2 year Warranty
PCE-IVE 300 is a surface testing - inspection camera that comes with a rigid telescoping pole that extends up to 1 m (3.28') in length. Ideal for inspecting gutters, chimneys and structures as well as for inspecting parts and under vehicles, the surface testing - inspection camera captures both picture and video and saves the files to an SD card memory (included).
- Telescopic pole extends up to 1 m / 3.3 ft
- Gooseneck camera head diameter of 28 mm / 1.11 in
- Waterproof and dustproof IP68 ingress protection rating
PCE-TC 28 is an infrared thermometer designed for non-contact temperature measurement. This infrared thermometer has adjustable emissivity and captures infrared images. This infrared thermometer also can take normal pictures, as well as a mixture of both normal and infrared, due to the built-in digital camera.
- Measurement range: -20 ... +600°C / -4 ... 1112°F
- Accuracy: ± 2%, ± 2°C / 3.6°F
- Frequency image recording: 9 Hz
- Camera: 32 x 31 Pixel
The Inspection Camera PCE-TC 28 was designed for taking non-contact temperature measurements. To get accurate readings, the emissivity of the inspection camera can be adjusted, depending on the operation purpose. Besides taking infrared images, the inspection camera can also take normal pictures, as well as a mixture of both, due to the built-in digital camera.
- Measurement range: -20 ... +600°C / -4 ... 1112°F
- Accuracy: ± 2%, ± 2°C / 3.6°F
- Frequency image recording: 9 Hz
- Camera: 32 x 31 Pixel
- incl. ISO Calibration Certificate
The Inspection Camera PCE-TC 28 was designed for taking non-contact temperature measurements. To get accurate readings, the emissivity of the inspection camera can be adjusted, depending on the operation purpose. Besides taking infrared images, the inspection camera can also take normal pictures, as well as a mixture of both, due to the built-in digital camera.
- Measurement range: -20 ... +600°C / -4 ... 1112°F
- Accuracy: ± 2%, ± 2°C / 3.6°F
- Frequency image recording: 9 Hz
- Camera: 32 x 31 Pixel
PCE-COM 20 is a portable handheld non-destructive surface testing - conductivity meter for metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.
- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration
The surface testing PCE-IVE 320 is a borescope, inspection camera, videoscope or industrial endoscope that comes with a rigid telescoping pole that extends up to 2.3 m (7.6 ft) in length (3 m / 9.8 ft long total with camera connection). Plus, the surface testing - inspection camera has a 0.3 megapixel camera with a 23 mm (0.91 in) diameter flexible head with microphone and 12 white LEDs offering adjustable brightness. Includes wheel attachment for under vehicle inspection.
- Telescopic pole extends up to 2.3 m / 7.6 ft
(3 m /9.8 ft long total with camera connection)
- 12.7 cm / 5" LCD monitor with 800 x 480 pixel resolution
- Video recording capability
- Accommodates SD memory cards from 2 ... 32 GB
- Spare battery to allow all day operation
The surface testing - colorimeter PCE-CSM 8 was developed for quality control, offers a high accuracy and comes with a 3.5" touch screen display. When using the colorimeter, you can choose between different color spaces (CIE LAB, XYZ, Yxy, LCh, and LUV) and 13 illuminants. The reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily to determine delta pass/fail. 58 mm sphere with wavelength from 400 to 700 nm in 10 nm increments.
- CIE LAB, XYZ, Yxy, LCh, and LUV
- 13 illuminants to choose, white and black calibration
- 1000 alphanumeric reference values and up to 10,000 sample values memory
- WI, YI, TI, Mt, Color Stain, Color Fastness, SCI and SCE option (specular included and excluded)
- Measuring aperture of 8 mm and 45°/0° illumination/viewing angle
The Thermal Camera PCE-TC 28 was designed for taking non-contact temperature measurements. To get accurate readings, the emissivity of the thermal camera can be adjusted, depending on the operation purpose. Besides taking infrared images, the camera can also take normal pictures, as well as a mixture of both, due to the built-in digital camera. This kind of test instruments help electricians and and maintenance workes in condition monitoring.
- Measurement range: -20 ... +600°C / -4 ... 1112°F
- Accuracy: ± 2%, ± 2°C / 3.6°F
- Frequency image recording: 9 Hz
- Camera: 32 x 31 Pixel