The multifunction temperature meter determines the wind speed via an impeller with a diameter of 65 mm. The temperature meter can reliably determine the speed in a measuring range of 0.3 ... 45.0 m/s.

- Measuring range: 0.3 ... 45.0 m/s / 0.9 ... 147 ft/s
- Velocity and volume flow measurement
- Telescopic probe with a length of 270 ... 540 mm / 10.63 … 21.26“
- Impeller opening of 65 mm / 2.5"
- Interface: Micro USB
- Data memory: 960 measured values

The multifunction thermo hygrometer determines the wind speed via an impeller with a diameter of 65 mm. The thermo hygrometer can reliably determine the speed in a measuring range of 0.3 ... 45.0 m/s.

- Measuring range: 0.3 ... 45.0 m/s / 0.9 ... 147 ft/s
- Velocity and volume flow measurement
- Telescopic probe with a length of 270 ... 540 mm / 10.63 … 21.26“
- Impeller opening of 65 mm / 2.5"
- Interface: Micro USB
- Data memory: 960 measured values

The multifunction wind measurer determines the wind speed via an impeller with a diameter of 65 mm. The wind measurer can reliably determine the speed in a measuring range of 0.3 ... 45.0 m/s.

- Measuring range: 0.3 ... 45.0 m/s / 0.9 ... 147 ft/s
- Velocity and volume flow measurement
- Telescopic probe with a length of 270 ... 540 mm / 10.63 … 21.26“
- Impeller opening of 65 mm / 2.5"
- Interface: Micro USB
- Data memory: 960 measured values

The multifunction wind speed meter determines the wind speed via an impeller with a diameter of 65 mm. The wind speed meter can reliably determine the speed in a measuring range of 0.3 ... 45.0 m/s.

- Measuring range: 0.3 ... 45.0 m/s / 0.9 ... 147 ft/s
- Velocity and volume flow measurement
- Telescopic probe with a length of 270 ... 540 mm / 10.63 … 21.26“
- Impeller opening of 65 mm / 2.5"
- Interface: Micro USB
- Data memory: 960 measured values

The PCE-830 3-Phase Power Meter / 3-Phase Power Analyzer is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Power Meter / 3-Phase Power Analyzer also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.

- PCE-830 + PCE-6802 amp clamp (1000 A)
- Electrical conductor pick-up: 55 mm / 2.2 in diameter
- Range selection: manual (10 A, 100 A, 1000 A)
- Clamp dimensions: 244 x 97 x 46 mm / 9.6 x 3.8 x 1.8 in
- Incl. ISO calibration certificate

The data logger for temperature and humidity determines the wind speed via an impeller with a diameter of 65 mm. The data logger for temperature and humidity can reliably determine the speed in a measuring range of 0.3 ... 45.0 m/s.

- Measuring range: 0.3 ... 45.0 m/s / 0.9 ... 147 ft/s
- Velocity and volume flow measurement
- Telescopic probe with a length of 270 ... 540 mm / 10.63 … 21.26“
- Impeller opening of 65 mm / 2.5"
- Interface: Micro USB
- Data memory: 960 measured values

The multifunction air velocity meter determines the wind speed via an impeller with a diameter of 65 mm. The air velocity meter can reliably determine the speed in a measuring range of 0.3 ... 45.0 m/s.

- Measuring range: 0.3 ... 45.0 m/s / 0.9 ... 147 ft/s
- Velocity and volume flow measurement
- Telescopic probe with a length of 270 ... 540 mm / 10.63 … 21.26“
- Impeller opening of 65 mm / 2.5"
- Interface: Micro USB
- Data memory: 960 measured values

The multifunction humidity detector determines the wind speed via an impeller with a diameter of 65 mm. The humidity detector can reliably determine the speed in a measuring range of 0.3 ... 45.0 m/s.

- Measuring range: 0.3 ... 45.0 m/s / 0.9 ... 147 ft/s
- Velocity and volume flow measurement
- Telescopic probe with a length of 270 ... 540 mm / 10.63 … 21.26“
- Impeller opening of 65 mm / 2.5"
- Interface: Micro USB
- Data memory: 960 measured values

The multifunction relative humidity meter determines the wind speed via an impeller with a diameter of 65 mm. The relative humidity meter can reliably determine the speed in a measuring range of 0.3 ... 45.0 m/s.

- Measuring range: 0.3 ... 45.0 m/s / 0.9 ... 147 ft/s
- Velocity and volume flow measurement
- Telescopic probe with a length of 270 ... 540 mm / 10.63 … 21.26“
- Impeller opening of 65 mm / 2.5"
- Interface: Micro USB
- Data memory: 960 measured values

The roughness tester PCE-RT 2000-ICA is used for accurate measurement of surface roughness. The roughness tester can be used on all surfaces. The roughness is measured precisely with the roughness measuring device via the piezo probe.

- Measuring ranges Ra, Rq, Rc: 0.005 µm ... 16 µm / 0.197 µinch ... 629.9 µinch
- Measurement accuracy: <± 10%
- Micro USB interface
- 3 different cut-off wavelengths
- PC software
- incl. ISO Calibration Certificate

The PCE-830-3 Data Logging Instrument is used for measuring one to three phases of electrical quantities for alternating current (AC). This Data Logging Instrument also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.

- PCE-830 + PCE-3007 flexible amp clamp (3000A)
- Electrical conductor pick-up: 170 mm / 6.7 in diameter
- Minimum radial curve: 35 mm / 1.4 in
- Length of electrical conductor: 610 mm / 24 in
- Sampling rate: 2 sec.
- Memory size: 512 kB / max. 52,420 data (1 phase)
- Incl. ISO calibration certificate