Air Humidity Meter PCE-AQD 10
£ 399.00
Price excl. VAT &. delivery
2 year Warranty
The air humidity meter is used to measure air quality. The air humidity meter measures carbon dioxide, temperature and humidity. The CO2 sensor of the air humidity meter is disconnected from the main unit with a connection cable.

- Measuring range: 0 ... 4000 ppm
- Measuring range: 10 ... 90% RH
- Measuring range: 0 ... 50 °C / 32 ... 122 °F
- Memory on SD card
- 3 parameters of air quality
- CO2, air temperature and humidity
Air Humidity Meter PCE-G1
£ 974.00
Price excl. VAT &. delivery
2 year Warranty
The air humidity meter is intended for stationary measurement of relative humidity and temperature and direct display on a large display. This air humidity meter consists of an LED display (100 mm high) and is protected according to IP 54.

- Temperature measuring range: 0 ... +60 °C (Celsius only)
- Humidity measuring range: 10 ... 95 % RH
- Up to 50 m (164 ft) reading distance
- External sensor (wired)
Data Logger for Temperature and Humidity Set PCE-HT71N-10
£ 739.00
Price excl. VAT &. delivery
2 year Warranty

The data logger for temperature and humidity detects air temperature and humidity and stores readings to its internal memory. This data logger for temperature and humidity is compact and has enough memory to store up to 32,000 readings, 16,000 for each parameter, and is used above all as a data logger, in supermarket refrigeration units, refrigerated transport, warehouses and other temperature controlled environments. These temperature and humidity logging test instruments are manufacturer calibrated. An ISO calibration certificate is an option.


- Measurement range: 0 ... 100% RH / -35 ... 80°C / -31 ... 176°F
- Accuracy: ± 3% RH (20 ... 80%) and  ± 5% / ± 1°C (1.8°F)
- Resolution: 0.5% RH / 0.1°C (0.18°F)
- Memory: Max. 32,000 measurement data (16,000 for each parameter (humidity / temperature))

Relative Humidity Meter PCE-G1
£ 974.00
Price excl. VAT &. delivery
2 year Warranty
The relative humidity meter is intended for stationary measurement of relative humidity and temperature and direct display on a large display. This relative humidity meter consists of an LED display (100 mm high) and is protected according to IP 54.

- Temperature measuring range: 0 ... +60 °C (Celsius only)
- Humidity measuring range: 10 ... 95 % RH
- Up to 50 m (164 ft) reading distance
- External sensor (wired)
Surface Testing - Colorimeter PCE-CSM 10
£ 5,606.00
Price excl. VAT &. delivery
2 year Warranty

The colorimeter PCE-CSM 10 was developed for quality control, offers a high accuracy and comes with a 3.5" touch screen display. You can choose between different color spaces like CIE L*A*B, XYZ, Yxy, LCh, LUV, LCH, LAB &WI &YI, Color Fastness, and Staining Fastness. 400 to 700 nm photodiode array for 10 nm wavelength increments with Reflectance Curve graph. 


CIE L*A*B/LCh, CIE XYZ/Yxy, CIE LUV/LCH, LAB &WI &YI, Color Fastness, and Color Staining 
- Measuring geometry 10° or 2°/d
- Black and white calibration
- Opacity, 18 light source options, metameric index, CIE 1976/1994/2000
- 1000 Standards, 15,000 sample memory

Humidity Detector PCE-HVAC 3S
£ 227.00
Price excl. VAT &. delivery
2 year Warranty
The humidity detector PCE-HVAC 3S is a multifunctional diagnostic device for climate testing. In addition to the ambient humidity and room temperature, the humidity detector also determines the dew point and wet bulb temperature in °C and °F.

- Measuring ranges
   Air humidity: 0 ... 100% RH
   Absolute humidity: 0 ... 500 g/m³
   Temperature: -30 ... 100°C / -22 ... 212°F
   Dew point temperature: -30 ... 100°C / -22 ... 212°F
   Wet bulb temperature: 0 ... 80°C / 32 ... 176°F
- Accuracy
   Humidity: ± 2% (40 ... 60% RH)
   Temperature: ± 0.5°C / 0.9°F (20 ... 60°C / 68 ... 140°F)
- HOLD and extreme value display
- Including sinter filter
Humidity Detector PCE-VDL 16I
£ 222.00
Price excl. VAT &. delivery
2 year Warranty
The humidity detector PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this humidity detector is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Temperature, Humidity, Air pressure, Vibration, and Light

Radiation Detector PCE-RAM 10
£ 389.00
Price excl. VAT &. delivery
2 year Warranty
Wireless

The radiation detector measures α-, β-, γ- and X-rays and offers a high measurement accuracy and convenient design. Using the integrated Bluetooth interface in the radiation detector, the measured values can be sent in real time to a PC and analyzed with the included PC software.


- α-, β-, γ- and X-rays
- Bluetooth interface
- Internal memory
- PC software included

 

Paint Test Equipment PCE-CSM 10
£ 5,606.00
Price excl. VAT &. delivery
2 year Warranty

The paint test equipment was developed for quality control, offers a high accuracy and comes with a 3.5" touch screen display. You can choose between different color spaces like CIE L*A*B, XYZ, Yxy, LCh, LUV, LCH, LAB &WI &YI, Color Fastness, and Staining Fastness. 400 to 700 nm photodiode array for 10 nm wavelength increments with Reflectance Curve graph. 


CIE L*A*B/LCh, CIE XYZ/Yxy, CIE LUV/LCH, LAB &WI &YI, Color Fastness, and Color Staining 
- Measuring geometry 10° or 2°/d
- Black and white calibration
- Opacity, 18 light source options, metameric index, CIE 1976/1994/2000
- 1000 Standards, 15,000 sample memory

Gas Leak Detector PCE-LDC 20
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The gas leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
Gas Leak Detector PCE-AQD 10
£ 399.00
Price excl. VAT &. delivery
2 year Warranty
The gas leak detector PCE-AQD 10 is used to measure air quality. The gas leak detector measures carbon dioxide, temperature and humidity. The CO2 sensor from the gas leak detector is disconnected from the main unit with a connection cable.

- Measuring range: 0 ... 4000 ppm
- Measuring range: 10 ... 90% rh
- Measuring range: 0 ... 50°C / 32 ... 122°F
- Memory on SD card
- 3 parameters of air quality
- CO2, air temperature and humidity
Ultrasonic Leak Detector PCE-LDC 20
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The ultrasonic leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
Datalogging Humidity Detector PCE-HT110
£ 213.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-HT110 Humidity Detector precisely measures air temperature and relative humidity. This accurate and reliable device shows the current measurements on the large LCD display and saves the measurement data directly to an SD card (included). The PCE-HT110 is equipped with two channels, accommodates an SD card memory of up to 16 GB, offers an adjustable measurement rate / sampling interval, and includes a wall mount, making the device ideal for logging data over an extended period of time.


- Measurement ranges: 0 … 50°C / 32 ... 122°F, 10 ... 90% RH
- Resolution: 0.1°C / 0.18°F, 0.1% RH
- Data format: .XLS (compatible with Microsoft Excel)

Air Humidity Meter PCE-G1A
£ 978.00
Price excl. VAT &. delivery
2 year Warranty
The air humidity meter is a measuring device for stationary measurement of relative humidity and temperature. This air humidity meter consists of an LED seven-segment display with a digit height of 100 mm, which enables you to read it very well even at a distance of up to 50 m.

- Temperature measuring range: 0 ... +60 °C (Celsius only)
- Humidity measuring range: 10 ... 95 % RH
- Up to 50 m (164 ft) reading distance
- External sensor (wired)
- Voltage supply: 230 V AC
- with analogue output 4 ... 20 mA
Gas Detector PCE-AQD 10-ICA incl. ISO Calibration Certificate
£ 498.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The gas detector is used to measure air quality. The gas detector measures carbon dioxide, temperature and humidity. The CO2 sensor of the gas detector is disconnected from the main unit with a connection cable.

- Measuring range: 0 ... 4000 ppm
- Measuring range: 10 ... 90% RH
- Measuring range: 0 ... 50 °C / 32 ... 122 °F
- Memory on SD card
- 3 parameters of air quality
- CO2, air temperature and humidity
- incl. ISO Calibration Certificate (for CO2 only)
Radiation Detector PCE-LMD 200-LD-KIT incl. luminance accessory
£ 3,070.00
Price excl. VAT &. delivery
2 year Warranty
The radiation detector is a precise measuring instrument that fulfils the highest requirements for light measurements. In accordance with DIN 5032-7, it fulfils the requirements of precision class A, which enables accurate and reliable measurement of light intensities. With an impressive measuring range of 0.000 lux to 500,000 lux, the radiation detector is extremely versatile.

- Measuring range: 0.000 lx ... 500 klux
- Resolution: 0.001 lx
- Precision in accordance with DIN 5032-7
- Accuracy class: A
- External sensor
- 8 GB measured value memory
incl. luminance accessory
Humidity Detector PCE-PMI 3
£ 225.00
Price excl. VAT &. delivery
2 year Warranty
The humidity detector is a small and reliable measuring instrument for the determination of existing moisture in, for example, concrete and wood. Corresponding scales for measuring moisture are already stored in the library of the moisture meter.

- Relative scale: 0.0 ... 99.9%
- Accuracy: ± 0.5%
- Resolution: 0.1%
- For measurements on wood and concrete
- Individually adjustable alarm limits
- Setting in CM% possible
- Numerical and graphical view
- Results are delivered by Carbit method
Relative Humidity Meter PCE-AQD 10
£ 399.00
Price excl. VAT &. delivery
2 year Warranty
The relative humidity meter is used to measure air quality. The relative humidity meter measures carbon dioxide, temperature and humidity. The CO2 sensor of the relative humidity meter is disconnected from the main unit with a connection cable.

- Measuring range: 0 ... 4000 ppm
- Measuring range: 10 ... 90% RH
- Measuring range: 0 ... 50 °C / 32 ... 122 °F
- Memory on SD card
- 3 parameters of air quality
- CO2, air temperature and humidity