The 4-channel PCE-VM 5000 Vibration Analyzer performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration analyzer is able to record vibrations at different points of the component to be tested.

- Frequency range: 10 Hz ... 1 kHz
- Measurement of acceleration, velocity and displacement
- Connection of up to 4 sensors simultaneously
- Data storage on SD card
- Including 2 additional sensors for vibration

The class 2 data logging decibel meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The decibel meter is a class 2 device and is equipped with an octave band frequency filter. The decibel meter can optionally be upgraded with a 1/3 octave band filter.

- Accuracy class 2
- 1/1 octave band included
- 1/3 octave band optional
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- Including class II sound calibrator
- Including calibration certificate for sound level meter
- Including calibration certificate for sound calibrator

The class 2 data logging SPL meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The SPL meter is a class 2 device and is equipped with an octave band frequency filter. The SPL meter can optionally be upgraded with a 1/3 octave band filter.

- Accuracy class 2
- 1/1 octave band included
- 1/3 octave band optional
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- Including class II sound calibrator
- Including calibration certificate for sound level meter
- Including calibration certificate for sound calibrator

The condition monitoring sound level meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The condition monitoring sound level meter is a class 2 device and is equipped with an octave band frequency filter. The condition monitoring sound level meter can optionally be upgraded with a 1/3 octave band filter.

- Accuracy class 2
- 1/1 octave band included
- 1/3 octave band optional
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- Including class II sound calibrator
- Including calibration certificate for sound level meter
- Including calibration certificate for sound calibrator

- Measuring width: 0 ... 999,999 RLU
- Fast hygiene tests in just 10 seconds
- USB and Bluetooth printer option
- Automatic calibration
- For HACCP implementation
- Data storage
- Enables rapid detection of bacterial or microbial residue
- Incl. 100 Test tubes or swabs

This sound level meter kit includes gauges for demanding applications with advanced functionality. The sound level meter kit has been specially formulated to meet all requirements with regard to the assessment of the environment. With these devices, the recorded values are saved and can then be evaluated on a PC or laptop. The sound level meter meter kit consists of the following devices:

- P1 / PCE-322A (Class 2)
- P2 / PCE-890U
- P3 / PCE-174
- P4 / PCE-330

 

The 4-channel PCE-VM 5000 Vibration Recorder performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration recorder is able to record vibrations at different points of the component to be tested.

- Frequency range: 10 Hz ... 1 kHz
- Measurement of acceleration, velocity and displacement
- Connection of up to 4 sensors simultaneously
- Data storage on SD card
- Including 2 additional sensors for vibration
- Including ISO Calibration Certificate

The 4-channel PCE-VM 5000 vibration data logger performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration data logger is able to record vibrations at different points of the component to be tested.

- Frequency range: 10 Hz ... 1 kHz
- Measurement of acceleration, velocity and displacement
- Connection of up to 4 sensors simultaneously
- Data storage on SD card
- Including 2 additional sensors for vibration

The 4-channel PCE-VM 5000 Accelerometer performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the accelerometer is able to record vibrations at different points of the component to be tested.

- Frequency range: 10 Hz ... 1 kHz
- Measurement of acceleration, velocity and displacement
- Connection of up to 4 sensors simultaneously
- Data storage on SD card
- Including 2 additional sensors for vibration
- Including ISO Calibration Certificate

PCE-TDS 100HSH is a portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 700, 20 … 720 mm
- Sensor temperature range: 32 ... 320°F
- Sensor installation: V, (N,W)
- incl. sensors TDS-M1 and TDS-S1

- Measuring width: 0 ... 999,999 RLU
- Fast hygiene tests in just 10 seconds
- USB and Bluetooth printer interface
- Automatic calibration
- For HACCP implementation
- Data storage
- Enables rapid detection of bacterial or microbial residue
- Incl. 100 Test tubes (swabs)

PCE-SLT is a class II (type 2) sound level, sound pressure level (SPL), decibel (dB), sound or noise meter with audible or visual alarm output capability. PCE-SLT is used for long-term, continuous monitoring of occupational noise exposure limits in industrial environments. AC powered.

- Measuring range: 30 ... 130 dB in 3 ranges
- Resolution: 0.1 dB
- Accuracy: ±1.5 dB
- Class 2 and frequency weighting: A
- Output: 4 ... 20-mA and alarm relay output of 5 A / up to 240V AC
- IP 54 ingress protection rating on transmitter
- Includes digital indicator with IP 65 rating

 

The data logging decibel meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The decibel meter is a class 2 device and is equipped with an octave band frequency filter. The decibel meter can optionally be upgraded with a 1/3 octave band filter.

- Accuracy class 2
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Including class II sound calibrator

The data logging SPL meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The SPL meter is a class 2 device and is equipped with an octave band frequency filter. The SPL meter can optionally be upgraded with a 1/3 octave band filter.

- Accuracy class 2
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Including class II sound calibrator

Our motorized tension dynamometer test stand can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The motorized tension dynamometer test stand lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized tension dynamometer test stand offers the operator the most precise equality of test bench and sample.

- Force range: max. 5000 N / 500 kg / 1100 lbs
- Travel: max. 300 mm / 11.8"
- Feed speed: 30 ... 230 mm/min / 1.18 ... 9.05 in/min
- Manual or automatic procedure
- incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"

*** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

The condition monitoring sound level meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The condition monitoring sound level meter is a class 2 device and is equipped with an octave band frequency filter. The sound level meter can optionally be upgraded with a 1/3 octave band filter.

- Accuracy class 2
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Including class II sound calibrator