in²)
- Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
- Digital Display of results
- USB interface for connection to a PC
- Data storage
- Rechargeable battery

- Measuring range: 10 ... 100 N/mm² / 1500 ... 8500 PSI (lbs / in²)
- Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
- Digital Display of results
- USB interface for connection to a PC
- Data storage
- Rechargeable battery

With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter, consists of braided tungsten.

- Endoscope cable length: approx. 2 m / 6.5 ft
- Diameter: 3.8mm / 0.15"
- Front camera with resolution: 1,000,000 pixels
- Front camera viewing angle 120°
- Focus 10 … 100 mm / 0.39 … 3.9"
- Movable camera head 46 mm / 1.8" long
- Bending radius approx. 35 mm / 1.3" at 90°
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.

- Diameter: Ø2.2mm / 0.08"
- Cable length: 1m / 3.2 ft
- Camera direction: 90°
- Resolution: 160,000 pixels
- Focusing range: 5 ... 50 mm / 0.19 ... 1.96"
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

- Display range: 0 ... 999999
- Input range: 0.1 Hz ... 1 kHz
- Display range revolutions 6 ... 60000 RPM
- 6-digit LED display
- Display of the pulses per revolution
- Adjustable divider via buttons

With this videoscope, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the videoscope consists of braided tungsten.

- Borescope camera cable length: 2 m / 6.5 ft
- Cable diameter: 6mm / 0.23"
- Direction of view of the camera frontal
- Camera resolution 1 million pixels
- Camera viewing angle 120°
- Focusing distance 10 … 100 mm / 0.39 … 3.9"
- Flexible camera head length 60 mm / 2.3"
- Radius at 90° bend 50 mm / 1.9"
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission