Clamp-on Ultrasonic Flow Meter PCE-TDS 200 S-ICA incl. ISO-Calibration Certificate
£ 2,034.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Clamp-on Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Clamp-on Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
- Sensor for pipe diameter: DN 15 ... 100 / 20 ... 108 mm
- Sensor dimensions: 45 x 30 x 30 mm
- Temperature resistance from -30 ... 160 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity, volume flow and volume
- Interface: USB
- Data logger: 32 GB memory capacity (10 million measuring points)
- LiPo battery
incl. ISO-Calibration Certificate
Ultrasonic Flow Meter PCE-TDS 200 S-ICA incl. ISO-Calibration Certificate
£ 2,034.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the
ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
Pipe size: DN 15 ... 100 / 20 ... 108 mm
- Sensor dimensions: 45 x 30 x 30 mm
- Temperature resistance from -30 ... 160 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity,
  volume flow and volume
- Interface: USB
- Data logger: 10 million measuring points
- LiPo battery
incl. ISO-Calibration Certificate
Clamp-on Ultrasonic Flow Meter PCE-TDS 200+ S-SW-KIT incl. software
£ 2,728.00
Price excl. VAT &. delivery
2 year Warranty
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the
ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
Pipe size: DN 15 ... 100 / 20 ... 108 mm
- Sensor dimensions: 91 x 52 x 44 mm
- Temperature measurement up to 1800 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity,
  volume flow, volume
  temperature, heat output and heat quantity
- Interface: USB
- Cost display
- Data logger: 10 million measuring points
- LiPo battery
- incl. software
Environmental Tester PCE-LMD 200-LD-KIT incl. luminance accessory
£ 3,070.00
Price excl. VAT &. delivery
2 year Warranty
The environmental tester is a precise measuring instrument that fulfils the highest requirements for light measurements. In accordance with DIN 5032-7, it fulfils the requirements of precision class A, which enables accurate and reliable measurement of light intensities. With an impressive measuring range of 0.000 lux to 500,000 lux, the environmental tester is extremely versatile.

- Measuring range: 0.000 lx ... 500 klux
- Resolution: 0.001 lx
- Precision in accordance with DIN 5032-7
- Accuracy class: A
- External sensor
- 8 GB measured value memory
incl. luminance accessory
Thermometer PCE-TC 34N
£ 974.00
Price excl. VAT &. delivery
2 year Warranty
The thermometer has a resolution of 320 x 240 pixels. With a measuring range of -20 ... 300 °C, the thermometer already covers a large temperature range. The emission value of the thermometer can be set to carry out measurements on different surfaces.

- Measuring range: -20 ... 300 °C / -4 ... 572 °F
- Infrared and real image resolution: 320 x 240 pixels
- Picture in picture function
- USB-C interface
- Refresh rate: 9Hz
- Storage for about 20,000 images
Portable Ultrasonic Flow Meter PCE-TDS 200 M
£ 1,780.00
Price excl. VAT &. delivery
2 year Warranty
The Portable Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the
Portable Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
- Sensor for pipe diameters DN 50 ... 700 / 57 ... 720 mm
- Temperature resistance: -30 ... 160 °C
- for different media
- for different pipe materials
- Measuring parameters: Flow velocity, flow rate and volume
- Interface: USB
- Data logger: 32 GB memory capacity (10 million measuring points)
- LiPo battery
Light Meter PCE-LMD 200-LD-KIT incl. luminance accessory
£ 3,070.00
Price excl. VAT &. delivery
2 year Warranty
The light meter is a precise measuring instrument that fulfils the highest requirements for light measurements. In accordance with DIN 5032-7, it fulfils the requirements of precision class A, which enables accurate and reliable measurement of light intensities. With an impressive measuring range of 0.000 lux to 500,000 lux, the light meter is extremely versatile.

- Measuring range: 0.000 lx ... 500 klux
- Resolution: 0.001 lx
- Precision in accordance with DIN 5032-7
- Accuracy class: A
- External sensor
- 8 GB measured value memory
incl. luminance accessory
Thermometer PCE-G1
£ 974.00
Price excl. VAT &. delivery
2 year Warranty
The thermometer is intended for stationary measurement of relative humidity and temperature and direct display on a large display. This thermometer consists of an LED display (100 mm high) and is protected according to IP 54.

- Temperature measuring range: 0 ... +60 °C (Celsius only)
- Humidity measuring range: 10 ... 95 % RH
- Up to 50 m (164 ft) reading distance
- External sensor (wired)
Clamp-on Ultrasonic Flow Meter PCE-TDS 200 MR-ICA incl. ISO-Calibration Certificate
£ 2,323.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Clamp-on Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Clamp-on Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0,001 m/s
- incl. sensor set
- Sensor for pipe diameters DN 50 ... 700 / 57 ... 720 mm
- Temperature resistance: -30 ... 160 °C
- for different media
- for different pipe materials
- Measuring parameters: Flow velocity, flow rate and volume
- Interface: USB
- Data logger: 32 GB memory capacity (10 million measuring points)
- LiPo battery
incl. ISO-Calibration Certificate
Ultrasonic Flow Meter PCE-TDS 200 MR-ICA incl. ISO-Calibration Certificate
£ 2,323.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the
ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0,001 m/s
- incl. sensor set
Pipe size: DN 50 ... 700 / 57 ... 720 mm
- Temperature resistance: -30 ... 160 °C
- for different media
- for different pipe materials
- Measuring parameters: Flow velocity,
  flow rate and volume
- Interface: USB
- Data logger: 10 million measuring points
- LiPo battery
incl. ISO-Calibration Certificate
Thermometer PCE-G1A
£ 978.00
Price excl. VAT &. delivery
2 year Warranty
The thermometer is a measuring device for stationary measurement of relative humidity and temperature. This thermometer consists of an LED seven-segment display with a digit height of 100 mm, which enables you to read it very well even at a distance of up to 50 m.

- Temperature measuring range: 0 ... +60 °C (Celsius only)
- Humidity measuring range: 10 ... 95 % RH
- Up to 50 m (164 ft) reading distance
- External sensor (wired)
- Voltage supply: 230 V AC
- with analogue output 4 ... 20 mA
Clamp-on Ultrasonic Flow Meter PCE-TDS 200 SR-ICA incl. ISO-Calibration Certificate
£ 2,195.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Clamp-on Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Clamp-on Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
- Sensor for pipe diameters: DN 15 ... 100 / 20 ... 108 mm
- for different media
- for different pipe materials
- Measuring parameters: Flow velocity, volume flow and volume
- Interface: USB
- Data logger: 32 GB memory capacity (10 million measuring points)
- LiPo battery
incl. ISO-Calibration Certificate
Ultrasonic Flow Meter PCE-TDS 200 SR-ICA incl. ISO-Calibration Certificate
£ 2,195.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
Pipe size: DN 15 ... 100 / 20 ... 108 mm
- for different media
- for different pipe materials
- Measuring parameters: Flow velocity,
  volume flow and volume
- Interface: USB
- Data logger: Pipe size: DN10 million measuring points
- LiPo battery
incl. ISO-Calibration Certificate
Portable Ultrasonic Flow Meter PCE-TDS 200 S-SW-KIT incl. software
£ 1,887.00
Price excl. VAT &. delivery
2 year Warranty
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the
ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
Pipe size: DN 15 ... 100 / 20 ... 108 mm
- Sensor dimensions: 45 x 30 x 30 mm
- Temperature resistance from -30 ... 160 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity,
  volume flow and volume
- Interface: USB
- Data logger: 10 million measuring points
- LiPo battery
- incl. software
Portable Ultrasonic Flow Meter PCE-TDS 200 S-SW-KIT incl. software
£ 1,887.00
Price excl. VAT &. delivery
2 year Warranty
The Portable Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the
Portable Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

Measuring range: ±32 m/s
- Resolution: 0.001 m/s
Pipe size: DN 15 ... 100 / 20 ... 108 mm
- Sensor dimensions: 45 x 30 x 30 mm
- Temperature resistance from -30 ... 160 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity,
  volume flow and volume
- Interface: USB
- Data logger: 10 million measuring points
- LiPo battery
incl. software
Clamp-on Ultrasonic Flow Meter PCE-TDS 200 L-ICA incl. ISO Calibration Certificate
£ 2,127.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Clamp-on Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Clamp-on Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
- Sensor for pipe diameter DN 300 ... 6000 mm
- Sensor dimensions: 91 x 52 x 44 mm
- for different media
- for different pipe materials
- measuring parameters: flow velocity, flow rate and volume
- Interface: USB
- Data logger: 32 GB memory capacity (10 million measuring points)
- LiPo battery
- incl. ISO Calibration Certifikcate
Ultrasonic Flow Meter PCE-TDS 200 L-ICA incl. ISO Calibration Certificate
£ 2,127.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
Pipe size: DN 300 ... 6000 mm
- Sensor dimensions: 91 x 52 x 44 mm
- for different media
- for different pipe materials
- measuring parameters:
  flow velocity, flow rate and volume
- Interface: USB
- Data logger: 10 million measuring points
- LiPo battery
- incl. ISO Calibration Certificate
Clamp-on Ultrasonic Flow Meter PCE-TDS 200 M-ICA incl. ISO-Calibration Certificate
£ 2,034.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Clamp-on Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Clamp-on Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
- Sensor for pipe diameters DN 50 ... 700 / 57 ... 720 mm
- Temperature resistance: -30 ... 160 °C
- for different media
- for different pipe materials
- Measuring parameters: Flow velocity, flow rate and volume
- Interface: USB
- Data logger: 32 GB memory capacity (10 million measuring points)
- LiPo battery
- incl. ISO-Calibration Certificate