1. You are here:
  2. Home
  3. Products for 'Process Calibrator PCE MCA 50 '
HVAC Meter PCE-GPA 50-ICA incl. ISO Calibration Certificate
£ 853.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The PCE-GPA 50 HVAC meter is used to measure the current of 1- or 3-phase loads. This HVAC meter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the HVAC meter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
- incl. ISO Calibration Certificate
Details
Microscope PCE-VMM 50
£ 1,228.00
Price excl. VAT &. delivery
2 year Warranty
The PCE-VMM 50 microscope is a video microscope with a large sample support surface of 380 x 225 mm / 15 x 8.9 in. This makes it possible to freely position even larger samples on the camera microscope.

- Magnification: 0.7 ... 4.5 times
- Eyepiece: 0.5 times
- Front lens: 2x
- Sample support surface of 380 x 225 mm / 15 x 8.9 in
- Incident light illumination (by LED)
- LCD monitor
- Removable LCD
Details
Force Gauge PCE-PFG 50-ICA incl. ISO-calibration certificate
£ 619.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The PCE-PFG force gauge is a handy, digital measuring device for measuring tensile and compressive forces. The force gauge offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

- Measuring range: 0 ... 50 N
- Resolution: 0.01 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- incl. ISO-calibration certificate
Details
Air Quality Particle Counting PCE-CPC 50
£ 1,682.00
Price excl. VAT &. delivery
2 year Warranty
Topseller
The state-of-the-art air quality particle counting enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the air quality particle counting is performed by an internal pump.

- Particle concentration:  0.3  ... 10 μm
- Particle measurement channel sizes: 
  0.3, 0.5, 1.0, 2.5, 5.0, 10 µm
- Output in particles/m³, 
  particles/l or particles/28.3L
- Modbus RTU and MQTT via RS485
- Analogue output 4 . .. 20 mA
Details
PCE-VTS 50-DFG N 500-KIT incl. Force Test Stand and Force Gauge
£ 2,207.00
Price excl. VAT &. delivery
2 year Warranty
Force test stand
The motorised force test stand can be used for vertical tensile and compressive force tests. All force gauges from PCE Instruments can be mounted on the force test stand (if necessary with an adapter plate). The force test stand can withstand a maximum load of 500 N.

- Force range: max. 500 N / 50 kg / 110 lb
- Travel path: max. 270 mm / 10.6"
- Feed speed: 1 ... 500 mm/min
- Manual or automatic procedure

Force gauge
Digital force gauge for tensile force measurement and compressive force measurement up to 500 N. The digital force gauge is for precise measurements with a resolution of 0.1 N.

- Measuring range: 0 ... 500 N
- Accuracy: ± 0.1% of the measuring range
- Tensile and compressive force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Memory for 100 measurements
- 220V AC ONLY
Details
PCE-VTS 50-DFG N 500-KIT incl. Force Test Stand and Force Gauge
£ 2,207.00
Price excl. VAT &. delivery
2 year Warranty
Force test stand
The motorised force test stand can be used for vertical tensile and compressive force tests. All force gauges from PCE Instruments can be mounted on the force test stand (if necessary with an adapter plate). The force test stand can withstand a maximum load of 500 N.

- Force range: max. 500 N / 50 kg / 110 lb
- Travel path: max. 270 mm / 10.6"
- Feed speed: 1 ... 500 mm/min
- Manual or automatic procedure

Force gauge
Digital force gauge for tensile force measurement and compressive force measurement up to 500 N. The digital force gauge is for precise measurements with a resolution of 0.1 N.

- Measuring range: 0 ... 500 N
- Accuracy: ± 0.1% of the measuring range
- Tensile and compressive force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Memory for 100 measurements
- 220V AC ONLY
Details
Photometer PCE-TUM 50
£ 1,008.00
Price excl. VAT &. delivery
2 year Warranty
The Photometer PCE-TUM 50 is a portable device for measuring turbidity according to ISO 7027. This allows the user to quickly and easily determine important water parameters with the photometer and to check the quality of drinking water and waste water.

- Measurement method: ISO 7027 (90°)
- Measuring ranges: 0 ... 2000 NTU
                                   0 ... 500 EBC
                                   0 ... 9999 ASBC
- 3 measuring units
Turbidity calibration up to 7 points
Details
Colorimeter PCE-TUM 50
£ 1,008.00
Price excl. VAT &. delivery
2 year Warranty
The Colorimeter PCE-TUM 50 is a portable device for measuring turbidity according to ISO 7027. This allows the user to quickly and easily determine important water parameters with the Colorimeter and to check the quality of drinking water and waste water.

- Measurement method: ISO 7027 (90°)
- Measuring ranges: 0 ... 2000 NTU
                                   0 ... 500 EBC
                                   0 ... 9999 ASBC
- 3 measuring units
Turbidity calibration up to 7 points
Details
Portable Power Analyzer PCE-GPA 50-ICA incl. ISO Calibration Certificate
£ 853.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The PCE-GPA 50 Portable Power Analyzer is used to measure the current of 1- or 3-phase loads. This Portable Power Analyzer is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the Portable Power Analyzer.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
- incl. ISO Calibration Certificate
Details
Class 1 Sound Level Calibrator PCE-SC 09
£ 441.00
Price excl. VAT &. delivery
2 year Warranty
The Class I Sound Level Calibrator is a battery powered sound source. With the Class I sound level calibrator, direct and fast calibrations of sound level meters and other systems for noise measurement can be carried out. 

- Sound pressure level: 94 dB, 114 dB
- Accuracy class: IEC 942, class 1
- Accuracy sound level: ± 0.3 dB (20°C / 68°C, 760 mm / 30 in Hg)
- Frequency: 1000 Hz for A, B, C and D frequency weighting
Details
Inspection Camera PCE-VMM 50
£ 1,228.00
Price excl. VAT &. delivery
2 year Warranty
The PCE-VMM 50 inspection camera is a video microscope with a large sample support surface of 380 x 225 mm / 15 x 8.9 in. This makes it possible to freely position even larger samples on the inspection camera.

- Magnification: 0.7 ... 4.5 times
- Eyepiece: 0.5 times
- Front lens: 2x
- Sample support surface of 380 x 225 mm / 15 x 8.9 in
- Incident light illumination (by LED)
- LCD monitor
- Removable LCD
Details
Force Gage PCE-PFG 50-ICA incl. ISO-calibration certificate
£ 619.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The PCE-PFG force gage is a handy, digital measuring device for measuring tensile and compressive forces. The force gage offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

- Measuring range: 0 ... 50 N
- Resolution: 0.01 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- incl. ISO-calibration certificate
Details
1-Phase Power Meter PCE-GPA 50-ICA incl. ISO Calibration Certificate
£ 853.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The PCE-GPA 50 1-phase power meter is used to measure the current of 1- or 3-phase loads. This 1-phase power meter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power meter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
- incl. ISO Calibration Certificate
Details
Three-Phase Power Meter PCE-GPA 50-ICA incl ISO Calibration
£ 853.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The 3-phase power meter / 3-phase power analyzer is used to measure the current of 1- or 3-phase loads. This 3-phase power meter / 3-phase power analyzer is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power meter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
- incl. ISO Calibration Certificate
Details
Durometer PCE-PFG 50-ICA incl. ISO-calibration certificate
£ 619.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The PCE-PFG Durometer is a handy, digital measuring device for measuring tensile and compressive forces. The Durometer offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

- Measuring range: 0 ... 50 N
- Resolution: 0.01 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- incl. ISO-calibration certificate
Details
PCE-VTS 50-DFG N 500-KIT incl. Force Test Stand and Force Gauge
£ 2,207.00
Price excl. VAT &. delivery
2 year Warranty
Force test stand
The motorised force test stand can be used for vertical tensile and compressive force tests. All force gauges from PCE Instruments can be mounted on the force test stand (if necessary with an adapter plate). The force test stand can withstand a maximum load of 500 N.

- Force range: max. 500 N / 50 kg / 110 lb
- Travel path: max. 270 mm / 10.6"
- Feed speed: 1 ... 500 mm/min
- Manual or automatic procedure

Force gauge
Digital force gauge for tensile force measurement and compressive force measurement up to 500 N. The digital force gauge is for precise measurements with a resolution of 0.1 N.

- Measuring range: 0 ... 500 N
- Accuracy: ± 0.1% of the measuring range
- Tensile and compressive force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Memory for 100 measurements
- 220V AC ONLY
Details
PCE-VTS 50-DFG N 500-KIT incl. Force Test Stand and Force Gage
£ 2,207.00
Price excl. VAT &. delivery
2 year Warranty
Force test stand
The motorised force test stand can be used for vertical tensile and compressive force tests. All force gauges from PCE Instruments can be mounted on the force test stand (if necessary with an adapter plate). The force test stand can withstand a maximum load of 500 N.

- Force range: max. 500 N / 50 kg / 110 lb
- Travel path: max. 270 mm / 10.6"
- Feed speed: 1 ... 500 mm/min
- Manual or automatic procedure

Force gage
Digital force gage for tensile force measurement and compressive force measurement up to 500 N. The digital force gage is for precise measurements with a resolution of 0.1 N.

- Measuring range: 0 ... 500 N
- Accuracy: ± 0.1% of the measuring range
- Tensile and compressive force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Memory for 100 measurements
- 220V AC ONLY
Details
Force Gauge PCE-VTS 50-PFG 500-KIT incl. Test Stand
£ 1,807.00
Price excl. VAT &. delivery
2 year Warranty
The force gauge incl. test stand is a handy, digital measuring device for measuring tensile and compressive forces. The force gauge offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements. This kit contains a vertical materials test stand which is a motorized test station with a force range of up to 500 N.

- Measuring range: 0 ... 500 N
- Resolution: 0.1 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

Motorised Force Test Stand PCE-VTS 50
- Force range: 500 N / 50 kg / 110 lb
- Distance display resolution: 0.02 mm
- Resolution: 1 mm/min
- Tensile and compression testing
- Travel: 270 mm / 10.6"
- 220V AC ONLY
Details