The multi-parameter pH meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter pH meter. With this multi-parameter pH meter it is possible, for example, to determine alkalinity, chlorine, cyanuric acid or the pH value.

- Adjustable units: mg/l, ppm
- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm (10ml)
Parameter:
- Chlorine
- pH
- Total hardness
- Iron

- Measuring range: 0.00 ... 14.00 pH
- Accuracy: ± 0.1 pH (at 20°C / 68°F), ± 0.2 pH
- Resolution: 0.01 pH
- Ideal for school facilities
- Exchangeable electrode through BNC connection

- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)
Parameters:

The multi-parameter pH meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter pH meter.

- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm (10ml)
Parameter:
- pH
- Urea
- Nitrite
- Nitrate
- Phosphate
- Ammonia
- Iron
- Copper
- Potassium

- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)
Parameters:

The soil pH meter is a straightforward device for determining the pH value of soil. The instrument has an external pH electrode with cable and it is waterproof (IP 67). The soil pH meter can be recalibrated by using the calibration solutions that are supplied with the device.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- pH electrode for piercing into Soil
- Incl. ISO calibration certificate

**Care must be taken when inserting probe to not break it**

- Measuring range: 0 ... 14 pH
- Measuring range: 0 ... 65°C / 32 ... 149°F
- Large LED display
- 2 control relays for pH and temperature
- Connection via BNC and screw contacts
- For water treatment, electroplating ...
- Sensors selectable

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7 or 10
- Aqueous media
- Incl. ISO calibration certificate

- Calibration points: 1, 2 or 3
- Measuring range: -1 ... 15 pH
- Temperature measuring range: 0.0 ... 60°C / 32 ... 140°F  
- Flat pH electrode with long shaft
- Automatic temperature compensation
- For small sample quantities

- Measuring range: 0 ... 14 pH
- Measuring range: 0 ... 65°C / 32 ... 149°F
- Large LED display
- 2 control relays for pH and temperature
- Connection via BNC and screw contacts
- For water treatment, electroplating ...
- Sensors selectable

The redox meter is the optimal tool for checking the most important water parameters. The portable redox meter is used to control pH and conductivity (optional).

- 6 in 1 redox tester
- Measuring range: ± 1000 mV
- Exchangeable electrodes
- Automatic electrode detection
- Ideal for aquariums

- Calibration points: 1, 2 or 3
- Measuring range: -1 ... 15 pH
- Temperature measuring range: 0.0 ... 60°C / 32 ... 140°F  
- Flat pH electrode with long shaft
- Automatic temperature compensation
- For small sample quantities

The environmental meter is used to measure the pH of viscous media. Thanks to the flat pH electrode, the environmental meter is particularly well suited for the measurement of the pH value of sludges or viscous media such as oils and creams. The measuring range of the environmental meter ranges from -1 ... 15 pH, and it has an internal calibration function with up to 3 interpolation points.

- Calibration points: 1, 2 or 3
- Measuring range: -1 ... 15 pH
- Temperature measuring range: 0.0 ... 60°C / 32 ... 140°F
- Flat pH electrode
- Automatic temperature compensation
- For viscous liquids