Products for 'Light Meter PCE TT 100 '

£ 4,138.00

Price excl. VAT &. delivery
2 year Warranty

The state-of-the-art particle counter enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the particle counter is done by an internal pump.

- Real-time measurement from 0.3 μm ... 10 μm

- Output in particles/28.3L or particles/m³

- Visual and audible alarm
when threshold value is exceeded

- Modbus RTU and MQTT via RS485

- Temperature and humidity measurement
- Real-time display of clean room class
ISO 14644-1

Material Tester PCE-UCD 100

£ 4,445.00

Price excl. VAT &. delivery
2 year Warranty

The material testing device sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this material testing device enables accurate verification of concrete piles, concrete beams, and other components. This innovative material testing device not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.

- Measurement range: -1677700 µs to +1677700 µs

- Resolution: 0.05 µs

- Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks

- Includes a camera for measuring crack width

- Bandwidth: 1 to 500 kHz

- Display: 10.1" TFT touchscreen display

- Internal storage: 8 GB

Gloss Meter PCE-PGM 100

£ 1,279.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-PGM 100 gloss meter works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the gloss meter emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.

- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU

Air Quality Particle Counting PCE-CPC 100

£ 4,138.00

Price excl. VAT &. delivery
2 year Warranty

The state-of-the-art air quality particle counting enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the air quality particle counting is done by an internal pump.

- Real-time measurement from 0.3 μm ... 10 μm

- Output in particles/28.3L or particles/m³

- Visual and audible alarm
when threshold value is exceeded

- Modbus RTU and MQTT via RS485

- Temperature and humidity measurement
- Real-time display of clean room class
ISO 14644-1

HVAC Meter PCE-VE 1500-38209

£ 20,670.00

Price excl. VAT &. delivery
2 year Warranty

With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.

- Endoscope cable length: approx. 2 m / 6.5 ft
- Diameter: 3.8mm / 0.15"
- Camera resolution 160,000 pixels each
- Viewing angle front camera 120°, side camera 90°
- Focusing distance 5 … 50 mm / 0.19 ... 1.96" each
- Camera head length: 42 mm / 1.6"
- Bending radius at 90° 35 mm / 1.3"
- Live images from both cameras side by side
- 7" touch screen for easy operation
- Replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

Airborne Particle-Counting Hygiene PCE-CPC 100

£ 4,138.00

Price excl. VAT &. delivery
2 year Warranty

The state-of-the-art airborne particle-counting hygiene enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the airborne particle-counting hygiene is done by an internal pump.

- Real-time measurement from 0.3 μm ... 10 μm

- Output in particles/28.3L or particles/m³

- Visual and audible alarm
when threshold value is exceeded

- Modbus RTU and MQTT via RS485

- Temperature and humidity measurement
- Real-time display of clean room class
ISO 14644-1

NDT Test Instruments PCE-UCD 100

£ 4,445.00

Price excl. VAT &. delivery
2 year Warranty

The NDT test instrument sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this material testing device enables accurate verification of concrete piles, concrete beams, and other components. This innovative NDT test instrument not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.

- Measurement range: -1677700 µs to +1677700 µs

- Resolution: 0.05 µs

- Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks

- Includes a camera for measuring crack width

- Bandwidth: 1 to 500 kHz

- Display: 10.1" TFT touchscreen display

- Internal storage: 8 GB

Ultrasonic Tester / Ultrasonic Testing PCE-UCD 100

£ 4,445.00

Price excl. VAT &. delivery
2 year Warranty

The ultrasonic tester / ultrasonic testing sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this ultrasonic tester / ultrasonic testing enables accurate verification of concrete piles, concrete beams, and other components. This innovative ultrasonic tester / ultrasonic testing not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.

- Measurement range: -1677700 µs to +1677700 µs

- Resolution: 0.05 µs

- Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks

- Includes a camera for measuring crack width

- Bandwidth: 1 to 500 kHz

- Display: 10.1" TFT touchscreen display

- Internal storage: 8 GB

Surface Testing - Gloss Meter PCE-IGM 100-ICA incl. ISO calibration certificate

£ 2,266.00

Price excl. VAT &. delivery
2 year Warranty

A gloss meter is a tester for determining surface gloss. Thereby, with the glossmeter, spectral reflections of a light beam that hits the surface, are measured. The touch screen allows for easy navigation.

- Measuring geometries: 20° / 60° / 85°
- Measuring range: 20° : 0 ... 1000 GU / 60° : 0 ... 1000 GU / 85° : 0 ... 160 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Air Sampler PCE-CPC 100

£ 4,138.00

Price excl. VAT &. delivery
2 year Warranty

The state-of-the-art air sampler enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the air sampler is done by an internal pump.

- Real-time measurement from 0.3 μm ... 10 μm

- Output in particles/28.3L or particles/m³

- Visual and audible alarm
when threshold value is exceeded

- Modbus RTU and MQTT via RS485

- Temperature and humidity measurement
- Real-time display of clean room class
ISO 14644-1

HVAC Meter PCE-VE 1500-22190

£ 20,670.00

Price excl. VAT &. delivery
2 year Warranty

With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.

- Diameter: Ø2.2mm / 0.08"
- Cable length: 1m / 3.2 ft
- Camera direction: 90°
- Resolution: 160,000 pixels
- Focusing range: 5 ... 50 mm / 0.19 ... 1.96"
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

Gloss Meter PCE-PGM 100-ICA incl. ISO calibration certificate

£ 1,397.00

Price excl. VAT &. delivery
2 year Warranty

- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Incl. ISO calibration certificate

NDT Tester - Gloss Meter PCE-PGM 100

£ 1,279.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-PGM 100 NDT tester or gloss meter works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the gloss meter emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.

- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU

Surface Testing - Gloss Meter PCE-PGM 100

£ 1,279.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-PGM 100 Surface Testing works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the Surface Testing emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.

- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU

Particle Counter Dust Measuring Device PCE-CPC 100

£ 4,138.00

Price excl. VAT &. delivery
2 year Warranty

The state-of-the-art particle counter dust measuring device enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the particle counter dust measuring device is done by an internal pump.

- Real-time measurement from 0.3 μm ... 10 μm

- Output in particles/28.3L or particles/m³

- Visual and audible alarm
when threshold value is exceeded

- Modbus RTU and MQTT via RS485

- Temperature and humidity measurement
- Real-time display of clean room class
ISO 14644-1

Dust Monitor PCE-CPC 100

£ 4,138.00

Price excl. VAT &. delivery
2 year Warranty

The state-of-the-art dust monitor enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the dust monitor is done by an internal pump.

- Real-time measurement from 0.3 μm ... 10 μm

- Output in particles/28.3L or particles/m³

- Visual and audible alarm
when threshold value is exceeded

- Modbus RTU and MQTT via RS485

- Temperature and humidity measurement
- Real-time display of clean room class
ISO 14644-1

Environmental Meter PCE-PVA 100

£ 1,136.00

Price excl. VAT &. delivery
2 year Warranty

The environmental meter is a useful tool to examine solar cells for their characteristics. With a DC voltage range of 0… 60 V and a DC current range of 0… 12 A, the environmental meter covers a large number of solar modules.

- Measuring range: 0 ... 12 A DC
- Three different test functions
- PC interface for data transfer
- Switchable graphic view
- Application, e.g. photovoltaic systems

Photovoltaic Meter PCE-PVA 100

£ 1,136.00

Price excl. VAT &. delivery
2 year Warranty

The photovoltaic meter is a useful tool to examine solar cells for their characteristics. With a DC voltage range of 0… 60 V and a DC current range of 0… 12 A, the photovoltaic meter covers a large number of solar modules.

- Measuring range: 0 ... 12 A DC
- Three different test functions
- PC interface for data transfer
- Switchable graphic view
- Application, e.g. photovoltaic systems