The pressure gauge is a robust, compact and comprehensive differential pressure measuring device for measuring pressure in 11 adjustable units. The pressure gauge is particularly suitable for the complete documentation of your measuring tasks.

- Measurement of differential pressure and relative pressure
- 11 selectable units: mbar, bar, psi, kPa, ...
- Measuring range from -140 to +140 mbar
- Min / max and average value display directly on the display
- USB interface
- Incl. ISO calibration certificate

PCE-917 is a portable handheld digital differential pressure gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-917 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 700 kPa / ± 101.5 psi / ± 7 bar
- Resolution: 500 Pa / 0.0725 psi / 0.005 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory

The pressure gauge PCE-P05-ICA is a robust, compact and comprehensive differential pressure measuring device for measuring pressure in 11 adjustable units. The differential pressure gauge is particularly suitable for the complete documentation of your measuring tasks.

- Measuring range from -344 ... +344 mbar
- Parameters:
   inH2O, psi, mbar, kPa, inHg, mmHg,
   ozin², ftH2O, cmH2O, kgcm², bar
- Backlight can be switched on/off
- Software with USB cable included
- Incl. ISO calibration certificate

The PCE-DDM 20 Force Gauge is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 20 Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

- Measurement range: 20,000 kg / 200 kN / 44,092 lbs
- Resolution: 10 kg / 100 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

The pressure gauge records the air temperature as well as the relative humidity and the barometric pressure and saves them internally on an SD card. The compact device with a large memory (up to max. 16 GB SDHC card) is primarily used for long-term registration in the food sector (refrigerated counters in department stores, refrigerated transports, warehouses) as well as for measurement and recording in industry (heating and cooling processes, machine temperatures, product storage, etc.).

Measuring ranges
- Temperature: 0 ... 50 °C /  32 ... 122 °F
- Relative humidity: 10 ... 90% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar)
- Selectable pressure unit: hPa, mmHg and inHg
- Real-time data storage

PCE-910 is a portable handheld digital differential pressure gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
- Resolution: 100 Pa / 0.0145 psi / 0.001 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory

The force gauge is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the force gauge. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 20,000 kg / 200 kN / 44,092 lb
- Resolution: 10 kg / 100 N / 22 lb
- Minimum load: 200 kg / 440 lb
- Supplied with remote control indicator
- incl. ISO Calibration Certificate

- Weighing range: 25,000 kg / 55,115 lb
- Resolution: 10 kg / 22 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook

The PCE-THB 38 Pressure Gauge is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the Pressure Gauge is sent out manufacturer calibrated. An ISO certification is available optionally.

The pressure meter PCE-PDA 01L is a reliable differential pressure gauge for pressure measurement of gasses in the range of ± 200 Pa. The pressure meter PCE-PDA 01L has many different pressure measuring functions.

- Measuring range: ± 200 Pa  / 0.029 psi / 0.002 bar
- Resolution: 0.1 Pa / 0.0000145 psi / 0.000001 bar
- Accuracy: ± 1% of final value
- Min and Max value memory
- Data logger and leak test
- Temperature measurement, flow measurement

- Weighing range: 30,000 kg / 66,138 lb
- Resolution: 20 kg / 44 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook
- incl. ISO Calibration Certificate

The pressure gauge PCE-P05 is a robust, compact and comprehensive differential pressure measuring device for measuring pressure in 11 adjustable units. The differential pressure gauge is particularly suitable for the complete documentation of your measuring tasks.

- Measuring range from -344 ... +344 mbar
- Parameters:
   inH2O, psi, mbar, kPa, inHg, mmHg,
   ozin², ftH2O, cmH2O, kgcm², bar
- Backlight can be switched on/off
- Software with USB cable included

- Measuring range: 0 ... 10 kN / 10,000 N / 2245 lbs
- Resolution: 1 N / 0.22 lb
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

- Measuring range: 0 ... 20 kN / 20,000 N / 4,500 lbs
- Resolution: 2 N / 0.5 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

The PCE-DDM 20WI Force Gauge is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 20WI Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

- Measurement range: 20,000 kg / 200 kN / 44,092 lbs
- Resolution: 10 kg / 100 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control indicator