Products for 'Noise Dose Meter PCE MSM 4 ICA incl. ISO Calibration Certificate '

HVAC Meter PCE-TDS 100HMHS-ICA incl. ISO Calibration Certificate

£ 2,305.00

Price excl. VAT &. delivery
2 year Warranty

The HVAC meter is required as part of a control measurement or to quickly determine the flow in a pipeline and is a portable / easy-to-install measuring system. The HVAC meter works according to the transit time difference method. The measuring principle of the HVAC meter is quite simple.

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe sizes: 50 … 720 mm (approx. 1.9 … 28")
20 …108 mm (approx. 0.8 … 4.2")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. sensors TDS-HM and TDS-HS on rails
- Incl. ISO Calibration Certificate

Noise Dose Meter (Badge Type) PCE-MND 10

£ 885.00

Price excl. VAT &. delivery
2 year Warranty

The noise dose meter (badge type) was specially developed for measuring noise exposure in workplaces and complies with the IEC 61252:2002 standard. With a measuring range of 70 … 140 dB and a frequency weighting of A, B and Z, the sound dosimeter is ideal for this.

- Measuring range: 70 ... 140 dB
- Frequency weighting: A, B and Z
- Battery life: >15 hours
- LEQ measurement
- Memory
- USB interface
- Battery / power supply
- Software download
- Standards: IEC 61252:2002, ANSI S1.25-1991

Ultrasonic Flow Meter PCE-TDS 200 SML-ICA incl. ISO-Calibration Certificate

£ 3,115.00

Price excl. VAT &. delivery
2 year Warranty

The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- incl. 4 sensors

- Pipe size:
DN 20 ... 108 mm / 50 ... 700 mm,
DN 315 ... 6000 mm

- Temperature resistance: -30 ... 160 °C

- for different media

- for different pipe materials

- Measuring parameters: Flow velocity,
volume flow and volume

- Interface: USB

- Data logger: 10 million measuring points

- LiPo battery
- incl. ISO-Calibration Certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 200 SML-ICA incl. ISO-Calibration Certificate

£ 3,115.00

Price excl. VAT &. delivery
2 year Warranty

The Clamp-on Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Clamp-on Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- incl. 4 sensors

- Sensor for pipe diameters DN 20-108 mm / 50-700 mm / 315-6000 mm

- Temperature resistance: -30 ... 160 °C

- for different media

- for different pipe materials

- Measuring parameters: Flow velocity, volume flow and volume

- Interface: USB

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO-Calibration Certificate

Vibration Recorder PCE-VM 5000-ICA Incl. ISO Calibration Certificate

£ 2,293.00

Price excl. VAT &. delivery
2 year Warranty

The 4-channel PCE-VM 5000-ICA Vibration Recorder performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration measuring device is able to record vibrations at different points of the component to be tested.

- 4 channels / inputs
- Frequency range: 10 Hz ... 1 kHz
- Measurement of acceleration, velocity, displacement
- Connection of up to 4 sensors simultaneously, 2 included
- Data storage on SD card
- Sampling rate: minimum 1 sec.
- Incl. ISO calibration certificate

Class 2 Data Logging Noise Meter / Sound Meter PCE-428-ICA incl. ISO Cal. Cert.

£ 1,081.00

Price excl. VAT &. delivery
2 year Warranty

PCE-428 is a class 2 data logging noise meter / sound meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy noise meter / sound meter has a large easy-to-read illuminated LCD screen that displays the sound pressure level (SPL) numerically and graphically in real time. The noise meter / sound meter calculates the equivalent continuous sound level Leq (LXeq).

- Measuring range: 25 ... 136 db(A)
- LXY (SPL), Leq (LXeq), LXYSD, LXSEL, LXE, LXYmax, LXYmin, LXPeak, LXN
- Frequency weighting: A, B, C and Z
- Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
- adjustable data-recording interval from 1 s ... 24 h
- 1/1 octave band filter (optional 1/3 octave band filter upgrade)
- incl. ISO Calibration Certificate

Profilometer PCE-RT 2300-ICA Incl. ISO Calibration Certificate

£ 2,251.00

Price excl. VAT &. delivery
2 year Warranty

The profilometer PCE-RT 2300 is used to measure the roughness of surfaces. The PCE-RT 2300 profilometer tester has a detachable motorized sensor that allows the material tester to determine the surface profile roughness even on small or narrow profiles. Free software download for remote test control and data save to Windows PC and memory for 100 records of internal data.

- Large measuring range: Rz: 0.02 μm ... 320 μm; Ra, Rq: 0.005 μm ... 32 μm
- Accuracy of ± 10% and repeat accuracy of ± 6%
- Touchscreen configuration and Android/printer bluetooth connectivity
- Sensor has diamond test head with 90-degree cone angle
- Optional sensors and extension rod for small holes and curved surfaces
- Incl. ISO calibration certificate

Material Tester PCE-RT 2300-ICA Incl. ISO Calibration Certificate

£ 2,251.00

Price excl. VAT &. delivery
2 year Warranty

The material tester PCE-RT 2300 is used to measure the roughness of surfaces. The PCE-RT 2300 material tester has a detachable motorized sensor that allows the material tester to determine the surface roughness even on small or narrow profiles. Free software download for remote test control and data save to Windows PC and memory for 100 records of internal data.

Clamp on Tester PCE-PA 8500-ICA incl. ISO-Calibration Certificate

£ 3,302.00

Price excl. VAT &. delivery
2 year Warranty

The clamp on tester redefines standards in electrical measurement technology, offering a comprehensive range of features for precise and detailed measurements. The clamp on tester allows accurate measurements of electrical voltage, current, frequency, harmonics, and starting currents. In addition, precise power and energy measurements can be performed, enabling accurate monitoring and optimization of energy consumption.

- Voltages: 1 ... 1000 V

- Current: 15 ... 3000 A AC

- Graphical representation of waveform and vector graphics

- Data logger with 8 GB storage

- LAN and USB data interface

- Includes flexible current clamps

- Compliance with standards: IEC61000-4-30, 61000-4-15,

61000-4-7, EN50160

- incl. ISO-Calibration Certificate

Power Meter PCE-360-ICA incl. ISO Calibration Certificate

£ 1,753.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.

- Measuring range: 10 ... 999.9 V
- AC voltage AC
- Alternating current AC
- Active power
- Power factor
- Phase angle
- Frequency
- Harmonic measurement
- Data memory: 512 kB
(non-volatile memory)
- incl. 4 current clamps / tapping terminals
- Standards: IP 30 / IEC 61 010, 600 V / CAT III
- incl. ISO Calibration Certificate
- incl. ISO Calibration Certificate

Clamp Meter PCE-360-ICA incl. ISO Calibration Certificate

£ 1,753.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.

Noise Meter PCE-SLD 10-ICA Incl. ISO Calibration Certificate

£ 400.00

Price excl. VAT &. delivery
2 year Warranty

The noise meter PCE-SLD 10 is used for permanent monitoring of the sound level. In addition to storing the measured values, the PCE-SLD 10 noise meter is able to display the measured values on a display and output them as a 4 ... 20-mA analog value.

- Measuring range: 30 ... 130 dB
- Measurement accuracy: Based on class 2 according to IEC61672
- Resolution: 0.1 dB
- LC display
- SD card memory up to 16 GB
- external microphone
- Analog output with 4 ... 20-mA
- Incl. ISO calibration certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 200+ SR-ICA incl. ISO-Calibration Certificate

£ 3,040.00

Price excl. VAT &. delivery
2 year Warranty

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Sensor for pipe diameters DN 15 ... 100 / 20 ... 108 mm

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- Measuring parameters: flow velocity, volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO-Calibration Certificate

Ultrasonic Flow Meter PCE-TDS 200+ SR-ICA incl. ISO-Calibration Certificate

£ 3,040.00

Price excl. VAT &. delivery
2 year Warranty

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Pipe size: DN 15 ... 100 / 20 ... 108 mm

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- Measuring parameters: flow velocity,
volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 10 million measuring points

- LiPo battery
- incl. ISO-Calibration Certificate

Portable Ultrasonic Flow Meter PCE-TDS 200+ SR-ICA incl. ISO Calibration Certificate

£ 3,040.00

Price excl. VAT &. delivery
2 year Warranty

The Portable Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Portable Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s

- Resolution: 0.001 m/s

- Sensor for pipe diameters DN 15 ... 100 / 20 ... 108 mm

- Temperature measurement up to 1800 °C

- for different media

- for different pipe materials

- Measuring parameters: flow velocity, volume flow, volume

temperature, heat output and heat quantity

- Interface: USB

- Cost display

- Data logger: 32 GB memory capacity (10 million measuring points)

- LiPo battery
- incl. ISO Calibration Certificate

Vibration Recorder PCE-VM 22-ICA incl. ISO Calibration Certificate

£ 2,534.00

Price excl. VAT &. delivery
2 year Warranty

The vibration recorder has a measuring range of 0 ... 200 m/s² for acceleration. In addition to acceleration, the vibration recorder can also perform speed, displacement, frequency and an ISO 18016-3 measurement.

- Acceleration
- Velocity
- Displacement
- Frequency
- Tachometer
- Infrared temperature measurement
- 4 GB data memory
- FFT analysis and wave view of the vibration
- incl. ISO Calibration Certificate

Class 1 Decibel Meter PCE-432-SC 09-ICA with Calibrator incl. ISO Cal. Cert.

£ 2,542.00

Price excl. VAT &. delivery
2 year Warranty

The Class 1 Decibel Meter meets all requirements for noise measurement and frequency analysis. In addition to the sound measurement function, the Decibel Meter is equipped with a GPS receiver. The GPS function allows the user to assign the measured values to an exact position.

- Accuracy class 1
- GPS function
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Incl. Class 1 sound calibrator
- Incl. ISO Calibration Certificate (for sound calibrator)

Current Clamp PCE-PA 8500-ICA incl. ISO-Calibration Certificate

£ 3,302.00

Price excl. VAT &. delivery
2 year Warranty

The current Clamp redefines standards in electrical measurement technology, offering a comprehensive range of features for precise and detailed measurements. The current Clamp allows accurate measurements of electrical voltage, current, frequency, harmonics, and starting currents. In addition, precise power and energy measurements can be performed, enabling accurate monitoring and optimization of energy consumption.

- Voltages: 1 ... 1000 V

- Current: 15 ... 3000 A AC

- Graphical representation of waveform and vector graphics

- Data logger with 8 GB storage

- LAN and USB data interface

- Includes flexible current clamps

- Compliance with standards: IEC61000-4-30, 61000-4-15,

61000-4-7, EN50160

- incl. ISO-Calibration Certificate